I have VS Pro 3.I have some Digital Juice Editor's Toolkits also. I read some of the postings and did the export of the wipe to AVI which looks good. So how do I install that as my transition effect.
View 1 RepliesI was making a website and I wanted to make a pattern that looks like one color turning into another color by way of small circles increasing in size. I've created a small mock-up of the type of effect that I want to make, and what is the name of the effect, or how to do it. But for some reason it doesn't let me post the image.
View 2 Replies View RelatedI just added 3 new blue fx transition packages to VS Pro X4 and have others to add ( boris, canopus, adorage).... I noticed that the first 2 new blue packages ( 3d explosions and 3d transformations) were successfully added to their own category in the drop down list of transition effects, so now the list includes the new blue sampler that Corel provided, and both these additional packages. When I added the third package New Blue Paint Blends, it did not appear in its own category but the effects are present when you click on "all".... ( which is a nuisance to search through). I'm wondering if the problem that existed in VS2 where by there were a limited number of transition categories you could have is still a problem in VS pro X4 or whether this is an issue just for Paint Blends. I'd like to know before I add on the other packages... I hate for all the effects ( 100s of them) to end up in my "all" list.
Also is there any way to manipulate this list... and force a location?? I can only see that all the effects are listed individually in the Vfx_plug folder.
I cannot access my program for some reason and it tells me reinstalling might solve my problem.However, when I start the reinstall process, it asks me are you sure you want to delete the program.Well, I want to keep all my hard work, photos, videos, etc. Won't reinstalling delete all this.
I bought x4 bundle package and was going to install it over x3, but not sure that will solve my problem either. Can or should I install x4? I have the program installed on an external hard drive and can access my photos and stuff, just can't launch the programs.
I don't understand how to install mp3 into video studio pro x5 ? I am installed k-lite mega codec pack, then, ffdshow_rev4499_20130104.
I am choose *.avi , 30 fps, 800x600 , h264 (from k-lite) (2000 kbs, ultrafast, tuning:film) and want to choose mp3 , but i can't find it. 1question : How to install MP3 into pro x5
I am capturing avi file with (h264, 4000 Kbs, ultrafast) and (pcm,1114 kbs). BUT!!! in "project" mode it is playing very slowly! .. and i must to convert it to mp4 file with h264(4000kbs, ultrafast, level 4.1) and aac(192 kbs). This second file is better to playing in "project" mode.
Is there any problems with avi-container in video studio?? or it is my problem?? i saw that proxy files are dont creating in avi(h264,pcm) .
so my 2 question is: Why video studio cant read normally and played it in "project" mode normally? where is problem?
I currently have Video Studio Pro X4 on my laptop, but my laptop does struggle sometimes with HD video editing.
I now have been given a desktop PC with a faster processor, faster graphics card and more memory.
I obviously now want to move my software from my laptop to my desktop and don't want to have to buy a new licence for the software.
Can I just unistall the software from my laptop, and then put a new install on the desktop PC, or is it more complicated than this?
I would like to know how do install NewBlue Fx Essential ll & lll in videostudio pro x4
View 9 Replies View Relatedclarify if I am allowed to install X5 pro on 2 computers? Like I did with X4 en versions before? I noted that X5 ask registration to use the Core Guide, Do More, Get More, etc feature. What will happen in the case of a Windows re-installation - do I need to register again?
View 2 Replies View RelatedI downloaded VS X5 and I want try NewBlue FX, but when I download trail of NewBlue, the installation ask me where install the plugin ! But normally it's automatic ? perhaps it's NewBlue whoes isn't available for X5,
View 11 Replies View RelatedVIDEOSTUDIO X4 installing error 1402.Could not open key. I can't install my videostudio x4 by this error.
I don't know what's mean that error 1402,I seached many answers no error 1402 ,
With VS 11+ not running on XP Home I went to
[URL].......
to download the New Blue Cartoon filter. I Selected the Host Platform as Windows In the free effects set up box VS was already selected Destination folder was designated as prog files New blue free effects for windows.
In the New Blue Free Effects install Assist for VS box it said that the path would be to the vft.plug (via prog filesUL SystemsULVS11). In my VS11+ vft_plug folder-- New Blue Cartoonr,vtf files 131kb and date modified 26 06 2010 showed.
But the filter is not there in the filter library of VS.Did not show on reboot either.I was not asked to register.
Everything was working fine with my VS PRO X5 program until after I downloaded and installed the following "Instant Template" from within VS. I chose the one which has a surfboard in it's bmp on the page with all the other Instant Projects to choose from.
C:UsersNEWDocumentsCorel VideoStudio ProVSPTemplate 039_HD-Project. I think that download might be corrupted because that's the ONLY thing I've downloaded/installed to VS before this happened.
Immediately after installing that project, my computer would freeze immediately as soon as I either loaded it up, or clicked on any of the icons such as "Instant Template," etc. Even CTRL/ALT/DELETE fails to operate normally.
All my system files are up-to-date, no viruses/malware found, rebooted computer to flush memory, etc. before starting VS. The same problem happens each time, and ONLY with Video Studio. Sometimes, if I wait 5 minutes or so while the hourglass is spinning and the top bar says "Video Studio is Not Responding," suddenly, it will then begin working. But, it works only until I click on the Instant Template choice again.
Question: How do I uninstall or else get rid of the VS additional downloaded files, SAFELY, without losing any of my previous creations and files, or VS default templates, etc.? Will I have to uninstall VS completely and reinstall it? If so, what is the correct procedure recommended to do that. I can no longer use my program.
I have a Windows 8 64-bit system. Why Corel VideoStudio X6 has Windows Media Encoder 9 Series included in the installation package. It is not even supported on Windows 7 and 8. [URL]
View 1 Replies View RelatedI find myself needing to put a colour border on a wipe and I can't for the life of me find the option.
View 7 Replies View RelatedIt would seem that after closing a drawing with the wipe out frames set to "D" (Display, but don't plot), then opening that drawing, the wipe out frame state is set to "On".
View 4 Replies View RelatedACA2011
Is it possible to create a block with a 'mask' or 'wipeout', or whatever ACAD has, that is in the block so that when inserted, it blocks out whatever is behind it? I need to create a sprinkler symbol for a reflected ceiling plan (RCP), but my RCP has a lot of graphic hatching and needs to be blocked out wherever I insert this sprinkler block.
I have forgotten how to wipeout the hatching in back of text!
View 6 Replies View Relatedin paint module, when i do the 'wipe' , i only can wipe the single/current frame. I can't find the setting to wipe the whole clip. am i allowed to wipe the whole clip using a single click ?
View 1 Replies View RelatedI had to wipe and reload windows. I never got to deactivate my software.
What do I do?
Is there any way to put border line for wipe transition?
View 3 Replies View RelatedI'd like to wipe out the message in the picture and add a text that looks hand written saying: "My name is MelanySlave"
I want to get into handwriting editing on Photoshop so if possible.
Attachment 29331
Is there a quick and easy way to delete all symbols in the Symbol Manager docker? I know there is a macro that converts symbols to objects but the macro does not affect this part the document that has ANOTHER set of Symbols....know what I mean? Maybe a macro that digs and wipes out all symbols in the docker?
It takes a REALLY long time just to delete them one by one...even multi-selecting did not work.
Is there an easy way to remove all the wipeouts in a drawing without deleting the entities they are attached to?
I have hundreds in some drawings, so I am trying to do a mass editing through lisp, but it won't remove just the wipeout, the text grouped with it gets deleted too.
If the eraser tool does not perform the above function, how should I make afeature request?
View 1 Replies View RelatedI am using P'shop CS3, I need to make a gif that hyperlinks to my separate web based pdf file.
The gif is sent to a 3rd party, who insert it into their pdf, before distributing it via email.
When people receive the 3rd party pdf, I want them to be able to click on my gif to open my web based pdf.
I've searched hyperlink in the help files, and am obviously not searching very well as I can't find anything?
i am having a problem with my registration, when adobe photoshop sc3 loads up it asks me to "never register,register later or register now". i can not seem to press any buttons, they do nothing. i have had this problem before with adobe acrobat, all i done with that is edit the registary.
View 3 Replies View RelatedI use third party plug-ins from two different companies and they all worked during my PSCC trail period, but now PS won't recognize any of them. I've tried re-installing them using the custom install process, but they still don't work.
View 6 Replies View RelatedI am trying to install the Kodak DigitalROCProv2.8bf filter in Photoshop CC. I got it to work in PSE 11 and 12 buy setting the additional plug-ins path. Their support is useless, so that's why I am trying here.
View 2 Replies View RelatedI Installed Photoshop CS5 on my Computer.Went to a Third Party Obsidian Dawn Website Dowmloaded Skin Texture Brushes. Unziped the File to a Brush Folder.In the Brush Folder I Copied the Skin Texture Brushes.arb.Went to Drive C Left Click on It.
Double Left Click on Program Files.
Double Left Click on Adobe.
Double Left Click on Photoshop CS5.
Double Left Click on Presets.
Double Left Clickon Brushes.
Then Pasted Skin Texture Brushes.arb in to Brushes.I Opened up Photoshop CS5 Left Click on Brushes.Viewed the Brush Listings the Skin Texture Brushes Displayed they all Worked just Fine.I Had to Reboot My Computer.Then Reinstalled Photoshop SC5.Installed the Third Party Download as Mention Above.Then I Instaled Skin Texture Brushes.arb as Mention Above.
I Viewed the Brush Listings the Skin Texture Brushes Did Not Display.I Tried Several Times but no Results
I have an idw that will not check in because a 3rd party file is missing. When I expand the browser, I see this file "barGrate&.bmp" that is missing. I can delete everything out of the idw and this third part app node is still there.
How do I delete this, or find what is referencing it. I can't check the idw in until this is corrected.
where I need to create a custom menu item on the photoshop menu bar, display a pop-up window with some text box fields on click of the menu item and capture the values from the pop-up and pass iton to some 3rd party tool to do some processing. Is this all just possible without using Photoshop SDK and just by using some scripting?
View 1 Replies View Related