I am new at doing a ODBC connection and when I try to connect a database through our central system, this is the error message I got.Failed to cache features.
Failed to execute Fdo command. (2 consecutive occurrences)Table does not exist for class 'dbo:View_DH_UTM_COORDS (2)' (2 consecutive occurrences)
I am having a problem to connection to data, the new file connection is properly connecting to data , if I going to add new data , I am getting this error as shown below.
Failed to cache features.
Failed to execute Fdo command.
ORA-03135: connection lost contact Process ID: 11779 Session ID: 4 Serial number: 6917
Here's the text:
1. Should Media Cache Files and Media Cache Database be in separate folders? Does it matter?
2. Can I open an "in progress' project from P Pro CS4 with CC P Pro and continue editing?
I have some dwg files, shp files, images, and sdf files in my C: . I am using AutoCAD Map 3D 2011. When I try to open one of the dwg files it is showing a warnng message "Failed to open FDO connection".
View 2 Replies View RelatedHere is the Scenario, Win 7, 64 bit, Office 2010, and yes I have installed 64 bit drivers, with Map 2012.
I have an Access Database with Water and Sewer information. I connect thru FDO and every thing is great. I make a change or add something to the Access Data Base and I don't see the change until I disconnect and then re-connect? I was under the assumption that this was a live connection? Is there a way to refresh the connection without having to dis-connect and then re connect?
When attempting to attach WMS data, Map Task Pane>Display Manager Tab>Data>Data Connect dialog>Data Connections by provider.
After entering the server name or URL and choosing "connect" I get the following errors:
"Failed to open FDO connection"
"The HTTP request URI was not found by the server"
It seems to work just fine for other users using the same steps.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
On the newest addition of Corel VideoStudio, I've been trying to upload a video to youtube (a 30 second one). Everytime, right before it's finished uploading on Corel I get the error message 'Upload failed due to a connection error. Please check your connection and try again'. I've tried uploading it to 4Mpeg-HD and MPEG-4. I've tried converting the video to various different files (Avi 750x576, MP4 704x480, etc). My computer's internet is perfectly fine and extremely fast, without any lag. I'm hoping to upload the video through Corel only because, despite my fast internet, I waited over ten minutes on a manual upload for the same video on youtube and after those ten minutes were up it was still at only 4%.
View 1 Replies View RelatedI made it through a project with a few Smoke crashes, mostly on a particular clip. Then when I go back to make revisions a day later I get this message:
Error: VOLUMEMGT: Failed to initialize Stone+Wire connection.
Everything was working fine up to that point besides the few Smoke crashes that recovered with no problem.I am really in a bind now and need to finish this project urgently.sw_logs_2.txt
I get error error "Failed to Initialize Stone + Wire connection when I start Smoke 2013. It working fine for 3 weeks.I uninstalled, reinstall, and still cannot get it to work.
Do I need to get a new download? Someone said it may be due to my internet connection.
I am working on the AutoCAD customization and doing the same by VB.Net & C#.Net. But I just want to know the difference as mentioned below:
1. Insert Block In AutoCAD
Using VB.Net without using DataBase services..Only 1 statement is required to Insert the Block objAcadDocument.ModelSpace.InsertBlock(Required Arguments are here) Using C#.Net with DataBase services
There are many statments are there to insert only 1 block..Like Start Transaction, Lock the document, Get the Object Id Block etc...So my quetion is that when I have to use DataBase services and when not
what is the advantage of doing customization using DataBase services rather than go for wihout DataBase services.?
Is there any way to set features to be invisible when create sketch after those 3D features so as to make the sketch more easy to see?
View 3 Replies View RelatedMap 3d 2011.User A connects to SDE using FDO and creates a dwg containing Mastermap data and other shape files held in SDE.User A saves Map 3D dwg on network drive that all users can access where all acad dwgs, docs etc. for that project are stored.
User B who is working on the same project at another PC tries to open the Map 3D dwg created by user A from the shared network drive but gets a "Failed to open FDO connection" error and cannot open the dwg.
Is this because Map 3D caches all data from SDE on the local drive of the PC on which the dwg was created?Is there a way around this to allow both users to access the same drawings?
I am also having the "could not write to internet cache" message in Autocad 2013. I have removed and replaced the AcInetEngine19.dll and AcInet Engineps19.dll files with the files in Byron Norales has supplied in these discussion gropups, However I still get the same "could not write to internet cache message" when opening files?
View 1 Replies View RelatedI connected a few .shp files in Map3D for references and now I want to removed these connections. All can be deleted expect one. Under the Verify Delete Connection table, I selected the Dependent Resources and click OK and nothing happen. It is still there. How can I get rid of it?
View 1 Replies View RelatedI'm trying something I believe to be fairly basic: I'm trying to get some base mapping into my Map 3D drawing.
In particular, I need to get the World Street Map found here: [URL] ......
In Map, under Data Connections, I'm using "Add WMS Connection"
I give the connection a name, enter the Server name, and leave Version on "Default version"
I leave username and password blank.
But I always get the error message: "Failed to connect."
Do ESRI and AutoCAD just not play well together?
Suddenly, I'm no longer able to add shp files to my map. I can connect and select the schema that I want to add, but when I click on the add to map or add to map with query, the the check box next to the schema clears itself and nothing happens.
Win 7 Pro 64bit
C3D 2011 version 3 64bit
We have this public server in Indiana that I am trying to figure out if Map 3D will connect to. The directions on how to connect are here: [URL] ........
If Map 3D 2012 is able to connect to this data? I cannot get it to work, but I am not a Map / GIS expert by any means.
I'm trying to get connection to WMS; however after the connection is made, I don't get any layers in my list.
I've been trying many times, and the same result.
The situation is that the original Imagery were in LL84 and the provider transferred them to local CRS; since then I don't get any layers to view! Though I was able to see them before the transformation has made.
I'm trying to connect to a mysql database and I get this warning : "There was a problem accessing the connection's schema information. Item AREA is already in this named collection."
View 1 Replies View RelatedI've run into a problem with my "Jet.oledb.4" connection string not working for x64 machines. I've done some research and found out a few things, but am still confounded.
The code was written on a x86 XP machine with vb.net 2010 express. AutoCAD will load the dll just fine on x64 machines. Everything will work except the connection to the database. I tried installing the Microsoft Access Database Engine 2010 Redistributable for x64, but couldn't because the MS Office installed is x86!! Instead I installed the x86 version, but got the same unhandled exception at runtime.
Do I need to have the current x86 MS Office uninstalled and then install the x64 version of MS Office on those machines? Is it that the code is compiled as x86? If so, how can I compile to x64? I didn't see any options in settings, and haven't been able to find any examples.
The thing I really don't understand is that the same connection string ( "Jet.oledb.4") works in an old VBA routine on all machines!!
We are experiencing an infuriating and time wasting problem with SDE connected data.Users are properly set up (all 64 bit .dlls installed into the proper folders) and are using Autocad Map 2012 or Civil 3d 2012 (64 bit).
This problem does not happen every time but all too often. It is erratic and unpredictable in how it occurs between users.
When a given user makes a .dwg with connected data mixed with Autocad entities (or not for that matter) they can connect and work on a drawing normally. Once the .dwg is saved, another user will attempt to open the file. A couple of things will occur. One a 'fatal error' may happen and Autocad will have to be restarted. The other, and more common, is that the Autocad entities will begin to show and then when it appears to try to make a connection to the SDE Autocad will hang (the 'spinning circle of death' appears. Again this does not happen every time but very often.
The workaround to to recover the .dwg file, which deletes all connections and connected data, and then re-build the connected data. however, once that .dwg is shared again the entire problem may well happen again.
I have a Sql Server 2008 R2 database with gis features. I can connect to it and add the features to a map when using Map 2012, but not with Map 2013, even with the Sql Server hotfix installed. In 2013 I can log in to sql server and see a grayed out list of the feature classes, but I can't add them to my maps, and I get a message about no spatial data found, (or something to that effect).
View 9 Replies View RelatedI have multiple computers in my department that just received multiple Microsoft updates, a service pack update to Windows 7 and an upgrade to Internet Explorer 9. When they restarted and browsed in Windows explorer, all the Autodesk icons have been replaced by a generic icon. We tried to reset by re-establshing the file association and that did not work.
How do we rebuild the Autodesk icon cache on these machines?
I have noticed that a file is xrefed much faster if the file has been opened at some point. (Wtih the file I tested with it was 45 sec vs 1,5 sec) This must mean that the file is cached and can very quickly opened later if it has been opened.
I have an application that xref other files as overlay xref's. This is very slow since the xrefed files haven't been opened. And it will be this slow every time i xref them since they are never opened. Is there a way I can cache the files manually or something like that?
Is it possible to take Current User Coordinate System of external Database object, like
Application.DocumentManager.MdiActiveDocument.Editor.CurrentUserCoordinateSystem?
I've copied Standard CC libraries to read/write libraries and modified the tables. Mostly fasteners. I've prefixed the family name and family description with our company name. When I "place from content center", it's easy to see our content because the families are prefixed with our company name. However, when I use bolted connection, some of the families do not show our family name as a prefix like "place from content center" does. People constantly pick the wrong fasteners. They select fasteners without our Item number, etc. Then, they need to delete the fastener and try again. I can't seem to get bolted connection to show some fasteners with the company name prefix like Place from CC does. However, some families do show it.
Inventor 2012 SP2
Windows 7 64-bit
Is it possible to break my bolted connection, so that i can change the information given by inventor in the BOM? Its always grayed out and i can`t seems to find a way to make it "ungrayed".
I could change it directly on the .idw but me and my project leader would like to not go on that road. Our teams are seperated in to two. Ones in charge of modeling & the other is in charge of the presentation. We would like to give, as much as possible, not to much leeway on those in charge of the presentation.
I'm trying to create a assembly with .NET to draw all objects from a chosen spec. I started from Plant3D SDK which have a sample project. Autodesk ADN support is too slow to answer some basic questions since they have changed support platform recently.
After hours searching and trying to reach the main goal, I understood how connections between objects are done. The connector is based on End Type of objects. I'm not a meterial guy, so everything is much more difficult to me At CreatePipeline (..Plant SDK 2013SamplesPipingCreatePipeline) sample we have a class PipelineConnector which create connector. The main problem is only Buttweld connector code is available at CreatePart method in this class. I'm needing a piece of code where creation for others connector types such as Socketweld are shown.
the CreatePart code below:
public override void CreatePart() { Database db = AcadApp.DocumentManager.MdiActiveDocument.Database; ContentManager cm = ContentManager.GetContentManager(); part.Position = InsertPoint; part.SlopeTolerance = 0.1; part.OffsetTolerance = 0.0; if (ConnTypeName.Equals("Gasket")) { // Gasket // //PartName = "Gasket"; var spGPart = GetSpecPart("Gasket"); PSPColl.Add(spGPart); var blockSubPart = new BlockSubPart(); ObjectId Id = ObjectId.Null; try { if (spGPart.PropValue("ContentGeometryParamDefinition") != null) Id = cm.GetSymbol(spGPart, db); blockSubPart.SymbolId = Id; } catch { } part.AddSubPart(blockSubPart); // BoltSet // var spBPart = GetSpecPart("BoltSet"); BoltSetSubPart boltsetSubPart = new BoltSetSubPart(); boltsetSubPart.PartSizeProperties.NominalDiameter = NomDia;
[code]....
I try to work with the 3D space navigator, but somehow I do something wrong (I guess) When I try to zoom it works fine until I'm really close at the drawing and then suddenly it zooms very fast and I loose the drawing from the screen. I then have to give the command Zoom all to find my drawing again.
Furthermore on a regular base Autocad shuts down when I "play"with de 3D connection. Can it be that this is an Cad problem or a space navigator problem?
I have a simple bolted connection (bolt, nut and washer) and have tried to pattern this to make a toal of 4 bolted connections in a linear pattern. The preview looks fine however when I hit apply the patterned components disappear. I'm not sure why this is, I am using Inventor 2013 64-Bit SP 1.1
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I installed a bolted connection into my assembly and realized I chose the wrong length. I simply want to delete the connection and start over but there is no option to delete.Ctrl-Z will not let me back out of the connection either.
View 2 Replies View Related