When I try to open a raw (NEF) image from my Nokon D800, I get an error box titled "Photoshop cannot open this file". I looked for updates after installing CS6 but none were found. What's the deal? I read that the D800 was supported in the CS6 release.
View 2 Replies
I have just installed the CS6 upgrade to Photoshop CS4 Extended, but now the software will not read the RAW files from my D800.
I have followed Adobe's instructions to check that I have the correct RAW plug-in (7.0.0.308) which I have. I have uninstalled the software and reinstalled the software without success. I do not want to convert my RAW files into DNG files, so I have ignored that step.
The 'Open in Photoshop' instruction in Lightroom 4 does not open my D800 RAW files either, although the files can be opened in Lightroom 4 OK.
My nikon d800 raw files are visable through Adobe Bridge, but only as a Raw Icon, it does not show the image. When I right click on it to open in Camera Raw, I get a message that says "Camera Raw cannot open this file. If you are attempting to open a raw file from a digital camera, make sure you have the latest Camera Raw Update."
View 11 Replies View Relatedis there a fix to open nef files from d800 in cs6
View 2 Replies View RelatedI have CS6 running on mac 10.8.2 and can't open NEF's from my D800 and camera raw 7.1 won't install get an error Message.Tried uninstalling CS6 and reinstalled still can't open NEF's.
View 4 Replies View RelatedI just purchased and installed Photoshop CS6 (64 bit) to use with my Nikon D800. However, I can't open the .nef (raw) files but the .jpg files from the same camera will open. What do I need to do to open .nef files from the D800?
View 4 Replies View RelatedI upgraded to Photoshop CS6 from CS5.X and I can not open RAW files in Camera RAW for my Nikon D800. It functioned properly in CS5 with the latest RAW release but won't work in CS6.
View 2 Replies View RelatedI still cannot open RAW files shot by Nikon D800 in Photoshop, even with ACR RC 6.7 installed or even Photoshop CS 6 beta. Some seem to have succeeded by installing ACR RC 6.7.
View 8 Replies View RelatedI can't open NEF files of my Nikon D800 in PS CS 5.1 even though I have installed Camera Raw 6.7.
View 1 Replies View RelatedI have a D800 & lightroom 4.1 will NOT open or recognize my photos. They were shot normally, not in live mode or video or whatever I read while searching for a solution.
View 26 Replies View RelatedI am trialing LR 4.1 (Win 7 AP1 - 64 bit) and can't read Nikon D800 nef files. ACR 7.1
View 4 Replies View RelatedI have Adobe Photoshop(cs3 suite). Now, i have opened this on my laptop before(Dell latitude D600). All i did was load avast anti-virus and spybot. Now when i click on photo shop it say,
"Executable 'C:/program files/adobe/adobe photoshop CS3/photoshop.exe' had the following unrecoverable error:failed to load C:/program files/adobe/adobe photoshop CS3/photoshop.exe"
Anyone have an idea on how to fix this problem?
I cannot open Nikon D800 RAW image files in lightoom 2. My raw files will not import into lightroom (it imports jpegs, but not the RAW files) I am using Lightroom 2, version 2.7, camera Raw 5.7.
View 6 Replies View RelatedI have found support for Nikon D800 NEF files incomplete in Lightroom 4 with ACR 7.0.
NEF files created by the camera in 16:9 mode using the shutter release set to take stills (setting g4) cannot be previewed or imported in LR 4.
Setting g4 and the 16:9 mode are discussed in the Nikon D800/D800E User Guide on pages 324 and 68 respectively.
Photoshop with ACR 7.1 beta seems to be able to open these files.
In my Lightroom 3, updated top latest version I can't opne .NEF files shot on my Nikon D800 camera.
View 2 Replies View RelatedI have recently dowloaded the 2012 revit software. I am trying to open a new document to start a new project and when I click on it, a window pops up saying 'failed to open document.'
View 9 Replies View RelatedAfter a system crash, I was unable to open any of the autoback files. I get a "File Open Failed" error.
View 5 Replies View RelatedI have Lightroom 4 and as soon as I click to open the lightroom 4 application and message box pops up saying "assertion failed!" and then it doesn'tt open the program. I was working earlier but then my laptop has a bad battery and when I was editing in lightroom 4 my laptop shut off without warning (same thing as just pulling the power cable out of the outlet of a desktop when its on without shutting it off first). But anyways I have windows 7 and so I can get back to work. I was also hoping that I could fix this issue without erasing all the editing I did and all the pictures I have in lightroom.
View 1 Replies View RelatedI've been using VideoStudio Pro X2 for the past 2 years and it has been working just fine since, up until mid last week. I was rolling right along, creating MPEG-2's of the Classic 39 Honeymooners episodes, until I got up to Episode 24, when I started getting the 'Failed to open the MPEG encoder' error message. I searched through this forum to find any possible solution and the only solutions I found were to check to see if the MPEG-2 encoder CODEC is installed, which it appears to be according to the InstalledCodec utility and to uninstall/reinstall VS, which I did. I still receive the same error message, however. What could cause it to go from working one moment, to not working the next?
I tried to attach a text file listing all of the installed codecs on my system, so you can look to see if the needed codecs are installed, however I was unable to attach the file...says 'extension not allowed'. How to upload the file.
I have some dwg files, shp files, images, and sdf files in my C: . I am using AutoCAD Map 3D 2011. When I try to open one of the dwg files it is showing a warnng message "Failed to open FDO connection".
View 2 Replies View RelatedA co-worker and I came in this morning and both of our inventors are giving us this Faild to Open error. We run on single user accounts and we do not use vault. I then tried to backup all of my documents, but it would not let me backup either. I did a properties on the folder and it showed everything was read only. I click off read only and it let me backup. But still will not let me open a model part or assembly??? I tried turning off Avast and that did nothing either.We are still running 2008. Inventor and Autocad.
View 3 Replies View RelatedI'm working in one of my colleagues drawings and whenever the drawing is regenerated (for instance when panning or orbiting) I get the message "Failed to open record!".
View 4 Replies View Relatedmy drawing file has failed to open. when i try to open i geta feedback of drawing file invalid.i need this drawing before saturday 9th 2011.
View 4 Replies View RelatedI created a macro for generate a PDF drawing, but when one file has been already created, AND he's already open, the macro don't work.
How to stop the macro automatically and notify that the macro has been stopped because the file is open.
Below, the current macro :
Sub PublishPDF()'Get the PDF translator Add-In.Dim PDFAddin As TranslatorAddInSet PDFAddin = ThisApplication.ApplicationAddIns.ItemById("{0AC6FD96-2F4D-42CE-8BE0-8AEA580399E4}")'Set a reference to the active document (the document to be published).Dim oDocument As DocumentSet oDocument = ThisApplication.ActiveDocumentDim oContext As TranslationContextSet oContext = ThisApplication.TransientObjects.CreateTranslationContextoContext.Type = kFileBrowseIOMechanism
[Code] ....
I completed a video and when I went to 'Create a Video File' I would receive the following error message...
"Failed to open MPEG encoder"
I'm using Ulead VideoStudio 11+. The 'vsp' file is too long...One hour fourteen minutes. I made a 'Part 1' and cut the vsp to forty-five minutes and still received the same error message.
I cut the 'vsp' to one minute thirty seconds and it would "Create a Video File'. I've never had this problem before.
It seems with Ulead VideoStudio 11+ whenever I have a problem like this I can resolve it, by backing up all the files, then removing the program, thoroughly clean the hard drive and re-install 11+.
Error message:
"Failed to open MPEG encoder".
I'm using Ulead VideoStudio 11+ and when I try to render a completed video to a file I receive this error message. The video is a little large, one hour fourteen minutes, so I cut it in half, saving it under a different name and it still gave me the same error message. However, if I render a very small clip then it renders as it's suppose to.
I've never had this trouble before. I reloaded the software for 11+ but that didn't work.
When i am taking uv snapshot, an error is seeing.
Error: Failed to open output file: E:WORKSMayaMaya WorksSwordimagesoutUV.jpg
When attempting to attach WMS data, Map Task Pane>Display Manager Tab>Data>Data Connect dialog>Data Connections by provider.
After entering the server name or URL and choosing "connect" I get the following errors:
"Failed to open FDO connection"
"The HTTP request URI was not found by the server"
It seems to work just fine for other users using the same steps.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
We have stored lisp in fileserver which 30 users can access it. Now a day some users have getting the ‘failed to open project’ error after load the Lisp due to this they r also not getting most of the commands. The full rights have been given to appropriate folder which contains (Autolisp application source file, .vlx, Autocad VBA source). It has working for limited users (8-10 users).
Server OS: Windows server 2008
Note: Previously we had used windows server 2003.
I have just purchased CS6 and been using it fine with my RAW files from my D700. I have just purchased a D800 and it will not open the files. The version says it is V7 which is supposed to work? I have tried using the updater and it keeps coming back with a message saying the sever is offline?
View 2 Replies View RelatedFault: Jobs do not complete but exit after second RAW file is read.
System: 2010 MacBookPro - Snow Leopard
Reproduceability: Intermittent - jobs tend to complete when Photoshop is launched but fail thereafter. Similar, inconsistent, behaviour when launched from Mini Bridge or within Photoshop
Seen elsewhere: NO! Same version of software on same OS works without fault on 2009 MacPro
Problem first observed: After switching from a D300 to a D800
Problem sources eliminated: Graphics Card
Other: Some reports of Ruler units being an issue - this was also eliminated as an issue. More system resources have been given to Photoshop in Preferences, without any measurable impact.