When I try to check-in a feature to table that is stored on SQL Server I get this message: "'FdoSpatialGridTransform::CalculateParameters': The resolution is too large (> 0.1) for the extents."
View 4 Repliesi am trying to do a print out of our lots within our proposed plat & need to do indivial closure reports for each lot. when i try an run a report i get Error - Invalid execute file.ive added new .dll files that I got off the net but they do not work either. which are located at C3D 2011/enu/Data/Reports/Net.
View 2 Replies View RelatedI am getting the attached error when trying to check in an assembly and idw. The Vault is pointed to the C drive, so I'm not sure why it isn't finding the files within the C.
View 3 Replies View RelatedI'm using Inventor 2014.
I created a Punch Tool iFeature, everything seemed fine, I could save it without problems.
However, when I try to place it in a part with the Punch Tool, it says "The file has 0 volume changing features. To be a valid punch tool, the .ide file must contain at least 1 sketch-based feature."
I get this error when I actually run the spell checker. How to set the dialect? It seems to run, it just gives the error every 2-3 words.
View 2 Replies View RelatedIs there any way to set features to be invisible when create sketch after those 3D features so as to make the sketch more easy to see?
View 3 Replies View RelatedI have some ps files on an external firewire disk; I can open them if I open PS7 first, but if PS is not open and I double click on them I get a quick message at the top of the screen saying "Check Plugin" and PS7 doesn't open.
when I checked the file list on the external disc I found the files were labelled "CheckPlugin document" -
(OS 9.2.2 on main internal HD)
So i have 3 file DWG :
3.dwg : is a plan 'archi'
2.dwg is a plan with only décoration.
1. dwg is a plan with only the water.
i have this structure in my file (1.dwg) :
1.dwg
---> 2..dwg
---------> 3.dwg (this file is a Xref of 2.dwg)
--> is the blockRefecence (XRef).
Dim CollXref As New ObjectIdCollection Dim mydb As Database = Application.DocumentManager.MdiActiveDocument.Database Dim myTrans As Transaction = mydb.TransactionManager.StartTransaction ' Dim doc As Document = Application.DocumentManager.MdiActiveDocument
[Code] ......
So i don't want to add Id of a Xref From a Xref. (In my example i want only ObjectId of the 2.dwg not 3.dwg if i launch this code on 1.dwg.
We are a small business that uses AutoCAD. We are currently running 2012. We are on subscription. We only draw in 2D because most of our machines are very simple. The question is; what are the new features for 2D? It seems like the only thing Autodesk is interested in is 3D. I don't know if I want to upgrade further.
View 9 Replies View RelatedI need a solution how to convert SDF line features to DWG, where only one feature converted to DWG and DWG is named after feature ID. So if i have SDF file where are 3 featured( ID's are 1,2,3) and i want to convert those features to three different DWG files(one feature per DWG):1.dwg, 2.dwg etc.
View 3 Replies View RelatedI'm need to make a Map Check report on C3D2011, but I don't know how to do it. Since C3D everything have to be setup before it can be use, so my questions are: How do I setup map check? Or What do I need to do get map check report?
What are the steps to do it right?
I need to export data to an excel file but I need to check if the file is already open.
Searching the internet I found this but I don't know what "imports" to use to use to enable it.
Public Function FileInUse(ByVal sFile As String) As Boolean If System.IO.File.Exists(sFile) Then Try Dim F As Short = FreeFile() FileOpen(F, sFile, OpenMode.Binary, OpenAccess.ReadWrite, OpenShare.LockReadWrite) FileClose(F) Catch Return True End Try End If End Function
If any easy method to check the model in the inventor.now i doing each feature i have to check the fully constrained or not.if any easy method.
View 8 Replies View RelatedIm thinking of adding some kind of info that tells me if the active ipt or iam have an idw, by the same name. It should be available/visible when opening, or editing parts and assys.
View 3 Replies View RelatedI have a lack of expierence in using visibility checks. I created road profile , now i would like to check the visibility of it. Cuz my profile have hills , and the car driver must see other objects in the road . His sight in front should be 400 meters , eyes height 1 meter and the target in 400 distance should be seen by 1 meter tall.
View 1 Replies View RelatedI am working on a batch print application. I check the page info in current layout. I like to know if it's landscape or portrait? How I can do it in the code?
View 1 Replies View Relatedhow to check the radius of a polyline arc?
View 6 Replies View RelatedI want to be able to see if any documents were printed from my computer last friday, but I'm not sure how to.
View 9 Replies View RelatedI have some model boat plans (scanned images) and would like to convert them to 3D objects. I used a software img2cad for the conversion, and since the conversion is not perfect i have to redraw all the parts. So here are my questions:
1. For the parts i mostly used lines, splines and arc. What is the best way to join them, so later i can edit them to 3d solid object? I used join and it works well, however it creates a small angled edge at the end. (see image or zoom in dwg file).
2. For some of the parts the extrude command works only on the edges of the 2D object creating a hollow 3D object. How do i fill the inside?
3. In near future i would need to assemble all the parts and make the skeleton of the boat. Is there a way to check for object collision (if parts are too big for example to fit where they should)?
I also attached a file with two ribs of the boat as an example.
When I create a new feature for a feature class in Map, it pops up the Data Table so I can enter my information. The table is a SQL table connected via FDO. There is an ID field set as the primary key. Map wants me to manually enter in the ID. How do you auto generate this field?
View 1 Replies View RelatedI am having a problem to connection to data, the new file connection is properly connecting to data , if I going to add new data , I am getting this error as shown below.
Failed to cache features.
Failed to execute Fdo command.
ORA-03135: connection lost contact Process ID: 11779 Session ID: 4 Serial number: 6917
I'm going through some of the new features/ribbons such as "Design feed" and "Set Location" but when I click on these ribbons, the windows come up blank.
I am signed into my 360 account and the file I'm in is saved to my 360 account as well. why these windows are coming up blank?
Is there any limitation for viewport rotation with connected features?I have number of connected shapefiles that I can see in model view.
However, my paperspace viewport rotated for 70 degree can't show them.
I am trying to detect overlaps between two different features. They are, at the core, shape files from a GIS system and we have AutoCAD Civil 3D 2009.
I have reviewed the steps to test for Topo within a feature but don't know how to test topo between two features. I need to test for and identify "Overlaps" between feature A and Feature B and when Feature A is "Not Entirely Within" Feature B.
I have a drawing that has a connection to OS background map data which is an SDF file.
I want to create new entities in their own new autocad layer based on an offset value from a line in the SDF data.
For example I want to create a new line in a new layer that is say 1.0m offset from a kerb line that appears in the SDF file called OSMMLINE.
I do not want to add these new entities to the SDF data.
When I try to use the offset command Map starts to "populate feature Cache" which takes several minutes, then I can use the offset command in the usual way and create a new line - which "properties" says is in a feature class layer called OSMMLINE(1).
AutoCAD Map 3D 2011 64bit / Win 7
I have a situation where when I install Civl 3D 2013, which includes MS Visual Basic PowerPacks 10.0, it causes our KIP Request software to fail (KIP is our large format printer). Thru extensive testing we have narrowed it down to a conflict between KIP Request and the MS Visual Basic PowerPacks 10.0.I have tried uninstalling the MS VB PowerPacks10.0, which resolves my KIP request problem, and still seems to allow Civil 3D 2013 to run.
My question is - I'm sure the MS VB PowerPacks 10.0 is needed for some part of the Civil 3D 2013 software, but what features in C3D I am impacting by uninstalling MS VB PowerPacks 10.0?
So far this is the only resolution to fix the KIP Request software - but I'm afraid by fixing the KIP Request software I'm somehow messing up the Civil 3D software.
I'm plotting a drawing in which I have land parcels provided in the form of a connected ArcGIS shp file. The parcels are closed polygon features. I'd like to plot the parcels as phantom linetype. The problem is where neighboring parcels have common boundaries, Autocad Map does not filter out the overlapping boundary segments for the purpose of plotting.
As a result, the linetype becomes a mixture of phantom and solid lines and everything in between. I've tryed using plotstyles as well as styling the polygons. I don't think plot styles work with map features. The styling works when the lines do not overlap. Exploding the polygons and removing duplicate segments is not a realistic solution when working with data that is shared by true GIS programs like ArcGIS. I've seen some old postings that indicate this has been a problem for years.
When I use quick select, I can see that there are map features listed in my drawings. When I try to select these features it either says they have been selected but they aren't actually selected, or the autocad will crash forcing me to start over. How can I removed these features (which do not actually appear in the drawing) from the drawing. So many of my files seem to have this problem.
View 6 Replies View RelatedI want to use the different features in Map 3d such as the points, lines and polygon. I went to the help file and it instructed me to go to the display manager and right click on the "feature" layer to create a layer for the relevant feature that i want to use, but i have no "feature" layer in the display manager.
How do i create this layer? I use a template that is setup for c3d, is it due to this that there is no standard layer in the template?
I want different features on and off with iLogic.
I have a text parameter with a choice menu of 1,2, and 3
This I want some features on and off.
If I pass the parameter I get a message: No feature found with the name. Mvg Jos
Your drawings are only as good as the symbols that complete them...
When opening a third party drawing, is it possible to use the API to "recognize" user-created 3D features in AutoCAD? For example: grooves, holes, notches, and such? Also, if there are any attributes attached to the original 2D sketch, can those be queried as well?
View 1 Replies View Related