Ok I did this graphic a few years back for a website but now my original files have been corrupted and are not able to be opened. I have lots of similar fonts like ethnocentric but it is not quite right. I have also tried uploading it to font identifier etc.
View 6 Replies
I recently transferred all my work from a work computer to my mac at home. i am unable to access my work computer until October as we are having a 'break'. However, I have a deadline for September 15th and I need all my files.Some older files open perfectly fine but I fear there was a problem in downloading-perhaps due to my haste to leave and enjoy the beautiful weather! I tried downloading a Remo Repair software but unfortunately this was unable to launch.
Basic notes:
Created on Windows computer cs5
Trying to open on Mac cs5
Sd card used to transfer-couldn't eject, this may be the problem
Lately I've been finding that I've been having lots of corrupted image files -- many of my jpgs and even my psd's have strange bands of colour/image shifts that are permanent, and many of my tif files are now 'unparseable'.
Here is an example of this kind of corruption. Notice the bands of shifted colour and even shifted pixels:
What can be causing this? I'm worried because this is destroying my library of images. I have everything backed up to DVD which is good because I just checked and those files are fine -- so it is some sort of corruption, not software-related.
I was working on a big tif file 2g at size, I edit it with photoshop through adobe lightroom. Due to unknown reason, when i tried to save the file in photoshop, and I was informed the file is non-accessible. It ends up the file is disappeared from hardisk and I used some recovery software to retrieve the tif files. However, it seems a corrupted tif files which can't open in Photoshop or Irfanview.
the error message I got from photoshop is 'could not complete your request, because it is not the right kind of file'.. it is a tif file with layers.
I had tried to google and search, it seems there is no way to repair a corrupted tif files.
So my Photoshop CS6 is slowly corrupting files. I open psds to find nothing but a giant whit wall. I zoom out and the white disappears but then I can't zoom in any further than 50%. My rulers however, show that I'm zooming in. Then when I select another layer... it snaps to % I should be looking at. (Also... this particular file won't give me a preview in the icon on my desktop. Related?) This is not happening with all my files. Just the ones surrounding this particular project.
View 2 Replies View RelatedMy Photoshop crashed in the middle of saving. There's now a tmp file in its place. I tried opening it with Photoshop but it got an error. Is there any recovery program for getting back corrupted save files?
View 5 Replies View Related"extrusion file is bad or corrupted" error when a file is chosen, photoshop then "stops working" and windows shuts it down. I then have to restart to make another attempt.
View 3 Replies View RelatedOdd, and infuriating, problem. PS CS 5.5, Mac OSX 7.3 'Lion'.I was working on three small, not-complex PSD files. Each had been opened, saved, closed, reopened successfully several times.
When loading some .AI artwork to rasterize, Photoshop CS 5.5 got hung up on the open-file dialog box. I got the spinning beachball. Not only did PS stop responding to any input, but the entire Finder did - and eventually even the mouse cursor wouldn't move. I had to force a shutdown and reboot of the Mac.
When I got my system back up and running, I could no longer load those three files. Every time I try to load them, I get this error:'Could not complete your request because the file is empty.'
Acorn, Pixelmator, and Preview also fail to load the files. Preview tells me they're corrupted. Acorn and Pixelmator report unknown errors.Only one of those three fiels was actually open when Photoshop froze. Yet all three files have been affected.Their filesize on disk is non-zero - 70, 105, and 70 KB (small files, I know - 300 x 250 pixels, and again, not complex).
Duplicating the files doesn't work. Copying them to another volume doesn't work. They appear to be completely, permanently destoryed. Their thumbnails render in Finder, but the files refuse to open.Again, the files arenot huge, but they represent half a day's work.
When I render a project selecting an “HDV” setting, the result is corrupted. Only about 40% of the image height is displayed. The bottom 10% of the image is inverted to the top, followed by the next 30%, and the balance (the top of the image) is absent. (Audio is normal.) No difference whether I play these files on the PC or on a PS3.
I am using VideoStudio Pro X2. My source files are video only. I do not use transitions or titles.
I capture the video files with a Canon Vixia HF200. They are MTS files, ranging in size from 10MB to 300MB each. I download them to a Dell Dimension 4600 using a USB 2.0 port.
I create smart proxy files and I am able to edit them normally.
Project properties:
·Duration = 5 to 10 mins
·NTSC drop frame (29.97 fps)
·MPEG files
·24 bits, 720 x 480, 29.97 fps
·Lower Field First
·(DVD-NTSC), 16:9
·Video data rate: Variable (Max. 8000 kbps)
·LPCM Audio, 48000 Hz, Stereo
I am able to burn them to a DVD normally. Until sometime in March 2010, I also was able to create HD video files normally. Those old projects had the same properties as above. Those old files still play normally. But if I create a new HD video file now, it is corrupted.
Output format = “create video file,” and “HDV 720 – 30p”
Output Properties:
·MPEG files
·24 bits, 1280 x 720, 29.97 fps
·Frame-based
·(MPEG-2) (Transport stream), 16:9
·Video data rate: 18300 kbps
·Audio data rate: 384 kbps
·MPEG audio layer 2, 48 KHz, Stereo
Error Codes = none
This problem affects all “HDV” and “Blu-ray” output formats. Other output formats are OK. The files burn to DVD OK. (I have not tried burning a AVCHD disk lately.)
I downloaded and installed the latest version of DirectX using the link in one of the “Announcements” at the top of this board. This did not solve the problem. (In fact, now if I render a file using HDV 720-30p it does not show at all, and no audio.)
I downloaded and installed the patch for VS Pro X2. This did not solve the problem.
Since I upgraded to Lightroom 4 last week, I've had two occasions where Windows 7 operating system at boot tells me I have corrupt files on the separate 2TB drive I use to store Lightroom catalog and photos on. One difference between my LR3 vs LR4 settings was that I turned on the option to write XMP data to files per advice from Adobe evangelist that this is a better backup strategy in case LR catalog gets corrupt. Wondering whether the LR 4 background process to write out XMP is causing the problem.
It might be a self inflicted wound, as last night, I was importing iPad screenshot PNG files into Bridge, batch renaming them and then exporting them to hard drive as JPG (when is Lightroom going to support PNG?) and synchronizing that folder in LR4 so that I can view in LR4. Maybe the fact that I have LR4 and Bridge open at the same time and doing some operations corrupted them? LR4 got stuck at 1% progress in creating previews, so left the computer on overnight and when I come back in morning, black screen of death. When reboot, says I have to check that drive and finds lots of corrupt record segments. Never had this problem with LR3 and Bridge open at same time before LR4 and turning on the option to write XMP data to files.
I use a fully registered Lightroom 5.3 with my Canon 5D Mark III, and I have this kind of corruption on some of my CR2 files from times to times. If i reimport the .cr2 file in another catalog or even on another the resulting file is still corrupted.
The wierdest thing is that the original import was successful and I successfully exported it several times correctly. The corruption should have happens afterward:
This is absolutely inacceptable from a professional software.
PS: I had this kind of curruption with an old version of Lightroom with my previous pentax K7d, but I though this was past
I've been getting about one or two of these per 3000 photos recently, and obviously it's not a huge deal until it's the ONE image you wanted. I've gone back to the memory card and the file is fine when opened from the memory card and fine when I re-copy the image. Sometimes it's just the preview that looks like this, but when I open it in develop mode it's fine. The file also shows up corrupted when navigate to the folder and open it in photoshop.
This is a rather new phenomenon for me, last year in 125,000 images probably 3 total, but in the last month (10,000 photos) I've had 6. Is it the new version (4.4) of lightroom? Is it my hardrive? Is it my card reader? The only thing I think I've ruled out is my memory cards and camera.
having major issues with sheet sets in Autocad 2013 (actually we're using Autocad MEP 2013... but haven't gotten any responses to my post over in that forum so trying it here too). We use them constantly, and up til now they've worked great. In 2013, we can't get a .dst file to stay valid for more than 2 hours. You can create them & work with them just fine, but once you close & reopen AMEP it says the .dst is invalid, and it creates a new .dst of the same name in the same directory w/ 0kb file size. After that, nothing works... view names, sheet titles, etc., everything that is driven off the sheet set. And of course every time you have to recreate a sheet set, you have to recreate every detail callout, sheet title, detail title, etc. in the set of drawings.
We've installed AMEP 2013 SP1, doesn't make a difference.
All of our machines are Win7 Pro, mixed 32- & 64-bit, with plenty of processor/memory/graphics capability. Our standardization stuff runs off of our network/NAS drive.
I just downloaded lightroom 5.4 the other day and today was the first time I went to download images with it.
I could review all my images before I plugged my card into the card reader and attempted to download them, when I opened the import window in lightroom the first image on the card had a preview, but it was greyed out and the rest of the images came up with the .CR2 icon and when I tried to import them I got an error message saying that the files cannot be read.
I tried ejecting the card and putting it back in my camera, but now I can't see the images on my camera either or save them manually to my hard drive.
The files are from a Canon 5D mk II and I shot all the images in RAW with no JPG's.
I recently downloaded Adobe Design and Web Premium CS6. I am not able to see the content of any of the file I open (.psd or .jpg). I do see the file has been opened as the file name appears on the open file tabs, I also see the preview of the file in the Navigator Window and list of layers in the layers window.
I am relatively new to this so might be missing on some option that needs to be turned on or something. I am using Window 7 Professional, Service Pack 1, with 8GB RAM.
NEF can't be opened on my PSE 8.0. how to work the PSE work properly in Japanese.
View 4 Replies View RelatedWhen exporting points to a .TXT using PNEZD the elevation goes haywire.
After being exported it reads roughly 69000 in an area where the elevation should be about 5400 to 5800 feet
(very roughtly a factor of 12)
Is there a variable I can change to fix this?
Is there an option to make PS never lock an opened file as a background layer? I never need to have the files that I open locked so I would like to skip the step of unlocking them every time..
View 17 Replies View Relatedi often scan in images, roughly 50 at a time, in the order i want them saved/numbered in. When i go to batch save, (along with some color correction and other small things) it numbers my files from the LAST image i scanned in to the first.. IE; what should be image50.jpg is image01.jpg and vice versa.. basically its doing the naming in reverse.
I never had this problem in PS7, only since moving to CS2.
Trimble Access, Civil 3d 2012 export road problem
when I export a road file to my TS2 it becomes corrupted (file size 50% of what it should be.
4 months ago there was no problem. The weird thing a is that the other worstation in the office has this issue to.
Here's what I have done to troubleshoot: swapped out both data collectorsexported this rxl file to a virtual instrument on my desktoptalked to cansel and autodesk but the said they haven't seen this problem. I can rule out the following.
trimble/autodesk software, hardware ( to much a coincidence that both work stations have this problem)Data Collectors swapped out - file size of the corrupted rxl were the same on the virtual deskto instrumentcorrupted dwg - exported a road six months ago, now re-exported and the new file is corrupted.
Both machines are identical:
Pentium Zeon
16 gb RAM
Identical software installation
How do you delete the recent photos from the (file drop down) under recent open ?
View 3 Replies View Relatedmy images looking quite harsh when opening the raw files, this didn't happen on the trial version, i've only just got the cs6 from adobe so is there a setting i need to change?
View 4 Replies View RelatedI recently upgraded from CS6 to CC. When I open a psd file, it opens at 100%, but the window is small with scroll bars. I have plenty of screen real estate, so that's not the problem. I have looked everywhere and can't find how to make the default 100% showing the entire image.
View 7 Replies View RelatedIs there a way to remove Recently opened files (File>Open Recently Edited File)?
View 4 Replies View RelatedTune up utilities got into my system and was finally removed by windows installer today. I tried 2 times to repair Autocad2011 civil 3d, then 3 times to reinstall it, finally removed all files I could find and tried 2 times to install. Cannot install I get eror 1402 about the key being too full or somtehing like that. It is the student version but I use it for my own use and need to access the files.
View 3 Replies View RelatedIllustrator actually makes a file labelled "copy"everytime the particular file is opened. Each time it is opened, it makes another copy & tags a number on the end. It only happens with the occasional file, but once this happens, nothing will stop the problem. Selecting all & pasting into a new file does not work. There are no extra views. The artwork is originally copied from the customer file & pasted into a new document.
Mac Pro 2 x 2.4 Ghz 6-Core Intel Xeon/OS X 10.8.2/CS 6 Design Standard
I have been opening my Illustrator vector images in Photoshop to save as JPGs today. All was working fine when all of a sudden I open in PShop, Now all I get is a transparent box. On both rasterized and non rasterized images. This is the latest trial AI/CC by the way. Restarted both programs.
View 3 Replies View RelatedI made these bunch of other parts at school this time and they use 2013 and I use 2014 at home, will I be able to open them
View 2 Replies View RelatedThe following code will explain how it works:
[CommandMethod("RenderFromFile")]public static void RenderFromFile(){string dwgPath = @"C:TempRender.dwg";string imagePath = @"C:TempRender.png";Document doc = Application.DocumentManager.Open(dwgPath);RenderToFile(doc, imagePath);}
[Code]....
The command RenderFromFile will render the 3D drawing file at C:TempRender.dwg (see this file from attachment), and then write the output image to Render.png at the same folder. The rendered image is on the top view and has visual materials.
The command RenderCurrentView will render the current open 3D drawing, then write the output image to C:TempRender.png. The rendered image is on 3D view and does not have visual materials.
Both two commands call the same shared method RenderToFile(), but their output images are different. I don't know why they are different?
Method RenderToFile is a simplified version from Kean's code. I try to make the code short and simple to easily solve the problem.
My team is using AutoCAD 2014 and multiple people have noticed that while they're working, when they try to save the file it pops up a message saying the file is read only.
Multiple people on our team has had this issue and it only started recently. (We've had it installed a few months now).Could it be the new file tabs feature in 2014?
I am trying to import a set of .model files from CATIA which can be opened individually using MAX2013 DirectConnect importer, however when trying to import the CATProduct files which has all the .model files organised as an assembly I get an error message (also attached):
Starting process : Translating to APF
DirectConnect did not successfully complete the file conversion. The error code was: -1073741819
