AutoCAD Inventor :: Access CenterMarks In Specified View
Mar 27, 2013
I have a model with two Workpoints and have to automatically create a dimension for these workpoints in a drawing.
The drawing has two views, a basic view and a section view.
The dimension of the workpoints has to be in the section view.
When doing this by hand, I would select the section view in the model browser, select the view's model, and then select the models centermarks and make them visible in only this view. After this I can select the CenterMarks for the dimension command.
When I look at the API, the workPoints are represented inside the drawing as CenterMarks, but the CenterMarks are children of the sheet and not children of a view !
And there are only two CenterMarks on the sheet, when I manually can select four (two in each of the views).
How can I programmatically access the centerMarks in a specified view ?
I have a .stp file that I am trying to dimension on a drawing. There are about 100 or so lightening pockets that are all the same basic shape (a rectangle with a full round on the ends). As of now I have been manually making a table for each location. Is there a way to create something like a hole table to automatically capture the locations of the pockets and create a corresponding table? I know I can create a centermrk on the round portions to use with a hole table but I want to dimension from the center of the pockets for the table.
I'm attempting to use VBA to put center marks on each hole in my drawing. So far I have the following
Dim oIntent As GeometryIntent Dim oCenterOfPart As Centermark 'Add center marks to base view For Each oCurve In oBaseView.DrawingCurves ' <- need to identify Hole Features If Not oCurve.CenterPoint Is Nothing Then If oCurve.CurveType = kCircleCurve Then 'CurveTypeEnum
[Code] .......
oBaseView is the DrawingView object representing the base view the code just placed. I also used VBA to place the projected views oTopView and oRightView. I want to add center marks to each hole when viewed from the end (as circles) and add centerlines when viewed from the top or side (as hidden lines).
I will be iterating through several models representing various handhold styles. The feet can be in many orientations, 99% of them are paralel to one of the origin planes (XY,YZ, or XZ).
This is what my code generates: (The centermarks that are selected are the ones I don't want the code to generate). This is what I WANT the code to generate:
1) How do I distinguish whether a circle curve originated because of a hole or because of another cilindrical feature?
2) How to I identify the corresponding hidden lines in the other views so I can add a center line?
I've been using autocad 2012 student version and all the blocks I've used in my dwgs up until now, is blocks I created myself or blocks that I get from someone else. Now, I've been told that autocad comes with a library of blocks in plan and elevation view. How do I access them?
I have just installed C3D 2012 and when I show the menu bar, the only choice is Express which used to be the last tool in previous versions. What happened to File - Edit - View - Insert - Format, etc in the menu bar? I need to access them.
I've made a failed attempt to add the RIBBONCONTROL Named Views to the main Quick Access Toolbar. The Customize User Interface dialogue box (CUI) seems to allow me to drag the Named Views RIBBONCONTROL from the command list to Quick Access Toolbar 1. I don't see the "forbidden" icon and the blue insert bar shows up when I perform the drag operation.
However, I suspect there is some compatibility issue, because the command doesn't pop up when I release the mouse button at the end of the drag operation. Using command QUICKCUI and trying to drag Named Views RIBBONCONTROL directly to the Quick Access Toolbar (on screen) seems to be allowed likewise, but doesn't work also.
Using the regular View Manager Dialogue is not the kind of solution I'm looking for, because in the View Manager it takes at least twice as much mouse clicks to change to another view.
Any way to reach the desired customization? Should it be reported as a bug to Autodesk?
I have a problem wit Revit 2014 from BDS Premium. I don't have 3D default view icon in Quick Access Toolbar and I can not add it. I tried to right click on QAT and customize it but unfortunately 3D view is not in the list and it can't be added by righ clicking on the icon.
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
I started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013 Intel Xeon W3680 @ 3.33Ghz 12GB DDR3 RAM NVIDIA Quadro 2000 GPU Windows 7 Professinal 64-bit
I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013 Intel Xeon CPU 2.67 GHZ 8 Gb ram Windows 7 64 bit
I've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013 Windows 7 Professional 64-bit SP1 HP EliteBook 8470w Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz Memory: 16 GB AMD FirePro M2000 3D Connexion SpacePilot
I have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
Each time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
I have a detail view of a groove on a cylinder. I want to dimension a diameter in which I only see one side, the other side is not in the detail view.
From some posts I see that I should auto insert a centerline then dimension from centerline then choose options "dimension linear".
First when I try to auto insert centerlines it does not insert the centerline for me. Perhaps because my detail is smaller. If I make the field for the detail view larger it makes a centerline, but I dont want to do that. I have tried making a sketch of the other side and the centerline. When I dimension from here I do not have the right click option of dimension linear, instead only arrowhead options.
is it possible to create a detail view of an Iso view which is created with perspective camera? I tried it but it does not seem to let you have the option of selecting the connection line or detail view boundary?
I have a Crop View of a IAM and want/need a Projected View of the Crop View. When I select the Crop View as my base and then select try to create a Projected View, I get the whole IAM.
I guess one could use the Section View and eliminate all the items I don't need for my Base View.
IV2014 sp1.2 PDSU / Sim Mech 2014 / Win7-64 EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel 950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller) Nvidia GTX-690 Classified - 331.82 SpacePilot Pro 3.17.1, 6.17.7, 4.11
I am trying to write a small standalone app in C# that I can run when I have an assembly document open. I want the app to iterate through all the parts in the assembly and set the iproperties. I am having some trouble accessing the iproperties however.
I want (for example) to set the "TITLE" in the "DOCUMENT SUMMARY INFORMATION" to be a concatenation of the part number and the description separated by a " - ".how to access these properties.
My company has an excel program that extracts data from AutoCAD title blocks, processes it, turns it into printable spradsheet BOM's, and uploads the data to our ERP software. We're currently starting a transition form AutoCAD to Inventor. I've been asked to figure out how to make our excel program work with Inventor.
I'm hoping (but not expecting) to be able to change some lines around in the section that deals with extracting data and get it to work that way. I'm pretty sure of what needs to change, but I'm not so sure what it needs to change to. Does anyone know of any resources that someone who just started programming a couple weeks ago (me) could look at to learn more about how Inventor interfaces with VBA?
The other possible route I see is to export drawings from Inventor into AutoCAD.
The excel program reads block attributes. I've read that Inventor's version of attributes is prompted entry text, however, when I export Inventor drawings with prompted entry text lines that match the attribute lines from the old AutoCAD block they come in different. They're not editable inside of AutoCAD and the excel program doesn't see them. I haven't the slightest idea what's happening here.
A third way would be to use Inventor's iProperties, but there again, I don't know where to find information for the coding side.
I am using inventor 2013 and have a very large assembly consisting of many sub assemblies and I want to perform a FEA on it. I went to the tutorials to see where to find it and it said it is under "Environments" on my ribbon. However, I can't find it anywhere. How do I access it?
Is there any way you can access an AutoCAD file embedded in an IDW by using VBA?I have an IDW with about 100 sheets; it would like to control which file is embedded in each of the sheets.
The best would be to use linked files but I do not know how to make certain files visible on certain sheets.
For a while now whenever I open a new assembly the default is place from content centre, I use the drop-down and select place.
Today I needed place from content centre and it just doesn't come up.
It is loaded/automatic in the addins.
If I open my projects, in the bottom right corner where I would usually click to acess my installed libraries, I click but it does nothing!
I also noticed studio and BIM are greyed out, but I have started to play with Showcase so not really a problem. I need to set up a read/write library soon, so it's going to be a problem.
I was put in charge of modifying The commun library of our content center. Later today, i found out that one of our draftmen played around our library and modifying some of the preset that i setup.
My question is: What can be done to limit access (Putting it at Read-only) to certain library for certain users without limiting my own access?
Also, I'm pretty sure its not possible but ill ask anyway, is it possible to know who modify those library and when?
