AutoCAD Map 3D :: WMS Connection In 2012?
Jun 25, 2012
I'm trying something I believe to be fairly basic: I'm trying to get some base mapping into my Map 3D drawing.
In particular, I need to get the World Street Map found here: [URL] ......
In Map, under Data Connections, I'm using "Add WMS Connection"
I give the connection a name, enter the Server name, and leave Version on "Default version"
I leave username and password blank.
But I always get the error message: "Failed to connect."
Do ESRI and AutoCAD just not play well together?
View 2 Replies
ADVERTISEMENT
Sep 12, 2011
Ive recently upgraded from AutoCAD map 2011 to 2012. But my connection to ArcSDE doesnt seems to work anymore.
My connection is the same as with 2011 using the pe.dll, sde.dll, sg.dll files.
Getting this message:
Unable to establish connection to provider.
FDO Provider entry point function 'CreateConnection' returned NULL.
View 7 Replies
View Related
Sep 10, 2012
When I use the DA to generate a bolted joint that utilizes flat head cap screws (English, 82 deg), the countersunk hole is not large enough and it leaves the heads sticking out slightly proud of the surface. Most of the time when I use FHCS fasteners, the heads must be below flush.
I went into the Clearance.xls file and increased the diameter values for the 82 degree holes. However, it doesn't appear that the DA actually pulls its hole data from this file. I saved the XLS file, closed it, closed IV, retarted IV, deleted the old DA assembly and started over. And I still got the same undersized hole.
However, I did verify that if I just place a HOLE on that point and set the hole as countersunk and clearance for that size of fastener, it will use the hole size that I specified in Clearance.xls.
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
View 9 Replies
View Related
Feb 17, 2012
Here is the Scenario, Win 7, 64 bit, Office 2010, and yes I have installed 64 bit drivers, with Map 2012.
I have an Access Database with Water and Sewer information. I connect thru FDO and every thing is great. I make a change or add something to the Access Data Base and I don't see the change until I disconnect and then re-connect? I was under the assumption that this was a live connection? Is there a way to refresh the connection without having to dis-connect and then re connect?
View 1 Replies
View Related
Mar 29, 2012
Is this supported by Autodesk, and will installing both products create any issues?
View 3 Replies
View Related
Jan 11, 2013
I connected a few .shp files in Map3D for references and now I want to removed these connections. All can be deleted expect one. Under the Verify Delete Connection table, I selected the Dependent Resources and click OK and nothing happen. It is still there. How can I get rid of it?
View 1 Replies
View Related
Dec 15, 2011
Suddenly, I'm no longer able to add shp files to my map. I can connect and select the schema that I want to add, but when I click on the add to map or add to map with query, the the check box next to the schema clears itself and nothing happens.
Win 7 Pro 64bit
C3D 2011 version 3 64bit
View 2 Replies
View Related
Mar 12, 2012
We have this public server in Indiana that I am trying to figure out if Map 3D will connect to. The directions on how to connect are here: [URL] ........
If Map 3D 2012 is able to connect to this data? I cannot get it to work, but I am not a Map / GIS expert by any means.
View 6 Replies
View Related
May 25, 2011
I'm trying to get connection to WMS; however after the connection is made, I don't get any layers in my list.
I've been trying many times, and the same result.
The situation is that the original Imagery were in LL84 and the provider transferred them to local CRS; since then I don't get any layers to view! Though I was able to see them before the transformation has made.
View 1 Replies
View Related
Jan 28, 2011
I'm trying to connect to a mysql database and I get this warning : "There was a problem accessing the connection's schema information. Item AREA is already in this named collection."
View 1 Replies
View Related
Jun 21, 2012
I've run into a problem with my "Jet.oledb.4" connection string not working for x64 machines. I've done some research and found out a few things, but am still confounded.
The code was written on a x86 XP machine with vb.net 2010 express. AutoCAD will load the dll just fine on x64 machines. Everything will work except the connection to the database. I tried installing the Microsoft Access Database Engine 2010 Redistributable for x64, but couldn't because the MS Office installed is x86!! Instead I installed the x86 version, but got the same unhandled exception at runtime.
Do I need to have the current x86 MS Office uninstalled and then install the x64 version of MS Office on those machines? Is it that the code is compiled as x86? If so, how can I compile to x64? I didn't see any options in settings, and haven't been able to find any examples.
The thing I really don't understand is that the same connection string ( "Jet.oledb.4") works in an old VBA routine on all machines!!
View 3 Replies
View Related
Nov 5, 2012
We are experiencing an infuriating and time wasting problem with SDE connected data.Users are properly set up (all 64 bit .dlls installed into the proper folders) and are using Autocad Map 2012 or Civil 3d 2012 (64 bit).
This problem does not happen every time but all too often. It is erratic and unpredictable in how it occurs between users.
When a given user makes a .dwg with connected data mixed with Autocad entities (or not for that matter) they can connect and work on a drawing normally. Once the .dwg is saved, another user will attempt to open the file. A couple of things will occur. One a 'fatal error' may happen and Autocad will have to be restarted. The other, and more common, is that the Autocad entities will begin to show and then when it appears to try to make a connection to the SDE Autocad will hang (the 'spinning circle of death' appears. Again this does not happen every time but very often.
The workaround to to recover the .dwg file, which deletes all connections and connected data, and then re-build the connected data. however, once that .dwg is shared again the entire problem may well happen again.
View 7 Replies
View Related
Jul 12, 2012
I have a Sql Server 2008 R2 database with gis features. I can connect to it and add the features to a map when using Map 2012, but not with Map 2013, even with the Sql Server hotfix installed. In 2013 I can log in to sql server and see a grayed out list of the feature classes, but I can't add them to my maps, and I get a message about no spatial data found, (or something to that effect).
View 9 Replies
View Related
Jun 21, 2012
I've copied Standard CC libraries to read/write libraries and modified the tables. Mostly fasteners. I've prefixed the family name and family description with our company name. When I "place from content center", it's easy to see our content because the families are prefixed with our company name. However, when I use bolted connection, some of the families do not show our family name as a prefix like "place from content center" does. People constantly pick the wrong fasteners. They select fasteners without our Item number, etc. Then, they need to delete the fastener and try again. I can't seem to get bolted connection to show some fasteners with the company name prefix like Place from CC does. However, some families do show it.
Inventor 2012 SP2
Windows 7 64-bit
View 9 Replies
View Related
May 27, 2013
Is it possible to break my bolted connection, so that i can change the information given by inventor in the BOM? Its always grayed out and i can`t seems to find a way to make it "ungrayed".
I could change it directly on the .idw but me and my project leader would like to not go on that road. Our teams are seperated in to two. Ones in charge of modeling & the other is in charge of the presentation. We would like to give, as much as possible, not to much leeway on those in charge of the presentation.
View 3 Replies
View Related
May 28, 2013
I'm trying to create a assembly with .NET to draw all objects from a chosen spec. I started from Plant3D SDK which have a sample project. Autodesk ADN support is too slow to answer some basic questions since they have changed support platform recently.
After hours searching and trying to reach the main goal, I understood how connections between objects are done. The connector is based on End Type of objects. I'm not a meterial guy, so everything is much more difficult to me At CreatePipeline (..Plant SDK 2013SamplesPipingCreatePipeline) sample we have a class PipelineConnector which create connector. The main problem is only Buttweld connector code is available at CreatePart method in this class. I'm needing a piece of code where creation for others connector types such as Socketweld are shown.
the CreatePart code below:
public override void CreatePart() { Database db = AcadApp.DocumentManager.MdiActiveDocument.Database; ContentManager cm = ContentManager.GetContentManager(); part.Position = InsertPoint; part.SlopeTolerance = 0.1; part.OffsetTolerance = 0.0; if (ConnTypeName.Equals("Gasket")) { // Gasket // //PartName = "Gasket"; var spGPart = GetSpecPart("Gasket"); PSPColl.Add(spGPart); var blockSubPart = new BlockSubPart(); ObjectId Id = ObjectId.Null; try { if (spGPart.PropValue("ContentGeometryParamDefinition") != null) Id = cm.GetSymbol(spGPart, db); blockSubPart.SymbolId = Id; } catch { } part.AddSubPart(blockSubPart); // BoltSet // var spBPart = GetSpecPart("BoltSet"); BoltSetSubPart boltsetSubPart = new BoltSetSubPart(); boltsetSubPart.PartSizeProperties.NominalDiameter = NomDia;
[code]....
View 1 Replies
View Related
Aug 3, 2011
I have some dwg files, shp files, images, and sdf files in my C: . I am using AutoCAD Map 3D 2011. When I try to open one of the dwg files it is showing a warnng message "Failed to open FDO connection".
View 2 Replies
View Related
Oct 15, 2012
I try to work with the 3D space navigator, but somehow I do something wrong (I guess) When I try to zoom it works fine until I'm really close at the drawing and then suddenly it zooms very fast and I loose the drawing from the screen. I then have to give the command Zoom all to find my drawing again.
Furthermore on a regular base Autocad shuts down when I "play"with de 3D connection. Can it be that this is an Cad problem or a space navigator problem?
View 9 Replies
View Related
Oct 31, 2012
I have a simple bolted connection (bolt, nut and washer) and have tried to pattern this to make a toal of 4 bolted connections in a linear pattern. The preview looks fine however when I hit apply the patterned components disappear. I'm not sure why this is, I am using Inventor 2013 64-Bit SP 1.1
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 1 Replies
View Related
Dec 26, 2013
I installed a bolted connection into my assembly and realized I chose the wrong length. I simply want to delete the connection and start over but there is no option to delete.Ctrl-Z will not let me back out of the connection either.
View 2 Replies
View Related
Apr 23, 2010
I will start to explain what I want. I want to place an iLogic component in an assembly. When I place the component a window should appear where I can enter some dimensions. That's it basically.
I have created a user form in VBA. With two fields for dimensions, an OK and Cancel button. There is no code behind it because I don't know what to place. The code in the form should send the filled in value to the user parameter in the model. e.g. "width: 50mm" to WIDTH.
I have an iLogic component with its parameters.
I have IV 2011. And studied the iLogic examples. But the part where I'm interested in is hidden in the .dll file which is used for reference.
View 3 Replies
View Related
Feb 27, 2012
Does Autocad Civil 3D 2011 can connect to ArcSDE 10, or do we need a higher version? When I put in the credentials, it errors and is asking about an sde91.dll.
View 1 Replies
View Related
Sep 3, 2013
the internet is still up, it will not use it unless I totally disable my network connection. That is a pain to have to stop and do. Would be nice if there was a option to always use local installed.
View 3 Replies
View Related
May 6, 2013
using 2013 and attempting to connect to a DEM downloaded from LSU Atlas. I get the "Failed to open FCO connection. Could not open/read from file" Am wanting to generate a watershed from the DEM surface.
View 2 Replies
View Related
May 9, 2012
I am trying to assembly some party, when after i do the bolted connection and select the fastener, after i choose him i cant select the length, he do this automatically. and because of that my fastener come out of my part.
Where can i change the length of the bolt? i use inventor 2012.
View 2 Replies
View Related
Jul 25, 2012
I normally leave my machine on, however if i do shut down. I find on start up that my 3D mouse loses its connection. Clicking on start driver does nothing. I have to resort to unplug/replug the usb for it to be recognized. This is annoying since this means that i lose some of my setting changes.
Inventor 2010
View 7 Replies
View Related
Nov 6, 2013
All of the sudden I cant get to my bolted connection dialog box.
1. The command runs and the prompts at the lower part of the screen show.
2. Have loaded and unloaded / restarted via add ins.
3. Have looked behind all windows ect on both of my 2 screens
View 3 Replies
View Related
Aug 1, 2012
I`m joining pipes together using the nut/bolt/washer method using constraints in assembly then using pattern feature.I`ve not used the bolted connection generator before so i am looking for some feedback on whether this is a better method to use.Is there any advantage to using the bolted connection generator over the placement of nuts/bolts/washer with constraints and then using pattern feature?
View 4 Replies
View Related
Jan 9, 2012
I am new at doing a ODBC connection and when I try to connect a database through our central system, this is the error message I got.Failed to cache features.
Failed to execute Fdo command. (2 consecutive occurrences)Table does not exist for class 'dbo:View_DH_UTM_COORDS (2)' (2 consecutive occurrences)
View 2 Replies
View Related
Oct 4, 2012
I've lost my Bolted Connection Templates... you know, the pre-defined bolt-washer-nut selections available for re-use at the bottom of the Bolted Connection dialoge box.
Did I lose or over-write a file? What file do my Bolted Connection Templates live in?
View 6 Replies
View Related
Jul 31, 2013
Using the DAta Connections tool under Planning and Analysis, also known as Map 3D, I have attached a series of shapefiles and I want to be able to toggle the view of some of them on or off depending on the viewport. Is this possible to do?
View 5 Replies
View Related
