VideoStudio :: PROX5 Corrupted After Installing Instant Project
Dec 30, 2012
Everything was working fine with my VS PRO X5 program until after I downloaded and installed the following "Instant Template" from within VS. I chose the one which has a surfboard in it's bmp on the page with all the other Instant Projects to choose from.
C:UsersNEWDocumentsCorel VideoStudio ProVSPTemplate 039_HD-Project. I think that download might be corrupted because that's the ONLY thing I've downloaded/installed to VS before this happened.
Immediately after installing that project, my computer would freeze immediately as soon as I either loaded it up, or clicked on any of the icons such as "Instant Template," etc. Even CTRL/ALT/DELETE fails to operate normally.
All my system files are up-to-date, no viruses/malware found, rebooted computer to flush memory, etc. before starting VS. The same problem happens each time, and ONLY with Video Studio. Sometimes, if I wait 5 minutes or so while the hourglass is spinning and the top bar says "Video Studio is Not Responding," suddenly, it will then begin working. But, it works only until I click on the Instant Template choice again.
Question: How do I uninstall or else get rid of the VS additional downloaded files, SAFELY, without losing any of my previous creations and files, or VS default templates, etc.? Will I have to uninstall VS completely and reinstall it? If so, what is the correct procedure recommended to do that. I can no longer use my program.
View 5 Replies
ADVERTISEMENT
Jul 8, 2011
Using VSP X4. I have d/l one of the templates that has a complete video w/ placeholders. All of the placeholders except the first one are flat rectangular images which are easily replaceables, the first one that is a 3d Type of rectangle with a slant. How to replace it. How to adjust the image to fit into this 3d placeholder?
View 10 Replies
View Related
Sep 23, 2011
Is there anyway to insert these projects to the timeline at any random spot, versue the defaults to place at the beginning or end? Seems so limited that you only have those options. If you edit forward and only add material to the timeline as you need it, then it is no big deal to insert to the end... but if you add all your material to the timeline at once and then decide "oh, lets use an instant project here" then it is difficult to place in the middle.
I've copied some of the images in the templates to my library so that I could mimic those effects ( copy same attibutes to a clip) at anytime I want... just seems like there must be an easier way.
View 4 Replies
View Related
Oct 31, 2012
VSX5. Instant project vertpanels 2 Is there a way to slow the speed down(or pause) some of the placeholders so that they on the screen longer.
View 6 Replies
View Related
Nov 12, 2011
I downloaded the trial version of pro 4x and love the video clarity and smoothness....even running at 60FPS. However, when I try to start editing with the "Instant Project", I start to have issue.
1. The intro is fine.....very smooth
2. However, when it gets to the video portion, the quality and "shuddering" of the vidoe is horrible.
View 2 Replies
View Related
Oct 24, 2012
How do you insert a title into an instant project place holder without the number in the placeholder background showing.
View 1 Replies
View Related
Oct 21, 2012
I have inserted instant project T04 in my VSX5 timeline and imported an image into the placeholder.I distorted the image to (what I thought) fit the placeholder.When I play it back, the imported image is not a perfect fit in the place holder frame.I cant find a way to get back to the overlayed image so that I can fine tune the image to fit the placeholder.
View 1 Replies
View Related
Aug 8, 2012
---first, I am NOT referring to the "extra" templates, etc. you download after the program is installed... (the vpt files) -- I understand how to install these & already have them installed properly
---I have a VS X4 DVD... the program from this DVD is installed on my desktop... I also just installed it on my on my laptop since I will need to work on my projects on the laptop for awhile
---When I opened the program on the laptop, I discovered many Instant Project templates there I don't have on my desktop [in the "beginning", "middle", "end" categories... After quite a bit of comparing & searching, I believe these were never installed on my desktop for some reason! [I found the file names on the laptop, but they are nowhere to be found on my desktop]
---I tried opening the program DVD to install them from there, but it's not obvious to me where they are...
These Instant Project templates would really be useful to me --
1) why did they install on the laptop but not on the desktop
2) how can I get them installed on my desktop WITHOUT uninstalling and re-installing the program? Is there an "easy solution?" I don't want to risk losing all of the other extras I already downloaded, etc. & needing to start all over!
One file which is part of one of the templates is called "HM_Multioverlay track 01_Start.wmv" ----- On my laptop, it resides in the C:Program Files (x86) CorelCorel Video Studio Pro X4en-USEditing StyleStyleBeginningNTSC26_HM_MultiOverlay track01.wvs [this can't be found on my desktop]
View 11 Replies
View Related
Apr 23, 2011
I have downloaded few instant project templates Yet when I go to the Instant project window I do not see the import Icon . I only see the orange Icon(get more content). Is there something wrong with the installation of my VSPro x3.
View 1 Replies
View Related
Jun 30, 2013
My computer crashed and had to reinstall everything, well almost everything, still re-installing. The issue that I am having is the Instant Project-Wizard button/icon, that is suppose to be located above the Timeline is not being displayed. This applies to both programs, VideoStudio X4 & X5 versions.
View 1 Replies
View Related
Feb 15, 2012
I've got a project file that I've been working on for a few weeks. I made a couple of changes to it today and now it will not play through completely. It stalls right at the same spot each time and no matter what I delete in the project (trying to remove the offending element) it still stalls. What I mean by stall is that the player stops and the play button reappears. if I press play again, it plays a few frames and stops.
I'm using VideoStudio 4.
View 2 Replies
View Related
Jan 2, 2014
i´m having a problem opening a premiere pro cs6 project from another computer. My partner can open the project in her computer, but when she sends me the project by mail and i try to open it in my computer i I get t the mesasage " Cannot load project". I´ve tried importing the project into another project but it doesn´t work.
View 2 Replies
View Related
Jan 3, 2014
I got this message when trying to load a WIP file: "The project could not be loaded, it may be damaged or contain outdated elements."
I've searched the forums as well as on other sources on how to deal with it. So far I've tried:
1. Check files on AutoSave folder. No luck. All 5 files gave the same message
2. Fix XML with XML wrench. Tried the "Check is Well Formed" & "Check is Valid" and both said ok"
3. Restarted PC. Same thing.
4. Move project and working files to other folders - same.
5. Created a blank project and tried to import sequence - no sequence show up.
6. Import from After Effects and Exported - no luck as well. Came up with a message saying there's no valid sequence.
Some info:
Adobe Premiere Pro 6.0
Windows 7 64bit
Using Plural Eyes plugin
View 8 Replies
View Related
Nov 15, 2011
I am using an instant template at the end of my video. I am trying to add photos to the placeholders. I tried control click and drop to the placeholder but that isn't working.
View 3 Replies
View Related
Mar 28, 2013
I had videostudio 4x which was upgraded from 2x on a laptop computer. I recently got a new desktop and loaded the X4 on that. The laptop has many files listed to choose from when I go to the instant projects. They are listed under the drop-down menus "beginning", "middle", "end", "complete", etc. There are probably 20-40 choices for each drop-down choice.
On my new install, there is only 1 choice on each. I did not purchase any add on templates. How do I get the others back? Is there a way to transfer them from the laptop?I tried loading some templates from the help button/do more tab and downloaded and installed the templates there, but got only some very simple templates that went under the "custom" drop-down menu.
Was there some free template pack that I downloaded or got on the original X2 disk, or X4 downloaded program that I did not install to the new computer or that I downloaded after installing the X4?
View 5 Replies
View Related
Nov 21, 2013
Some of the Instant Projects in VideoStudio 6 might be useful if one could remove the "VideoSudio" text from them and maybe even add new text. Is there a way to do that? If not, what are they for?
View 5 Replies
View Related
Aug 22, 2011
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
View 7 Replies
View Related
Oct 24, 2010
When I render a project selecting an “HDV” setting, the result is corrupted. Only about 40% of the image height is displayed. The bottom 10% of the image is inverted to the top, followed by the next 30%, and the balance (the top of the image) is absent. (Audio is normal.) No difference whether I play these files on the PC or on a PS3.
I am using VideoStudio Pro X2. My source files are video only. I do not use transitions or titles.
I capture the video files with a Canon Vixia HF200. They are MTS files, ranging in size from 10MB to 300MB each. I download them to a Dell Dimension 4600 using a USB 2.0 port.
I create smart proxy files and I am able to edit them normally.
Project properties:
·Duration = 5 to 10 mins
·NTSC drop frame (29.97 fps)
·MPEG files
·24 bits, 720 x 480, 29.97 fps
·Lower Field First
·(DVD-NTSC), 16:9
·Video data rate: Variable (Max. 8000 kbps)
·LPCM Audio, 48000 Hz, Stereo
I am able to burn them to a DVD normally. Until sometime in March 2010, I also was able to create HD video files normally. Those old projects had the same properties as above. Those old files still play normally. But if I create a new HD video file now, it is corrupted.
Output format = “create video file,” and “HDV 720 – 30p”
Output Properties:
·MPEG files
·24 bits, 1280 x 720, 29.97 fps
·Frame-based
·(MPEG-2) (Transport stream), 16:9
·Video data rate: 18300 kbps
·Audio data rate: 384 kbps
·MPEG audio layer 2, 48 KHz, Stereo
Error Codes = none
This problem affects all “HDV” and “Blu-ray” output formats. Other output formats are OK. The files burn to DVD OK. (I have not tried burning a AVCHD disk lately.)
I downloaded and installed the latest version of DirectX using the link in one of the “Announcements” at the top of this board. This did not solve the problem. (In fact, now if I render a file using HDV 720-30p it does not show at all, and no audio.)
I downloaded and installed the patch for VS Pro X2. This did not solve the problem.
View 3 Replies
View Related
Jan 1, 2013
I am trying to use Video Studio Pro X2 to create a DVD on my new Windows 7 PC. I have produced the project file (95 minutes) and am now ready to burn the disk. I have used the software before on my old PC (Windows XP) with no problems. From the "Share" menu I selected Create Disk and DVD.
I am trying to amend the Project Settings in order that the project file (lasting 95 minutes) fits nicely on a 4.7Gb Disk. I have set-up a Disk Template (which should hopefully produce a file about the right size) and want to select that template for my project. The problem I am having is that when I select Create Disk, the Project Settings button is not displayed, so I cannot select the template I have set-up. The Project Settings button should sit just to the right of the Settings and Options button on the bottom left of the screen, just under the main panel (according to page 146 in the manual), but on my screen (see image attached) all I can see is the Settings and Options button, and then a half-obscurred "Next" button (which should sit on the right of the page, but on my page it is on the left, partly hidden by the Settings and Options button). There is also no "Close" or "Change Display aspect ratio" buttons visible too, which are shown in the manual, but don't appear on my screen.
This is the first time I have used VS Pro X2 on my new Windows 7 PC - it worked fine on my old XP machine and I have never had this problem before. I am now using Windows 7 (64 bit version). I have tried doing a "Repair" to Pro X2 using Control Panel, but this has made no difference...I am still getting this corrupted page without the very button I need to change template. Any way I can create a file that is about the right size to fit on a 4.7Gb blank Disk.
View 3 Replies
View Related
Feb 27, 2012
I cannot access my program for some reason and it tells me reinstalling might solve my problem.However, when I start the reinstall process, it asks me are you sure you want to delete the program.Well, I want to keep all my hard work, photos, videos, etc. Won't reinstalling delete all this.
I bought x4 bundle package and was going to install it over x3, but not sure that will solve my problem either. Can or should I install x4? I have the program installed on an external hard drive and can access my photos and stuff, just can't launch the programs.
View 2 Replies
View Related
Mar 6, 2013
I don't understand how to install mp3 into video studio pro x5 ? I am installed k-lite mega codec pack, then, ffdshow_rev4499_20130104.
I am choose *.avi , 30 fps, 800x600 , h264 (from k-lite) (2000 kbs, ultrafast, tuning:film) and want to choose mp3 , but i can't find it. 1question : How to install MP3 into pro x5
I am capturing avi file with (h264, 4000 Kbs, ultrafast) and (pcm,1114 kbs). BUT!!! in "project" mode it is playing very slowly! .. and i must to convert it to mp4 file with h264(4000kbs, ultrafast, level 4.1) and aac(192 kbs). This second file is better to playing in "project" mode.
Is there any problems with avi-container in video studio?? or it is my problem?? i saw that proxy files are dont creating in avi(h264,pcm) .
so my 2 question is: Why video studio cant read normally and played it in "project" mode normally? where is problem?
View 10 Replies
View Related
Mar 17, 2012
I currently have Video Studio Pro X4 on my laptop, but my laptop does struggle sometimes with HD video editing.
I now have been given a desktop PC with a faster processor, faster graphics card and more memory.
I obviously now want to move my software from my laptop to my desktop and don't want to have to buy a new licence for the software.
Can I just unistall the software from my laptop, and then put a new install on the desktop PC, or is it more complicated than this?
View 4 Replies
View Related
Mar 1, 2011
I would like to know how do install NewBlue Fx Essential ll & lll in videostudio pro x4
View 9 Replies
View Related
Oct 28, 2012
clarify if I am allowed to install X5 pro on 2 computers? Like I did with X4 en versions before? I noted that X5 ask registration to use the Core Guide, Do More, Get More, etc feature. What will happen in the case of a Windows re-installation - do I need to register again?
View 2 Replies
View Related
Apr 13, 2012
I downloaded VS X5 and I want try NewBlue FX, but when I download trail of NewBlue, the installation ask me where install the plugin ! But normally it's automatic ? perhaps it's NewBlue whoes isn't available for X5,
View 11 Replies
View Related
Dec 7, 2011
VIDEOSTUDIO X4 installing error 1402.Could not open key. I can't install my videostudio x4 by this error.
I don't know what's mean that error 1402,I seached many answers no error 1402 ,
View 2 Replies
View Related
Oct 11, 2010
With VS 11+ not running on XP Home I went to
[URL].......
to download the New Blue Cartoon filter. I Selected the Host Platform as Windows In the free effects set up box VS was already selected Destination folder was designated as prog files New blue free effects for windows.
In the New Blue Free Effects install Assist for VS box it said that the path would be to the vft.plug (via prog filesUL SystemsULVS11). In my VS11+ vft_plug folder-- New Blue Cartoonr,vtf files 131kb and date modified 26 06 2010 showed.
But the filter is not there in the filter library of VS.Did not show on reboot either.I was not asked to register.
View 14 Replies
View Related
Jan 12, 2011
I have VS Pro 3.I have some Digital Juice Editor's Toolkits also. I read some of the postings and did the export of the wipe to AVI which looks good. So how do I install that as my transition effect.
View 1 Replies
View Related
Oct 4, 2013
I have a Windows 8 64-bit system. Why Corel VideoStudio X6 has Windows Media Encoder 9 Series included in the installation package. It is not even supported on Windows 7 and 8. [URL]
View 1 Replies
View Related
Apr 13, 2013
Moved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
View 1 Replies
View Related
Aug 25, 2011
In the past I've used a Panasonic SDR-S7 video camera which produces MPEG files with no problem.
I now have a Panasonic Lumix still camera which also takes AVCHD video. The individual files play perfectly in VS12, but as soon as I try to play the project to preview it, the picture keeps freezing. I thought this could be due to the new video's being HD but I don't think the individual files could be played either.
View 9 Replies
View Related
