AutoCAD Inventor :: Access To Save As Screen
Sep 9, 2013
I have a problem for code files in inventor, my intention is codify this files whit a personal code name.
I need to launch the "SAVE AS" changing the file name that I need, with the possibility of modifying it.
ThisApplication.CommandManager.ControlDefinitions.Item ("AppFileNewCmd"). Execute
Works smoothly and launches the open document window, but
ThisApplication.CommandManager.ControlDefinitions.Item ("AppFileSaveAsCmd"). Execute
does nothing, either fails. At the same time would need to know how to rename the file to display.
View 3 Replies
ADVERTISEMENT
Sep 9, 2013
I have a problem for code files in inventor, my intention is codify this files whit a personal code name.
I need to launch the "SAVE AS" changing the file name that I need, with the possibility of modifying it.
ThisApplication.CommandManager.ControlDefinitions.Item ("AppFileNewCmd"). Execute
Works smoothly and launches the open document window, but
ThisApplication.CommandManager.ControlDefinitions.Item ("AppFileSaveAsCmd"). Execute
does nothing, either fails. At the same time would need to know how to rename the file to display.
View 1 Replies
View Related
Apr 26, 2012
Just loaded 2013. Of course right away I get an error. "Internet access is required to access the Help" Well as you can see I have internet access.
View 4 Replies
View Related
Jun 3, 2013
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
View 4 Replies
View Related
Dec 30, 2013
I have downloaded the trial 2014 version. How i go about turning on the ribbons at the top of the screen or the quick access toolbar? I have tried going through the CUI menu but I can't seem to get it to work .
View 1 Replies
View Related
Jan 19, 2012
I would like to know if it is possible to save changes directly in the source data base file (Access) from Auto Cad Map.
I have a polyline draw (Footpath network). I have converted this draw to shapefile, and then I connect it to the Access Data Base via ODBC with a join.
The problem is that this shapefile is not definitive, and it is probably that some people will need to edit and create new features, and I don´t know how to do it.
Which would be the best option to do this? It would be better if I work with the dwg drawings and the data sources?.
View 3 Replies
View Related
Sep 22, 2012
the program. how do i get to the program? i click on edit, i click on arrange. i get nothing.
View 10 Replies
View Related
Jul 1, 2012
I've been using ulead vs 10 and now corel vs x4 pro to interface and record video from a microscope. I produced a DVD for microbe identification which has been purchased by 100s of amateur scientists and organic farmers. I record direct to hard drive via firewire with a Sony HD camcorder with a remote control 10X analog zoom; 37 mm lense. It is a lovely old camera.
1/ The recording controls are not accessible when in full screen mode which means I need to start recording, open the full screen then focus and start tracking my organisms with the microscope stage controls. To stop recording I need to go to small screen again first. Has this function been changed in the x5 version?
2/ When using the HD settings on camera and software, there is a delayed reaction to the computer so this makes tracking the microbes impossible. I doubt this is caused by lack of RAM I have 24 GB on a windows 7 64 bit.
3/ Occaisionally when I am observing and/or recording, the transmission freezes. I think this is likely something trying to run in the computer....Perhaps with creating a dedicated profile where I could stop any of this interference.
4/ I've been using an external USB 2.0 hard drive for storage but it is too slow. I've been thinking of a SATA external drive or USB 3. Does any huge advantages for the extra money to get a SATA external drive over USB 3.0?
View 2 Replies
View Related
Sep 30, 2013
I purchased Element 11 from Amazon and have the disk for my mac. I installed the program and then tried to register with Adobe. How to access the serial number screen?
View 1 Replies
View Related
Sep 14, 2013
I'm running Windows XP with Photoshop CS6. Since the "Save" button runs off the edge of my monitor, I can't click Save. I also can't move the dialogue box up far enough to get to it before running out of screen space. I tried just hitting the enter key, but nothing happened. I end up having to do a control-alt-delete to get out of Photoshop altogether.I've never had this problem before when I had CS2 or with the CS6 I have at work.Is there a way around this?
View 2 Replies
View Related
Jan 19, 2014
PSE 11 won't fit screen can't access slider bar at the side of application.
View 2 Replies
View Related
Jan 3, 2012
I keep getting the above error when working off of my xserve in photoshop. It is new in CS5 which we have recently upgraded to. Several people at my office are getting it. Sometimes it displays a random name with afp in front of it (I assume it is the temp name when photoshop is swapping out the new file for the old file.)
It only seems to happen with psd and psb files. I have write access to the volume in question and it doesn't matter if I am the only one accessing the folder or not. I can save as and it seems to work; but it does delete the file.
View 331 Replies
View Related
Sep 17, 2013
OS X - 10.8
CS6
Windows Server 2008 Share
This error is reported when attempting to save an illustrator file over an existing file with the same name. Yes saving it to the desktop and then copying it over the file on the shared drive works. This is not a solution for us. Full access has been granted to the user on the network share being used.
View 3 Replies
View Related
Apr 18, 2012
I am having this message display EVERY time I try and save something in my newly installed Photoshop (cs5) "Could not save "filename.jpg” because the file is locked or you do not have the necessary access privileges. Use the ‘Get Info’ command in the Finder to unlock the file or change permissions on the file or enclosing folders.
I have tried Uninstalling and reinstalling after resetting permissions, I have tried saving the file under a new name, I have tried adding a new admin... nothing seems to work and my Illustrator is working seamlessly!??
View 22 Replies
View Related
Jan 30, 2013
I'm getting the message when trying to save my homework: " message could not be save PS3-3.psd because write access was not granted."
View 2 Replies
View Related
Nov 15, 2013
Error of "Could not save (file name) because write access was not granted. The users are pulling the files from a Mountain Lion server. They all have readwrite access. If they try to save the file in the same directory they get that error but they can save it anywhere else on the sharepoint. If they save it in another directory then reopen it make a change and do a save as they can save it back to the original directory.
View 2 Replies
View Related
Jun 5, 2013
I have a drawing that when I am in a layout and run QSAVE (or if autosave fires), the screen "flashes". More specifically the layout disappears for a second and during this time, the entire screen is black (the animated GIF below plays a bit fast)
This only happens in one particular drawing, and any drawing this one is xrefed into. Before I recreate this drawing from scratch?
EDIT: If I turn off REGENAUTO, the flash does not happen. Still, something is weird about this drawing.
View 6 Replies
View Related
Nov 14, 2013
I connect my hard drive to compuuter, I open raw files in bridge load a file into ps, after which I would like to elaborate the new hard drive to save it, but it opens a window that says'' can not save the file because it was not granted write access.''
View 1 Replies
View Related
Apr 8, 2013
I previously organized and tagged a batch of raw photos using viewNX on my PC. The PC crashed and I am now trying to edit that same batch of photos with Elements 11 on my iMac. I am able to access the photos, but when I try to save my edits I receive the message, "Unable to save because write access was not granted." I am not on a networked computer, no one else has access to the photos, and the photos are not open in any other program. iMac and Elements 11 are new to me.
View 4 Replies
View Related
Oct 5, 2013
Just installed CS6 Extended, I cannot convert my NEF files and save them to psd. I get a message that says "cannot save because write access was not granted" I am using my new Mac. I never had this problem with my Windows CS5 extended.
View 6 Replies
View Related
Dec 31, 2013
I am having a catastrophic error in Inventor 2013.
When I attempt to save a drawing I have completed, I cannot save!
Can't save, save as or any other variation of save.
This is my issue every time I click save.
View 2 Replies
View Related
Aug 10, 2012
I am trying to write a small standalone app in C# that I can run when I have an assembly document open. I want the app to iterate through all the parts in the assembly and set the iproperties. I am having some trouble accessing the iproperties however.
I want (for example) to set the "TITLE" in the "DOCUMENT SUMMARY INFORMATION" to be a concatenation of the part number and the description separated by a " - ".how to access these properties.
View 1 Replies
View Related
Oct 7, 2011
My company has an excel program that extracts data from AutoCAD title blocks, processes it, turns it into printable spradsheet BOM's, and uploads the data to our ERP software. We're currently starting a transition form AutoCAD to Inventor. I've been asked to figure out how to make our excel program work with Inventor.
I'm hoping (but not expecting) to be able to change some lines around in the section that deals with extracting data and get it to work that way. I'm pretty sure of what needs to change, but I'm not so sure what it needs to change to. Does anyone know of any resources that someone who just started programming a couple weeks ago (me) could look at to learn more about how Inventor interfaces with VBA?
The other possible route I see is to export drawings from Inventor into AutoCAD.
The excel program reads block attributes. I've read that Inventor's version of attributes is prompted entry text, however, when I export Inventor drawings with prompted entry text lines that match the attribute lines from the old AutoCAD block they come in different. They're not editable inside of AutoCAD and the excel program doesn't see them. I haven't the slightest idea what's happening here.
A third way would be to use Inventor's iProperties, but there again, I don't know where to find information for the coding side.
View 5 Replies
View Related
Jun 18, 2012
I am using inventor 2013 and have a very large assembly consisting of many sub assemblies and I want to perform a FEA on it. I went to the tutorials to see where to find it and it said it is under "Environments" on my ribbon. However, I can't find it anywhere. How do I access it?
View 6 Replies
View Related
Sep 3, 2012
Is there any way you can access an AutoCAD file embedded in an IDW by using VBA?I have an IDW with about 100 sheets; it would like to control which file is embedded in each of the sheets.
The best would be to use linked files but I do not know how to make certain files visible on certain sheets.
View 8 Replies
View Related
Nov 21, 2013
For a while now whenever I open a new assembly the default is place from content centre, I use the drop-down and select place.
Today I needed place from content centre and it just doesn't come up.
It is loaded/automatic in the addins.
If I open my projects, in the bottom right corner where I would usually click to acess my installed libraries, I click but it does nothing!
I also noticed studio and BIM are greyed out, but I have started to play with Showcase so not really a problem. I need to set up a read/write library soon, so it's going to be a problem.
View 9 Replies
View Related
Nov 20, 2013
I was put in charge of modifying The commun library of our content center. Later today, i found out that one of our draftmen played around our library and modifying some of the preset that i setup.
My question is: What can be done to limit access (Putting it at Read-only) to certain library for certain users without limiting my own access?
Also, I'm pretty sure its not possible but ill ask anyway, is it possible to know who modify those library and when?
I'm using Vault
Inventor Version: 2014 SP1
Config : Intel (R) Xeon (R) CPU E5506 @ 2.13 GHz, 24 GB, 64bit win7
View 2 Replies
View Related
Mar 27, 2013
I have a model with two Workpoints and have to automatically create a dimension for these workpoints in a drawing.
The drawing has two views, a basic view and a section view.
The dimension of the workpoints has to be in the section view.
When doing this by hand, I would select the section view in the model browser, select the view's model, and then select the models centermarks and make them visible in only this view. After this I can select the CenterMarks for the dimension command.
When I look at the API, the workPoints are represented inside the drawing as CenterMarks, but the CenterMarks are children of the sheet and not children of a view !
And there are only two CenterMarks on the sheet, when I manually can select four (two in each of the views).
How can I programmatically access the centerMarks in a specified view ?
View 2 Replies
View Related
Aug 30, 2006
Is there a way to access AEC-data (connection properties etc) using the SDK?
View 1 Replies
View Related
Apr 22, 2013
I made a model that can be adjusted by using a ilogic form.
This alters the parameters in my "master" part & then changes my part in my assembly.
Problem: the form is located in my "master" part is there a way to access the form from my assembly?
Inventor 2013
View 9 Replies
View Related
Oct 25, 2004
how to "Print Screen" but not printed, just saved as an img?
View 2 Replies
View Related
