Both workstations are Win7 64 bit, how to get the Materials & Appearance Browser to show up on the computer that it is missing from?
On one workstation I get the following menu
On the other workstation I get this
I'm currently setting up the sheet templates for our office to include page setups for the various sheet sizes (Arch D, Arch E, Arch E1) and output types (full size, half size, 11x17).I have created a PC3 file for each sheet size and output (ArchD full size and ArchD halfsize use separate PC3's) to best utilize the paper sizes made available to us. After testing from my machine, I went to test it from another users computer and ran into problems.The trouble doesn't lie with plotting to our plotter, in fact it works everytime. The trouble is when publishing to CutePDF. When I open the file on this users machine, I can't even click the page setup for the CutePDF. It continually defaults to None.
I've copied all the PC3 files (yes, I even created one for CutePDF) to this users machine, but still cannot get the page setup to work.I've always thought that defaulting to the None plotter was an indicator that your machine doesn't have the correct PC3 file, but that shouldn't be the case in this instance.
We are running AutoCAD Architecture 2012 on a Windows 7......64bit workstation and AutoCAD will suddenly crash for no apparent reason. When I look in the event log it makes a reference to the AcDB18.dll
View 6 Replies View RelatedI installed the 2013 version onto my windows 7 64bit and after the installation process I launch the program and it freezes and then says there is an error. I have unistalled and reinstalled twice now with no luck. I attached a screen shot of what is going on.
View 9 Replies View RelatedFATAL ERROR: Unhandled Access Violation Reading 0x0020 Exception at b0ba4c12h
Ive looked around the forums and cant seem to find a solution. I was running AutoCad on Windows 8 just fine before...
I have an issue between XP 32 bit ACAD 2011 workstations and Windows 7 64 bit ACAD 2011 workstations...
1 - A Windows 7 user does a Paste Special>Paste Link>Microsoft Excel to insertembed a portion of an Excel worksheet into the DWG.
2 - various win7 and XP users make changes to the Excel worksheet directly in Excel
3 - Win7 users open the DWG to see the correct and updated Excel data in the DWG
4 - XP users open the same DWG to see OLD data from a previous save and not the correct updated data on the linked worksheet
5 - XP users directly open the Excel file in Excel and are able to view the correct updated data BUT NOT IN THE DWG
6 - XP users see old incorrect excel worksheet data in the DWG. Win7 users see the correct data in the DWG.
Can a 64bit and 32bit workstation workshare with no problems?
View 2 Replies View RelatedIs Kaspersky Anti-Virus interfering with Gimp start up??? ever since I installed Kaspersky Anti-Virus 2013, Gimp takes more than 20 minutes too start up, it searches for data files for more than 20 minutes straight before my image is opened in Gimp ever since Kaspersky was installed!
View 1 Replies View Relatedhow I can install the 'Other' library content into the Content Centre?
I need the Australian Standards content but I was unaware that it didn't install automatically when I installed Inventor software, and from what I've read it's contained in the 'Other' library which I was also unaware you needed to install.
How can I solve the problem without uninstalling/ reinstalling? I'm using the downloaded Student version.
I've read that the Error 1603 is just a windows error saying that installation failed. I'm trying to figure out why I cant get the content Center to install. I already have Autodesk Inventor 2011 installed on my machine and for whatever reason I accidently unchecked the install content center (this was some time ago). When I go back into the install and try to run it it doesn't work. now I dont have the DVD's but I copied the DVD files to my Computer onto a back-up hard drive. The DVD's have been since packed away. is the content center failing cause I'm running the setup from the Disk1zip and the content center Files are on Disk7zip or is something else interfering with my install?
View 1 Replies View RelatedI am trying to install the student version of autodesk inventor 2011, and I'm using the default installation settings. The installation aborts when installing C++ and this is the message I get in the install log:
2011/1/9:17:36:18 Bobby Porwal NP-CHU === Setup started on NP-CHU by Bobby Porwal ===
2011/1/9:17:38:56 Bobby Porwal NP-CHU Install Microsoft Visual C++ 2008 SP1 Redistributable (x86) Failed Installation aborted, Result=1603
I get an error now after instaling Inventor 2012 when I am using 2011( because of a project with other users I am on).
I get this error.
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
I have 2013 inventor/mechinical a cad did not have enought memory on c: drive added another hard drive E: need to move my files to the e drive. single seat all on this computer.
View 4 Replies View RelatedI have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
I can't get Inventor 2013 show a custom iproperty correct.My iLogic rule is this:
iProperties.Value("Custom", "myvol")=volume = iProperties.Volume
But the custom iProperty is a Yes or No.Had no problem with this in Inventor 2011.
Can't seem to locate the Inventor Material Library....under Default in Projects, the Inventor Material Library is highlighted in Red. Where I need to browse to inorder to locate it?
View 2 Replies View RelatedI am trying to load Map 3D onto this computer. After downloading the Autodesk product from their web site which took hours I would like to try to get this guy up and running before I have to download it all over again.
I go thru all of the steps of the setup, enter the serial number and key code and get green checks to each of those fields. When installing the program it runs almost to the end and then I get a error 1406 message that says I don't have the use of this key? I bought this computer from a classmate and he did have a DWF viewer on it but I have deleted all of those files. The Map 3D guy still fails to load after clearing out all of the files. I have scouted around on the net and have seen posts where Autocad leaves some files running in the background. How I can get around this error code? I try to run the trial version that needs no serial or key number and the same error code appears.
I am having trouble installing the "AutoCAD Architecture-MEP Object Enabler for AutoCAD LT." Whenever I try to install it, I immediately get a screen that says, "Setup was unable to detect any target applications for AutoCAD Architecture-MEP Oblject Enabler for AutoCAD LT." I have tried restarting the computer, running the install program with LT on and off, etc.
View 9 Replies View RelatedWe just installed AutoCAD 2012 on a machine that was running 2006. (32 bit on Windows XP Pro).
We opened a file that was created in 2006 and the Text is missing from the file. I tried to create a new file and when I start typing text, nothing happens.
I installed the service pack update and hot fix and still doesn't work. I've tried re-booting and nothing happens. I tried to go in and migrate the tools from 2006 but it was already done.
note, that this has also been installed on another computer and everything worked fine.
We are instaling Windows 8 this evening and I am trying to export the settings from C3D/map 2011.1) Is it possible to export your setup, which would capture a screenshot, so thal your toolbars and menus that you have set can be imported into your 2011 re-install? 2) In Options the Profile "Export" is the setup for your File path defaults under "Options" "File"? 3) SYSDVLG will export all my default settings, which I can import into my initial "Drawing 1" after re-install?
View 4 Replies View RelatedI'm having a constant problem with Autocad 2010LT crashing on startup. After clicking on the AutocadLT 2010 icon the program starts to run, I see the start-up screen, and then everything disappears without any notice or error message.
I have installed service Updates 1 and 2 as well as the "Startup Error and Text Editing Hotfix". Nothing that I have read on the forums seems to fix the problem. I'm running Windows 7 Professional (64-bit). I should also mention that I have been running this version of the software on this computer without any issues for over 1 year before encoutering this problem.
I have tried unistalling framework 4 and reinstalling using the standalone installer. I have also used the framework clean up tool with no luck. I have tried to repair the installed framework 4 with no success. I have tried all of this with my antivirus turned off and I have tried to use Microsoft fixit along with running Ccleaner registry fix.643 Error.
View 3 Replies View RelatedI am using inventor 2013 and have a very large assembly consisting of many sub assemblies and I want to perform a FEA on it. I went to the tutorials to see where to find it and it said it is under "Environments" on my ribbon. However, I can't find it anywhere. How do I access it?
View 6 Replies View Relateduntil now I've always used ACADINST.exe to realize my self-installing setup packages for my application lisp: [URL]
Now there AutoCAD2014 which introduced some variables that affect proper operation completely automatic: TRUSTEDPATHS and SECURELOAD.
Is there a way to add search paths, modify variables, load menu, set the automatic start of a *.Lsp or *.Fas, during installation of the application, without opening AutoCAD?
We have found that after installing SP1 for Inventor 2013 is nearly impossible edit derived assembly. It takes very long time for open dialog of Derived assembly, without SP1 it takes approx. 2mins. for assembly of 20000 instances, with SP1 it takes more than 2 hours! This we are able to reproduce on each of our station. And more, there is still not corrected bug with save setting of hole patching range. This setting does not remember min and max value and after re open this dialog the range is set back to default value 10-9999mm.
I have tried ti disable antivir and all unnecessary services - no effect.
Inventor 2013SP1, Win7SP1 64bit, Eset Endpoint Antivirus 5.0.2126
Can I create an FBX file in Inventor 2013? If so, how would I do that?
View 4 Replies View RelatedWe are using C3D 2013 and have recently had 3 different episodes where a dwg file was open and being worked in, CAD shut down without warning and the drawing was lost. As in, it's gone. No longer on the network anywhere. These were 3 different drawings in different projects.The drawings were not new, they had been previously created and worked in by more than one user. We were able to find a backup file and did not lose every thing but still thinking there has to be something causing this. The machine is a Dell Precision T5600, 16 GB of RAM, only had it for a few months.
View 1 Replies View RelatedI am having problems opening an idw created in the 2013 version on my inventor professional 2014.
The idw contains its own template, views, dimensions, details and cuts.
Upon opening in 2014 to release details of the scale is changed randomly and the views are out of the leaf.
I've just upgraded from 2011 to 2013 and come across this problem.
In 2011 I could edit a component from the top level anywhere in the tree - i.e. From an iLogic rule in the top level, I could edit a component in a subassembly.
This doesn't seem to work in 2013 - I can only edit the first child of a component.
In 2011 I could simply use :
compo = Component.InventorComponent("TOP")compo.Edit
Is is possible to simulate a part with a crack in inventor 2013? A customer had a part made and noticed there was a crack. We were asked to run an analysis on the crack to determine how much of a factor this crack has on the part. Is it simply just a matter of sketching the shape of the crack and removal of material or ??? The part is cylindrical in shape and the crack goes approximately 1/8 around the diameter of the part.
View 2 Replies View RelatedI was wondering if there is a plot stamp option in inventor, like there is in autocad?
View 3 Replies View Related