I am using inventor 2013 and have a very large assembly consisting of many sub assemblies and I want to perform a FEA on it. I went to the tutorials to see where to find it and it said it is under "Environments" on my ribbon. However, I can't find it anywhere. How do I access it?
View 6 RepliesJust loaded 2013. Of course right away I get an error. "Internet access is required to access the Help" Well as you can see I have internet access.
View 4 Replies View RelatedDoes Revit DB LInk 2013 is compatible with Access 2013?
View 1 Replies View Relatedhow to access the Aec Model(Imperial Ctb).dwt in the template file.
View 1 Replies View RelatedHow to add the “CANNOSCALE” on the quick access bar?
I tried to add the “CANNOSCALE” on the quick access bar but sounds it is not on the list of the “customize user interface”!
What I’m supposed to do to add it?
I made my first installation of Autocad 2013 on this computer. Unfortunately the quick access toolbar appears whitened as you can see in the attached picture.
View 8 Replies View RelatedFATAL ERROR : Unhandled Access violation Reading 0xffffffff Exception at e38e0004h
Installed Autocad 2013 a while back worked smoothly until yesterday since when it does not open cannot create new files and at the same time cannot open any existing ones
I have a Lenovo Z570 i5 2nd generation processor, 8gb ram , 500gb hd, 2gb nvidia geforce with cuda integrated graphic card, genuine windows 7 home premium 64 bit
i have tried repairing the installation from control panel, and re-installing it again but to no use..Looked it up on the internet and downloaded the service pack and installed it but to no use again !!
Today I receive FATAL ERROR unhandled access violation writing 0xee300200 exception at e0093851h, where I start to investigate?
View 2 Replies View RelatedI have installed 237 MB offline help setup for AutoCAD 2013. But I am unable to access the offline help dialogue box in contents form.
I am attaching the image of Microstation help dialogue box in content form, I need same help dialogue box in contents form for AutoCAD too so that I can self-learn AutoCAD.
Recently our company upgraded to office 365 with Microsoft Access 2013. I cannot seem to connect to this new format using the task manager. We used to use quite an old version, 2003 I think with no worries.
Am I doing something wrong or have the developers missed something quite fundamental to Map 3d?
I want to access the solid opened in AutoCAD from dwg file using C++ and Object ARX.
View 3 Replies View RelatedOn some computers I have a problem. The down arrow at the right of the quick access toolbar doesn't show. I checked that my interface is not lock too. So to customize the quick access toolbar I have to use the CUI.
I don't know if it's related, but my customize toolbar (from my partial menu) have to be displayed manually each time I start AutoCAD but not my custom tab in the ribbon.
so i've been getting this pop up window everytime i try to open autocad today. yesterday night i was using it fine.now whenever i try to open the program, it says "fatal error unhandled access violation reading b14c4b12h"..i sent an error report to autodesk and they suggested a patch. and after restarting my pc its still not working.
i have win8.1 with autocad2014.it pisses me off koz i have school assignments to do and it's not working
I'm using Autocad 2013, when I open my existing files this appear and program shut down
“Fatal Error: Unhandled Access Violation Reading 0xc075ddf8 Exception at e6197bd9h”
Attached herewith is a screenshot
Inserting blocks from Design Center into model space causes the fatal error: access violation message to pop up.
This never happened in 2012, and I used it from day one.
My livelihood as a 2D drafting student depends on being able to use the blocks from DesignCenter, and now all of a sudden (I've been using 2013 since the day it released with no problems at all until about a week ago) it crashes every time I try to insert a block, regardless of which method I choose to insert with (i.e. right click insert or dragging into the model space window).
I'm on an Alienware M17x R3 running Windows 7 Home Premium with a Quad-core intel i7 processor, 16 GB of RAM, and an NVIDIA GTX 560M 1.5GB graphics chip.
I've tried system restore, program repair, clean uninstalls, and none of it fixes the problem. It seems that once the levee broke, so to speak, the bug is there to stay. Or perhaps more accurately, it was there the entire time and it was only a matter of time before it surfaced.
In either case, I would love, after having been a guinea pig, to see a patch issued for this if possible. Not being able to use the sample dynamic blocks is hell. Barring a patch sometime soon, I'm strongly leaning towards going back to 2012, which worked like a charm.
I Have an Error (( autocad 2013 fatal error unhandled access violation writing 0x0000 exception at 0h ))
View 1 Replies View RelatedWe're running Autodesk Product Design Suite Premium 2013 on computers specficially designed by chaps so they meet the required spec (Windows 7).For two months we have been running this product without any problem however over the weekend we moved offices and the computers have been "poked about" by the IT support team as they moved servers / changed admin rights / drank coffee. This problem however is only affecting the one computer - the other is running fine so I assume they've not broken anything.
It ran on Tuesday til Thursday without any problems however this morning AutoCAD is having an abortion hissy fit (fifth crash in two hours) and I am getting:
"Fatal Error: unhandled access violation 0xffffffff exception at e47fde0ah" crashing the system while moving lines on a very simple AutoCAD 2D drawing (500kb). This
I've turned Aero Theme off and am running no other computer programmes (CPU sits at 13% when it crashes and doesn't spike).
Every time I run AutoCAD 2014, I get this message:
Fatal Error: Unhandled Access Violation Writing 0x006c Exception At a5d45122h
It then shuts the program down, and asks if I want to send an error report to Autodesk, which I have done.
I'm running Windows 8 Pro.
I recently installed AutoCAD 2013 onto my computer which has windows 7 64 bit operating system. After completing installation, I tried to open AutoCAD and immediately I recieved this error, "Fatal error: Unhandled Access violation Reading 0xffffffff Exception at 70cbe8e1h.
View 9 Replies View RelatedI checked almost everywhere but there is no error i get .. Fatal Error : Unhandled Access Violation Reading 0xffffffff Expection at faad0004h .. I removed all the files and installed again but did not work ..
View 7 Replies View RelatedI have continuously been receiving Fatal Error codes following with my AutoCAD to crash by just saving my drawing.
FATAL ERROR: Unhandled Access Violation Reading 0x53fefc14 Exception at ed091e2bh.
FATAL ERROR: Unhandled Access Violation Reading 0x9ffd3a31 Exception at f797dcf9h.
Also, i having Runtime Error. R6025 - Pure Virtual function call.
I have repaired, uninstalled and reinstalled AutoCAD. I use Windows 7 64 bit. Everything is up to date.
I have a CAD user when they try to print they get a Fatal Error
"FATAL ERROR: Unhandled Access Violation Writing 0x0034 Exception at 6ce5a6b4h"
What does that mean?
I am trying to write a small standalone app in C# that I can run when I have an assembly document open. I want the app to iterate through all the parts in the assembly and set the iproperties. I am having some trouble accessing the iproperties however.
I want (for example) to set the "TITLE" in the "DOCUMENT SUMMARY INFORMATION" to be a concatenation of the part number and the description separated by a " - ".how to access these properties.
My company has an excel program that extracts data from AutoCAD title blocks, processes it, turns it into printable spradsheet BOM's, and uploads the data to our ERP software. We're currently starting a transition form AutoCAD to Inventor. I've been asked to figure out how to make our excel program work with Inventor.
I'm hoping (but not expecting) to be able to change some lines around in the section that deals with extracting data and get it to work that way. I'm pretty sure of what needs to change, but I'm not so sure what it needs to change to. Does anyone know of any resources that someone who just started programming a couple weeks ago (me) could look at to learn more about how Inventor interfaces with VBA?
The other possible route I see is to export drawings from Inventor into AutoCAD.
The excel program reads block attributes. I've read that Inventor's version of attributes is prompted entry text, however, when I export Inventor drawings with prompted entry text lines that match the attribute lines from the old AutoCAD block they come in different. They're not editable inside of AutoCAD and the excel program doesn't see them. I haven't the slightest idea what's happening here.
A third way would be to use Inventor's iProperties, but there again, I don't know where to find information for the coding side.
Is there any way you can access an AutoCAD file embedded in an IDW by using VBA?I have an IDW with about 100 sheets; it would like to control which file is embedded in each of the sheets.
The best would be to use linked files but I do not know how to make certain files visible on certain sheets.
For a while now whenever I open a new assembly the default is place from content centre, I use the drop-down and select place.
Today I needed place from content centre and it just doesn't come up.
It is loaded/automatic in the addins.
If I open my projects, in the bottom right corner where I would usually click to acess my installed libraries, I click but it does nothing!
I also noticed studio and BIM are greyed out, but I have started to play with Showcase so not really a problem. I need to set up a read/write library soon, so it's going to be a problem.
I was put in charge of modifying The commun library of our content center. Later today, i found out that one of our draftmen played around our library and modifying some of the preset that i setup.
My question is: What can be done to limit access (Putting it at Read-only) to certain library for certain users without limiting my own access?
Also, I'm pretty sure its not possible but ill ask anyway, is it possible to know who modify those library and when?
I'm using Vault
Inventor Version: 2014 SP1
Config : Intel (R) Xeon (R) CPU E5506 @ 2.13 GHz, 24 GB, 64bit win7
I have a problem for code files in inventor, my intention is codify this files whit a personal code name.
I need to launch the "SAVE AS" changing the file name that I need, with the possibility of modifying it.
ThisApplication.CommandManager.ControlDefinitions.Item ("AppFileNewCmd"). Execute
Works smoothly and launches the open document window, but
ThisApplication.CommandManager.ControlDefinitions.Item ("AppFileSaveAsCmd"). Execute
does nothing, either fails. At the same time would need to know how to rename the file to display.
I have a model with two Workpoints and have to automatically create a dimension for these workpoints in a drawing.
The drawing has two views, a basic view and a section view.
The dimension of the workpoints has to be in the section view.
When doing this by hand, I would select the section view in the model browser, select the view's model, and then select the models centermarks and make them visible in only this view. After this I can select the CenterMarks for the dimension command.
When I look at the API, the workPoints are represented inside the drawing as CenterMarks, but the CenterMarks are children of the sheet and not children of a view !
And there are only two CenterMarks on the sheet, when I manually can select four (two in each of the views).
How can I programmatically access the centerMarks in a specified view ?
I have a problem for code files in inventor, my intention is codify this files whit a personal code name.
I need to launch the "SAVE AS" changing the file name that I need, with the possibility of modifying it.
ThisApplication.CommandManager.ControlDefinitions.Item ("AppFileNewCmd"). Execute
Works smoothly and launches the open document window, but
ThisApplication.CommandManager.ControlDefinitions.Item ("AppFileSaveAsCmd"). Execute
does nothing, either fails. At the same time would need to know how to rename the file to display.
Is there a way to access AEC-data (connection properties etc) using the SDK?
View 1 Replies View Related