AutoCAD Inventor :: Vault 2013 Check In Error
Oct 8, 2013I am getting the attached error when trying to check in an assembly and idw. The Vault is pointed to the C drive, so I'm not sure why it isn't finding the files within the C.
View 3 Replies
ADVERTISEMENT
AutoCAD Inventor :: 2014 - DWG Will Not Check Into Vault
May 29, 2013I am having issues getting my .dwg files to check back in to Vault Basic. I can get all different types of files (.iam .ipt .idw) to check in without issues, but .dwg files hang and Inventor will eventually lock up.
I've tried disabling Visualization and I still cannot make it past this point. I can even tell it to check in everything at once, and it will breeze through the other files but any .dwgs will hang.
My PC Config:
Windows 7 Professional 64-bit
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
16 GB RAM
Dual AMD Radeon HD 6450
Running Product Design Suite 2014
AutoCAD Inventor :: Files Won't Check-in To Vault
Jan 3, 2012We are currently using Inventor 2010 Professional Suite. Most of the users here are working with AutoCAD Mechanical. For the most part, it does the job. The person that previously used Inventor has moved on to bigger and better opportunities. Recently a new person was hired to utilize the Inventor software for initial designs. The original software was loaded on a new machine and everything seemed to work fine. Inventor was able to checkout files from the vault and were able to be manipulated accordingly. The issues began when the individual started to check the files back into the vault. It would appear everything works fine but the files never appear in the vault. Even if we create a new directory and attempt to check them in, the new directory is created in the vault but the files will not check-in.
If we use AutoCAD Mechanical, the files will check-out and check-in fine using the addin tools. It would appear all the rights are setup correctly. We even changed the new user to administrator and it still did not work. No one else has Inventor installed, but I am about to install it on another machine this Thursday when IT is in.
We have attempted to even drag the files into the vault just to see if that would work, even though we know this method is usually not the best. Still no success.
Running WINDOWS OS 7 PROF.
INTEL (R) CORE (TM)2 QUAD CPU Q9550 2.83 GHZ
8.00 GB RAM
Hard drive WDC WD10EARS-00MVWBO ATA DEVICE, 872 GB FREE OF 931 GB
AutoCAD Inventor :: Vault Add-In Not Allowing Open (Check Out All)
Oct 24, 2012Following a recent Inventor crash (another topic entirely), I re-started Inventor and logged in to Vault Workgroups, all with no problems. From the Ribbon Vault Tab I chose Open, browsed to and selected one of my I-Assemblies. I clicked the down arrow next to the Open button at the bottom right corner of the dialog box, and was surprised that the Open (Check Out All) option was grayed out. This has never been the case before now. I have checked with quite a few other Assembliles and I-Parts, all of which are currently in sync with the Vault, and none of them allow me the option of Open (Check Out All).
This has persisted for 2 days now, meaning I have shut my workstation down completely and re-started each morning. Is there some system setting or variable that needs adjustment? Is there some disconnect between the Inventor Vault add-in and Vault Workgroups itself that results in this option being disabled?
Autodesk Product Design Suite Premium 2013
Inventor 2013 64-bit Edition
Win7-64, 8-core Intel® Xeon® CPU W3550 @ 3.07GHz
NVIDIA GeForce GTX 560 Ti
454 GB HD, Intel® ICH10R SATA AHCI Controller
SpaceNavigator, 3.14.2 / 6.14.0 / 3.18
AutoCAD Inventor :: ILogic - Check-in Drawing Into Vault
Jan 8, 2014I'm wondering if it is possible to check-in drawing into vault using i-logic?
If you check-in a drawing into our vault, it automaticly exports a .dwf to a storage server. We also have a simple button for making .pdf of the drawing to sent to the customer.
What i want to ensure is that the .dwf file and the .pdf file are the same. So when i press "make a .pdf" the rule will save my document, make a .pdf and (if possible) check it into vault. So from that point the .pdf for the client and the .dwf on the server are the same.
Inventor 2013
AutoCAD Inventor :: Vault Check Out Window Behind Add-in Dialog
Sep 2, 2011I have a Visual Basic.NET add-in that displays a dialog in Inventor. The code in this dialog opens some parts in the background. This has always worked fine, but now I'm working with Vault and when the files are not checked out Inventor displays a small window and asks the question if you want to check out the file. The problem is that this small windows stays behind my add-in dialog. Is it possible to show the check out windows on top of my add-in dialog? I tried form.show and form.showdialog, but this doesn't seem to make any difference.
View 2 Replies View RelatedAutoCAD Inventor :: Vault Check-In Breaks Preview
Oct 26, 2013I use something like the code shown below as part of an Inventor add-in that automatically checks in modified parts and drawings. Everything works perfectly except for one problem. After a file is checked in using this process, the Vault Preview is unavailable. The message in the Preview window says "Unable to view the file selected. Click the 'Open' button to view with an external viewer."
Dim byteArray() As Byte = IO.File.ReadAllBytes(fullFileName)Dim fileBom As Autodesk.Connectivity.WebServices.BOM = serviceManager.DocumentService.GetBOMByFileId(vaultFile.Id)serviceManager.DocumentService.CheckinFile(vaultFile.MasterId, Environment.UserName, False, IO.File.GetLastWriteTime(fullFileName), associations, fileBom, False, vaultFile.Name, vaultFile.FileClass, false, byteArray)
What needs to change so that the Vault Previews will be maintained? This is with Inventor/Vault 2012, but a solution using a more recent version would also be great.
AutoCAD Inventor :: Activate Vault Check In Box Hidden And Pass Predefined Options?
Aug 2, 2013Im working on a program that checks out syncronizes some data with our erp system and then checkes in the files again to vault. all works fine but in vault all links to other files are gone? when i checkin the files from inventor manuel then the links are ok in vault. therefore i wonder if it is possible to run the vault checkin dialog "hidden" and just pass in some predifined options and checkin to vault.
View 8 Replies View RelatedAutoCAD Inventor :: Get Error During Checkin In Vault
Nov 22, 2013During checkin of inventor 2011 idw files into Vault Basic 2011 we get some people get sometimes an error:
The people that get the error have enough rights on the destination network location where DWF's are saved to write, change or delete files. The only difference is that the OS is Win 7 Pro 64bit instead of Win XP 64 bit.
The old win xp 64 bit have not the above error. We are now upgrading from 2011 to 2013, but would like to solve the above issue / wrong setting.
The DWF's are generated during checkin by inventor.
Inventor settings:
In Vault the visualization settings are
AutoCAD Inventor :: Communication Error With Vault Addin
Sep 9, 2013Using Inventor 2014 and Vault Basic 2014. It was working this morning but now when Invnetor is opened it automatically logs into Vault and says it is successful but the open from vault icon is greyed out. Similarly when opening a drawing from the vault it used to automatically run and open inventor but now seems to lack the connection. Even when manually opening a drawing that is in the vault by downloading it from the browser and then opening in inventor there is no Vault tab on the browser and all Vault commands except "log out" are greyed out. I think it has something to do with the add-in as well as the Vault group.
View 2 Replies View RelatedAutoCAD Inventor :: Error Checking DWG Into Vault Basic 2014?
Jun 4, 2013Installed Product desgin suite 2014. I can create a new inventor dwg file and place a base view of an assembly into it. I then attempt to check it in and it causes Inventor to not respond and eventually crash. When I reopen the dwg from my working folder and attempt to check it in again it gives me an error saying that the file already exists.
View 1 Replies View RelatedAutoCAD Civil 3D :: Upgrading COGO Points - Drawings Take Eternity To Check Into Vault
Nov 2, 2009Today I happen to be checking in and out many drawings. All display the cogo points message at the lower left corner, and all are taking 4 minutes to check in. UNREASONABLE! Especially when I have five minutes of work to do in each drawing.
View 9 Replies View RelatedAutoCAD Inventor :: No Vault Tool Bar 2013
Oct 19, 2012I recently installed Vault pro 2013. I was running Inventor 2012 at the time.. My vault add-in stopped loading. I installed Inventor 2013 and the vault add-in still won't load. I've gone to the Add-in manager 2013 and set it to loaded. I hit the "OK" button and nothing. Open the manager up again and it says "unloaded". Something is going on that is not allowing my vault add-in to load.
View 1 Replies View RelatedAutoCAD Inventor :: Does Pro 2013 Works With Vault Pro 2012
Jul 26, 2012Does Inventor Pro 2013 works with Vault Pro 2012.
View 1 Replies View RelatedAutoCAD Inventor :: Windows 7 Update Corrupting Vault / 2013
Dec 13, 2013Computer: Dell Optiplex 790, Intel i5-2400 - 3.10 GHz, 8 GB RAM, NVidia Quadro 600 video card, Windows 7 - 64 Bit
Vault: Files are not displayed if opened in Detail view. Must go to the Incon view to display files. Then, switching back to Detail view, file (Vault) status is not shown. If click "Get/Check IN" on file, Vault will crash and shut down. More recently, an HTTP 404: Not Found error appears when clicking on files - may disappear after a wait or clicking on the file repeatedly.
Inventor: Cannot access any files through the Vault tab - Inventor crashes and shuts down. If file opened from Vault instead, it will open and can be saved, checked In/Out.
All of this started a couple of weeks ago shortly after installing Windows Updates. It occurs only on my machine. No other Vault/Inventor user is having any problems. Two IT techs spent a week trying to solve the problem. The only solution was to unistall and reinstall everything including Windows 7. It worked great for a week until another Windows update was installed - now back to the same problems.
AutoCAD Inventor :: Vault Icon Missing From 2013 Ribbon?
Apr 17, 2012Just installed inventor 2013 and the icon to launch vault is missing from the ribbon where it used to be in v 2012. Also when i try to open a file the quick link to vault is not there. i have installed vault basic 2013 and it opens up fine and my files are in it. Do i have to create a link?
View 2 Replies View RelatedAutoCAD Inventor :: 2013 Locks Up During Check In?
Sep 25, 2013I am running Inventor 2013 with vault 2013 on a brand new system. Everything was working great for a week or so, then inventor started to lock up during checkin. It would lock up with even a small simple part. I had the IT department try to remote in and change settings, with not luck. Then they "rebuilt" the system over again, this got things working for about another week and after that the problem started up again.
View 1 Replies View RelatedAutoCAD Inventor :: 2013 - Task Scheduler Won't Support Vault Project
Aug 1, 2012I have installed Inventor 2013 on a machine just so that I can use this machine to migrate my files using the Autodesk Task Scheduler. I started the TS, then Create Task>Migrate Files task. I selected my "Vault" project and get a message that says "Vault Projects not supported".
I noticed that in the Migrate Files dialog, there is not a box at the top that says "Migrate from Vault".
This is installed on "Windows Server Standard x64" OS.
I tried a repair install and Reinstall on the Inventor 2013 installation. Problem still persists.
AutoCAD Inventor :: 2013 Vault Addin Could Not Find Data Management Services
May 9, 2013I was getting this error on one of my users machines, inventor 2013 vault add in could not find the data management services
I uninstall Vault workgroup 2013, Inventor 2013, re install, and re install add ins, worked for half a day, and just got the same error again,
it seems As Inventor looses the add in, what was intersiting it gave an error about some unerlaying error after disgarding that, the add in doesnt work anymore.
I also cant copy design from vault on the same machine, all Inventor related files cant be copied, but dwg files can.
I get the feeling its an Inventor issue, my last resort is a clean install.
AutoCAD 2013 :: Freezes / Locks Up When Accessing Drawings In Vault 2013?
Dec 27, 2012I have a Windows 7 machine running AutoCAD 2013. When trying to open any drawings from our AutoDesk Vault 2013 server, AutoCAD will hard lock/freeze and can only be closed by using Windows Task Manager. When accessing the same files through the Vault first, without opening AutoCAD, they open with no issues.
View 1 Replies View RelatedAutoCAD Inventor :: Error Opening Assembly On 32bit 2013 That Was Created On 64Bit 2013
Oct 2, 2012I have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
AutoCAD Map 3D :: FDO Error To Check-in Features
Nov 22, 2008When I try to check-in a feature to table that is stored on SQL Server I get this message: "'FdoSpatialGridTransform::CalculateParameters': The resolution is too large (> 0.1) for the extents."
View 4 Replies View RelatedAutoCAD Civil 3D :: Parcel Map Check Report ERROR
Jun 21, 2012i am trying to do a print out of our lots within our proposed plat & need to do indivial closure reports for each lot. when i try an run a report i get Error - Invalid execute file.ive added new .dll files that I got off the net but they do not work either. which are located at C3D 2011/enu/Data/Reports/Net.
View 2 Replies View RelatedAutoCAD 2013 :: Multi Process When Opening From Vault
Jan 16, 2013one of our users is opening AutoCAD from Vault, accessing his files this way.but every file we open, the AutoCAD installed open up a new process, resulting in multi AutoCAD applications.so If I have 4 drawings open, I have 4 processes of vault open,
View 5 Replies View RelatedAutoCAD 2013 :: Vault To Install On Synology Server?
Nov 6, 2013How can I install 2014 vault basic on my synology NAS Server? I have been told by our IT Guys that it won't be able to handle the vault software. What makes the Synology Server not work with Vault?
View 1 Replies View RelatedAutoCAD 2013 :: Check Annotative Box In DIMSTYLE?
Jan 29, 2013Can a DIMSTYLE with annotative box checked be used in Layout or Paper Space? If so, are dimension at risk of losing their associative to part being dimension or be subject to change their Scale Factor when moving model or a different user (machine) opens the file?
View 2 Replies View RelatedAutoCAD 2013 :: Spell Check Not Working Correctly
Sep 18, 2012In AutoCAD 2011 and 2012 my spell check instantly recognizes a misspelled word as soon as you enter a space after the word as you type.
AutoCAD 2013 does not recognize the misspelling until I go back (still within the text editor) and click on the word. Only then will it show the red underline. This is using Dtext only. Mtext works fine.
For the bad spellers or missed keystrokes, the fast "on the fly" spell checking was great. How to get my AutoCAD 2013 to behave similarly?
AutoCAD 2013 :: Check With Which Version Drawing Is Saved?
Apr 3, 2013How can I check with which autocad version a drawing is saved?
View 8 Replies View RelatedAutoCAD Inventor :: Memory Error Despite 12G On 64-bit With FDS 2013
Feb 21, 2013I could open my autocad and inventor dwg files (No I can't post them) fine w/ 2011. Now we upgraded to FDS 2013 and I keep getting this error.
Close programs to prevent information loss:
Your computer is low on memory. Save your files and close these programs:
Autodesk Inventor 2013
AutoCAD Civil 3D :: 2013 - How To Check Elevations On Crossing Alignments
Jul 28, 2013I have recently started working with civil3d 2012 & 2013 so go easy one me...
How can i check the elevations of 2 alignments that cross (junction)?
The localization team in Israel has added a utility that marks the junction on the profile view with a red flag and 2 marker lines, one for the existing ground and one for the elevation of the crossing alignments. The flag is not a civil3d entity, it's not dynamic and needs to be reset after each change.
Any better way of checking the elevations? (including adding a block or anything to the profile to show the other alignment name and elevation).
AutoCAD 2013 :: When Type A Word That Spell Check Does Not Recognize
Apr 23, 2013The spell check works, almost. when I type a word that spell check does not recognize, I get the red underline, but when I choose to add it to dictionary, no dice. if I ignore, close the editor and reopen, the red underline is there.
What to do, what to do?