I am having a problem to connection to data, the new file connection is properly connecting to data , if I going to add new data , I am getting this error as shown below.
Failed to cache features.
Failed to execute Fdo command.
ORA-03135: connection lost contact Process ID: 11779 Session ID: 4 Serial number: 6917
I am new at doing a ODBC connection and when I try to connect a database through our central system, this is the error message I got.Failed to cache features.
Failed to execute Fdo command. (2 consecutive occurrences)Table does not exist for class 'dbo:View_DH_UTM_COORDS (2)' (2 consecutive occurrences)
Map 3d 2011.User A connects to SDE using FDO and creates a dwg containing Mastermap data and other shape files held in SDE.User A saves Map 3D dwg on network drive that all users can access where all acad dwgs, docs etc. for that project are stored.
User B who is working on the same project at another PC tries to open the Map 3D dwg created by user A from the shared network drive but gets a "Failed to open FDO connection" error and cannot open the dwg.
Is this because Map 3D caches all data from SDE on the local drive of the PC on which the dwg was created?Is there a way around this to allow both users to access the same drawings?
I am also having the "could not write to internet cache" message in Autocad 2013. I have removed and replaced the AcInetEngine19.dll and AcInet Engineps19.dll files with the files in Byron Norales has supplied in these discussion gropups, However I still get the same "could not write to internet cache message" when opening files?
I have multiple computers in my department that just received multiple Microsoft updates, a service pack update to Windows 7 and an upgrade to Internet Explorer 9. When they restarted and browsed in Windows explorer, all the Autodesk icons have been replaced by a generic icon. We tried to reset by re-establshing the file association and that did not work.
How do we rebuild the Autodesk icon cache on these machines?
I have noticed that a file is xrefed much faster if the file has been opened at some point. (Wtih the file I tested with it was 45 sec vs 1,5 sec) This must mean that the file is cached and can very quickly opened later if it has been opened.
I have an application that xref other files as overlay xref's. This is very slow since the xrefed files haven't been opened. And it will be this slow every time i xref them since they are never opened. Is there a way I can cache the files manually or something like that?
We are a small business that uses AutoCAD. We are currently running 2012. We are on subscription. We only draw in 2D because most of our machines are very simple. The question is; what are the new features for 2D? It seems like the only thing Autodesk is interested in is 3D. I don't know if I want to upgrade further.
I need a solution how to convert SDF line features to DWG, where only one feature converted to DWG and DWG is named after feature ID. So if i have SDF file where are 3 featured( ID's are 1,2,3) and i want to convert those features to three different DWG files(one feature per DWG):1.dwg, 2.dwg etc.
I want to move AutoCad LT 2012 to a new PC.When starting the License Transfer Utility I can login but when clicking export I get.
The maximum number of exports for this serial number has been reached. You may not export more licenses than you have purchased.Click the "Try Again" link to resubmit the request.
When I create a new feature for a feature class in Map, it pops up the Data Table so I can enter my information. The table is a SQL table connected via FDO. There is an ID field set as the primary key. Map wants me to manually enter in the ID. How do you auto generate this field?
I'm going through some of the new features/ribbons such as "Design feed" and "Set Location" but when I click on these ribbons, the windows come up blank.
I am signed into my 360 account and the file I'm in is saved to my 360 account as well. why these windows are coming up blank?
I am trying to detect overlaps between two different features. They are, at the core, shape files from a GIS system and we have AutoCAD Civil 3D 2009.
I have reviewed the steps to test for Topo within a feature but don't know how to test topo between two features. I need to test for and identify "Overlaps" between feature A and Feature B and when Feature A is "Not Entirely Within" Feature B.
I have a drawing that has a connection to OS background map data which is an SDF file.
I want to create new entities in their own new autocad layer based on an offset value from a line in the SDF data.
For example I want to create a new line in a new layer that is say 1.0m offset from a kerb line that appears in the SDF file called OSMMLINE.
I do not want to add these new entities to the SDF data.
When I try to use the offset command Map starts to "populate feature Cache" which takes several minutes, then I can use the offset command in the usual way and create a new line - which "properties" says is in a feature class layer called OSMMLINE(1).
I have a situation where when I install Civl 3D 2013, which includes MS Visual Basic PowerPacks 10.0, it causes our KIP Request software to fail (KIP is our large format printer). Thru extensive testing we have narrowed it down to a conflict between KIP Request and the MS Visual Basic PowerPacks 10.0.I have tried uninstalling the MS VB PowerPacks10.0, which resolves my KIP request problem, and still seems to allow Civil 3D 2013 to run.
My question is - I'm sure the MS VB PowerPacks 10.0 is needed for some part of the Civil 3D 2013 software, but what features in C3D I am impacting by uninstalling MS VB PowerPacks 10.0?
So far this is the only resolution to fix the KIP Request software - but I'm afraid by fixing the KIP Request software I'm somehow messing up the Civil 3D software.
I'm plotting a drawing in which I have land parcels provided in the form of a connected ArcGIS shp file. The parcels are closed polygon features. I'd like to plot the parcels as phantom linetype. The problem is where neighboring parcels have common boundaries, Autocad Map does not filter out the overlapping boundary segments for the purpose of plotting.
As a result, the linetype becomes a mixture of phantom and solid lines and everything in between. I've tryed using plotstyles as well as styling the polygons. I don't think plot styles work with map features. The styling works when the lines do not overlap. Exploding the polygons and removing duplicate segments is not a realistic solution when working with data that is shared by true GIS programs like ArcGIS. I've seen some old postings that indicate this has been a problem for years.
When I use quick select, I can see that there are map features listed in my drawings. When I try to select these features it either says they have been selected but they aren't actually selected, or the autocad will crash forcing me to start over. How can I removed these features (which do not actually appear in the drawing) from the drawing. So many of my files seem to have this problem.
When I try to check-in a feature to table that is stored on SQL Server I get this message: "'FdoSpatialGridTransform::CalculateParameters': The resolution is too large (> 0.1) for the extents."
I want to use the different features in Map 3d such as the points, lines and polygon. I went to the help file and it instructed me to go to the display manager and right click on the "feature" layer to create a layer for the relevant feature that i want to use, but i have no "feature" layer in the display manager.
How do i create this layer? I use a template that is setup for c3d, is it due to this that there is no standard layer in the template?
When opening a third party drawing, is it possible to use the API to "recognize" user-created 3D features in AutoCAD? For example: grooves, holes, notches, and such? Also, if there are any attributes attached to the original 2D sketch, can those be queried as well?
URL....Until Kate fixes the link to Lynn's page, here it is: URL....I suspect LT will not get Point Clouds or 3D features (PressPull, Surface Curve Extraction, Model anything), but you got to love the Strike-Through Text ability. New DWG format? Kate will reveal all soon enough.
Interestingly, AutoCAD2013 details are out in Japan (if you are bilingual) URL....
Whe plotting drawing with a raster image in Autocad Map 3D, a dialog box pops up and reads "Failed to apply styles" and Failed to get band data". I have adjusted the RASTERPERCENT and the RASTERTHRESHOLD and the issue is still not resolved.
Had the message "Failed to get CommCntrController"? I have suddenly started to have this pop up every time I open a drawing. The only change I have made lately is downloading Inventor Fusion
To which a couple of you replied, I changed the relevant values in the registry and everything worked. Now however it has popped back up again (I have no idea why) and doesn't seem to want to go away. The registry path suggested is not quite the same on my machine, perhaps because it's networked, I really don't know but I am able to find what I think is the right reg and change the value.
sometimes in a heavy scene - it seems to depend on the topology/object count, more than on the actual poly count, when you start moving the viewport/camera there is a short lag in the first second. I assume that has something to do with the directx caching. If you know what i am talking about - here is the workaround: freeze everything you dont need right now (and set "frozen grey" to off). for some reason the lag is no more.
When you use the "orbit" button this is not happening - i guess the time you need moving the mouse from the button to the circle does the trick.
A personal comment at the end: i use 3d studio since the release 4 for ms-dos - so i saw it evolving in the past 15 years and used it nearly everyday. since max 8-9 things went worse with every new release .
when in simulation, if you suppress a feature is it totally taken out of the simulations workings?
I.e. if I was working on a project like some weighing scales and I had a load of objects on the scales and I then suppressed some of the objects, will the scales rise up a little to counteract the reduced weight?