When I create a new feature for a feature class in Map, it pops up the Data Table so I can enter my information. The table is a SQL table connected via FDO. There is an ID field set as the primary key. Map wants me to manually enter in the ID. How do you auto generate this field?
View 1 RepliesI am wanting to set up my cad so that when I save a file, a *.pdf file (with the same name as the saved *.dwg file) is automatically generated and dropped in a specific folder. I think that the auto publish should do this for me, but have been unable to get it to generate anything. When I hit save it is prompting me to do the publish, then after I say yes, it shows a brief status bar as if it is working, but when I try to go to the folder to which the publish option is mapped it is still empty.
View 9 Replies View RelatedIs there any auto generate command to retrive the part drawing from assembly drawing rather than open part one by one to retrive the drawing?
View 9 Replies View RelatedI am working for a company right now and we design cases. The design process involves creating a rectangle of length and width, extruding it to height and than building a case around it. the sides are 20mm offset from the item itself and the top and bottom are 27mm offset from the item itself.
Is there any way I can avoid having to repeat what im doing over and over every time i create a case. We also have standard latches and handles. The top is also standard being 60mm panel height. There is also standard for spacing between the top panels and bottom panels to allow for tongue and groove.
I recently started working with Inventor (Solidworks user for 15 years). When designing new parts in an assembly in Solidworks, there was always an auto snap feature to align parts (centerline, midpoint, etc). I cant seem to find this option in Inventor 2013. Im trying to design new parts in an assembly but cant seem to snap to any other existing parts features or centerlines. Is there a quick way to activate this option? Is it even available in Inventor?
View 2 Replies View RelatedWe are using iPart - iAssembly workflow with Inv-2013 and Vault Basic 2013
My question is related to released state of iparts. Currently we are generating/ releasing
all the iparts when new member is added in order to manintain the parent child version relationship
Example : say i have a ipart 41020.ipt and i have members 41020- 001 ~ 008 . I check out the parent
from Vault and add 009 member to it.
Question :
Do I have to generate all and check those in to maintain the version relationship between the child and parent inside
Vault 2013 ?
Or
Only generating 009 will maintain version relationship inside Vault 2013
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
Is there any way to set features to be invisible when create sketch after those 3D features so as to make the sketch more easy to see?
View 3 Replies View RelatedI have photoshop cs4 and I cannot find the Auto smart fix, auto levels, and auto contrast nor the adjustment for each that I had with photoshop elements.
View 10 Replies View RelatedI was using these tool on a lot of images, because they often seemed to vastly improve them, making the colors pop on otherwise somewhat dull ones, and getting rid of unwanted color casts..
Later though I noticed that it is often at the cost of burning out hightlights in some areas beyond salvation.I also find shadow /highlight sometimes does this also.
Then I tried to protect some small areas with a mask before proceeding, but it seems that I can't find information on just painting a mask, but only videos with much more complex adjustment such as the Russel Crow or Lynda ones with maintaing hair detail while superimposing images, which is way beyond what I need in these cases.
If I try the wand to select and inverse I get unnatural looking divisions. Is it a matter of feathering to the right extent?
Yes, I'm probably the only person on the planet that wants this, but I liked how the Auto Tone auto adjusted the Exposure slider (ONLY!) and left all the other sliders at zero in the Lightroom 4 beta.
Is there a way to write a preset that returns that behavior?
I have just moved from 7.0 to CS3 (and PC to Mac) and am currently trying to get to grips with the new features! Once which I love is the auto-align and auto-blend feature(s). My question is, is there any way to control how these features work? I have seen on some web sites people talk about 'fuzziness' sliders where you can control that if an object (pixels) appear in X% of the photos they should/shouldn't be included in the final image but I cannot find these.
My intention is to use these features to take photos of monuments and have the people who are moving about removed from the final image (I guess it's the auto-align that would do this.) I tried a test and took a number of photos at home but I kept moving one object around (a pen.) The pen appears in all the images but in a different location so it always appears in the final image. When I tried auto-align with a stack that included one image without the pen, the pen was removed from the final image. Given the first scenario (i.e. the object is in all the images but in a different location) is there any way of automatically removing it using auto-align or would this have to be a manual process? In the real world, it would be possible to take a photo of a monument with people in different locations but it would be much harder (or take a long time) to take one where at least one person was not in all the photos (there's always someone loitering.)
is it possible to do something like this but to create an shrinkwrap of an IAM and save it as IPT?
View 3 Replies View RelatedIs there a simpler way of creating Isolines (more like transition geometry) between a couple of flat 2D profiles?
Isolines.PNG
Currently I am using the LOFT command for the purpose. But it doesn't automatically produce the desired Isolines as both the "parent profiles" are in the same plane. For that, I have to manually elevate one "parent profile" then change the Isoline UV number, then do some export/import WMF thingy to remove the unwanted edge profile...
Would like to generate a pdf of an acad drawing and have the attributes in the pdf clickable/readable. Am I making any sense?
View 8 Replies View RelatedWhich software application can I use to create a rendering of an elevation from just 2 dimensional dwg plans and elevations? I was interning in an office where the developer hired a render to develop illustrations of our design. The render said he only required our first floor and second floor plans, and the elevation we wanted rendered. The turn around time was very quick (24 hours). I was surprised as building a model takes me a long time. The cornice was very detailed, it would have taken much longer to build a model.
View 2 Replies View RelatedI was wondering if there is a way that AutoCAD can automatically generate a polyline (or something similar) that would illustrate the desired direction for a route from linked database information. My taxation/assessment/water department would like a map showing the routes a water meter reader should take according to linked data on parcel rollnumbers. They want an arrow on a line showing a route that should be follwed for each zone/metered area.
View 5 Replies View Relatedi need to generate a 3D model of an aircraft from point clouds in CAD but i dont know how to start with autocad.
View 1 Replies View RelatedI drew a 3d spiral, and now i need to create a cut-sheet in sections (half or quarter) so I can sent to my shop for fabrication. Please see attached photos.
I want to be able to provide a cut sheet template so i can print it out and they can trace it on the sheet metal, cut however many sections required, and weld it together to create the spiral. My concern is that the top view dimensions is not an accurate dimension when the piece is bent 8 inches from the start of the spiral.
Also, my next issue would be the side wall of the spiral, and how to properly create a cut sheet on the given dimensions.
I also tried to do this in Autodesk Inventor, using the sheet metal tool, flatten command, and I was unable to flaten the object.
how to generate the 2D drawing from the 3D model with AutoCAD 2010. I ever used SolidWorks which offers this capability.
View 9 Replies View RelatedIs possible to automatically generate dimensions based on its parameters when creating a view in a particular model ?
View 3 Replies View RelatedIt's routine generate hatch files. (pat extension). You can use them in Autocad or import in Revit.
Two commands:
DHA - tile paterns.
DHL - construction paterns.
I Hope it's work.
I decided to try at making myself a 3d D20 in AutoCAD 2013 and have run into MANY problems. I have slowly chipped away at them, but I still have one issue, I am having issues turning my 20 regions (faces) into one solid.
Picture below showing the 'shell' made out of regions on the right.
We are implementing a new ERP system and we've programmed the configurator in it to build a price for us. We'd like to create a simple 2D drawing for us in AutoCAD based on some of the data from the configurator automatically. Is it possible using AutoCAD LT 2013 or do you need the full version to build something like this? Also, does this sound like it would require a lot of programming in CAD?
View 8 Replies View RelatedI have generated a TIN surface and change the style to "Slope". I want to create a legend for the surface, but the legend has no content, only the header.
View 6 Replies View RelatedIt is possible to generate the model of only one sprocket, without drawing the whole transmission?If possible, how to generate this model.
View 3 Replies View RelatedAny archiving or library tool that would develop a preview contact sheet - JPG, PDF, etc.. of a folder of say 700-1000 basic DWG drawings of manufacturing assemblies (not complex building layouts or anything).
We've got a ton of old drawings that we need to sift through and I don't want to open each one.
I'm thinking there's some 3rd party something.
My boss said i could generate an isometric view of a drawing if i have the plan, elevation, and side views (makes sense enough). how do i go about doing this? is there an existing thread i can be forwarded to? (searching "isometric" didn't seem specifically useful.)
View 9 Replies View RelatedI have a finished 3D model in AutoCAD (although I did import it from another program), and I want to create the standard orthographic views as easily as possible. This tutorial looked perfect [URL].........
but i ran into some trouble. At step 5, where it says to press Base or use the command VIEWBASE i get a window that will ask me to open up some kind of inventor file. The tutorial does not acknowledge this, but the rest of the instructions and result seem like just what I need!
I have an assembly with around 120 variants in it. I am getting a little annoyed having to click the OK button when asked:
"Do you want to save changes to 122.iam" and its dependents"
is there any way to set the default to OK?
(other than setting an electric motor and a poking device up)
The question is 'how to generate ribs out of surface, to machine from wood and assemble the skeleton for doing fiberglass'). URL....Someone generated those wooden ribs, machined it and assembled the shape to fill inside with stereofoam (say), and cover by fiberglass to generate mold.
I failed to find any kind of tutorial that answers "how generate such ribs out of a surface at hand".
We are a small business that uses AutoCAD. We are currently running 2012. We are on subscription. We only draw in 2D because most of our machines are very simple. The question is; what are the new features for 2D? It seems like the only thing Autodesk is interested in is 3D. I don't know if I want to upgrade further.
View 9 Replies View Related