I have a polyline that I would like to have a thickness of 1. But I'd like the thickness to apply on one side of the line or the other. Not from the center, thus allowing 0.5 on either side of the center.
View 6 Replies
I don't want material 1,2 or 3 and I set them to zero...but the event viewer gives error messages... the input parameter value should be > zero
2013 Civil 3D
I am not sure how to change this, but I am adding polylines and they are coming in with a "Thickness" of 4" in the properties palette (7th option in General area of properties). The Global width is set to 0 and it shows correctly in a 2d plan view, but a 4" thickness if I do a 3dorbit.
View 4 Replies View RelatedI've been working on a floor plan after which I wanted to mark the border of a particular area. So, I drew a polyline surrounding the space and used a 2 (inch?) lineweight. It appeared on my screen to be very thick so that was great. The problem is I can't seem to draw any other polyline without seeing this big thick line on my screen - even if the linewieght is set to something thinner. It still "shows up" huge. It's like my viewing setting is frozen to only show polylines real big.
View 2 Replies View RelatedIs there any option to convert "Circle" to polyline and give thickness.
Usually i draw a circle and use polyline command and use " arc " to give thickness to the circle.
I know that it's not the proper way.
I want to use this thick circle for making viewport.
why the side view (Heavy Timber-Side.rfa) represents the thickness of the members rather than the face dimension? For example: A 2x10 (which isn't really heavy timber anyway) is shown 1-1/2" thick rather than 9-1/4" when the side view family is used to draw items.
Wish the family names had been a little more logical (i.e. Heavy Timber-Thickness.rfa and Heavy Timber-Face.rfa)
Seems like these families should at least coordinate with the section view so the top view was thin and the side view was wider.
Can you apply a jpg to the side of a 3-D box in AutoCAD? I think I remember doing this with Rhinoceros before, but unfortunately I don't have access to that program right now.
View 4 Replies View RelatedI'm making a polyline arc and would like the arc to go the other way. What button do I press to make that happen? I stumbled upon it one day, but have forgotten the button.
View 6 Replies View RelatedI have written a function to draw polyline (with dimensions), by getting input points from user.
[URL]
Now, I have to give a provision for user to edit the dimension of each side.
I have also written a function in which if the user double click on the dimension, a dialog box will appear and prompts for new distance.
My problem is now writing the program to change the polyline segment based on the new distance value.
how to offset a opened polyline by pick point on side of opened polyline.
View 3 Replies View RelatedWS with R2013 & R2014 installed side by side.
R2013 is stating on start up that the Geotechnics module has been loaded and displays the Tab for it.But I haven't installed the Geotechnics module for 2013 yet and it doen't work.
I downloaded AutoCAD on my windows 7 home premium,but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 1 Replies View RelatedI've got to plot several "half-size" sets of drawings (originally 24x36 drawings) and I am trying to minimize paper waste. I thought there was a way to set the drawings to fit multiple copies side by side but I am at a loss right now.
Civil 3D 2011 Version 2.1
Win 7 x64 SP1
Intel Core i5 3.33 GHz
4 GB RAM
I downloaded AutoCAD architecture 2014 on my windows 7 home premium, but when I click on the application it says "the application has failed to start because its side-by-side configuration is incorrect.see the application event log or use the command-line sxstrace.exe tool for more detail." I tried repairing it but that doesn't work.
View 2 Replies View RelatedI have just updated to Windows 8.1,(32 bit) and when I try running Autocad 2013 I get this message:
C:Program FilesAutodeskAutoCAD 2013acad.exe
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
what the "application event log" is or the "command-line sxstrace.exe".
Is it possible within the drawing to have model space and paper space displayed side-by-side like two vertical split screen viewports?
View 3 Replies View RelatedI am trying to invoke AutoCAD 2012 and am gettting the following error: CUsersatillgrenDesktopAutoCAD.exe "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
View 2 Replies View RelatedCan AutoCAD do something like Showcase - display two drawings side by side and zoom them simultaneously?
View 2 Replies View RelatedI just installed AutoCAD LT 2008 on another computer, it did fine for a couple of days then I received an error. Application failed to start because side by side configuration is incorrect see event log for further details. This is a "fresh" computer with vista, but since it ran okay a few days, I don't think that is a factor. I am not running another version on it, though I did intall this upgrade without first putting my 2006 on it, but if that was the case, why did it run a few days? How do I access the event log?
View 4 Replies View RelatedIs it possible for me to plot 2 pdf plots side by side on to A1 as we have no A2 paper?
View 5 Replies View RelatedI have a hatch pattern in one of my objects. I want to apply exactly the same hatch pattern to other objects but I don't remember the settings for original hatch.
There is a command in ACAD to apply properties of one object to others (brush icon in toolbar). I tries to use this command but it seams that it doesn't work for hatch.
What is easiest way to apply a hatch pattern from an object to the other one?
The problem I'm having with Skin Morph is that it's skewing my vertices side-to-side locally.
I'm using Skin Morph to better preserve the volume around the two joints of each finger of my hand model (See Arm1).
The two skin morph targets were created for the index finger while it was in the same position as the second image (Arm2).
I repeated this process, creating skin morph targets for the other two joints on the three other fingers and on the thumb.
The problem comes when I rotate the knuckle joint in any axis, in the third image (Arm3) I've rotated the knuckle downwards and you can see the vertices affected by the Skin Morph modifier have skewed to the left. When I turn the modifier off the vertices go back to their original position - so the problem isn't being caused by something like non-uniform scaling of my model (I reset the transforms before skinning).
The fourth image (Arm4) just shows the basic child/parent relationship that I've setup with the Bones and SplineShapes.
The fifth images show the (perhaps strange) position of the Driver Bone Matrix and the Morph Bone Matrix which could be constributing to the problem somehow.
I've uploaded the file so that you can explore my scene. armrigskinmorphproblems.zip
3ds Max 2013 64-bit Student Version
nVidia GeForce GTX 560
Windows 7 64-bit
Intel i7
I need to put two pictures side by side to merge one person into a group shot. I had it once, but, the image of the one person was too big, and I could not figure out how to put that picture back and get another one to try.
View 1 Replies View RelatedIn Photoshop CS6, a very important button is missing from the toolbar — the one to show two images side-by-side or above-and-below, and multiple images in other arrangements. I need this button — it’s an important part of my. (BTW, the button is still in Illustrator CS6.)
View 7 Replies View RelatedIm having a problem editing a photo 'face' one side 'left' side is lighter than the right side because of lighting. I was wondering If I could get both sides even prefably the lighter side like the normal side.
Is this possible? Because everytime I try edit the lighter side it still remains lighter.
Is it possible to combine two side-by-side photos into a single photo
View 1 Replies View RelatedWhere can you compare 2 photos side by side in Full Screen in Elements 11? Version 9 has this feature under Display View.
View 1 Replies View RelatedI have two picture files and I just want to create one file, displaying both pictures side by side. I have been reveiwing all of the functions in my Adobe Photoshop Elements Version 11 and I can't figure out how to do it.
View 2 Replies View RelatedI've just recently purchased PSP X4 since they touted that it was much faster loading and more stable (X3 was horrible about crashing). I continue to be amazed at how they (Corel) can just keep digging a hole instead of actually improving this product. I can see why they continue to lose market share.
1) I can no longer open mulitple images at the same time for side-by-side comparison. The work area now will only accommodate 1 open file at a time.
2) I miss not having the file size included in the data box that appears when you hold the cursor over a thumbnail. It was always handy when downsizing (resizing) photos for posting.
3) It is a pain now to have to go back and forth from the "EDIT" tab to the "MANAGE" tab to view full-sized photos (without having to open one at a time). They really screwed the pooch in X2 or X3 (can't remember) when they got rid of the old Organizer format. It was soooo easy to navigate; you had a screen full of thumbnails, you saw what you wanted and clicked it open....just too easy I guess!!! I was hoping they would go back to it for this version. I know in other forums, this change really rankled a lot of users. They just seem to bounce around trying different things. I wonder who the h*ll they use to test this stuff in-house.
I do like the faster speed, but don't know if I'll go for any more versions after this or not (been here since V.7 when JASC owned it). Big mistake selling if off to Corel. I've just about had it and there is some decent up and coming competition out there nowdays.
Computer Asus G50VT, Processor Intel Duo T9400, 4 BG Ram, 2 x 500 GB HDD, Nvidia GeForce 9800M GS 512 MMB
I just move from Win VIsta Ult. to Win 8 Pro 64bit.I installed PSP x4. The installation went fine, but when I try to start the program I get the following error:
The application failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more details.
I am missing Visual C++ runtime files, but I installed VC++ runtime files 2005, 2008 and 2010 both x64 and x86. Didn't work.
I also tried to install PSP x3, same error...
I ran sxstrace.exe but it means nothing to me. See the results below:
=================
Begin Activation Context Generation.
Input Parameter:
Flags = 0
ProcessorArchitecture = Wow32
CultureFallBacks = en-GB;en;en-US
ManifestPath = C:Program Files (x86)CorelCorel PaintShop Pro X4Corel PaintShop Pro.exe
[code]....
I am sure that you must be able to do it...surely..but how can you see images side by side, so that the original is on the left and the edited on the right?
View 6 Replies View Related
