I have a CAD user when they try to print they get a Fatal Error
"FATAL ERROR: Unhandled Access Violation Writing 0x0034 Exception at 6ce5a6b4h"
What does that mean?
I Have an Error (( autocad 2013 fatal error unhandled access violation writing 0x0000 exception at 0h ))
View 1 Replies View RelatedEvery time I run AutoCAD 2014, I get this message:
Fatal Error: Unhandled Access Violation Writing 0x006c Exception At a5d45122h
It then shuts the program down, and asks if I want to send an error report to Autodesk, which I have done.
I'm running Windows 8 Pro.
I have just installed Autocad LT 2013 (licence bought yesterday) on a new Lenovo E330 laptop and the first time I'm trying to run Autocad I'm getting the following error: "fatal error: unhandled Access violation writing 0x0000 exception at 0h".
[URL]
1. regediting the DWORD Low to all 0000000, but it goes back to whetever value it was (i have tried with changing value and restarting, not restarting... etc. numerous combinations) and the error is still there
2. On one ocasion an autodesk employees on that thread informed the user that the generated error report was pointing towards a usb display adapter, and as I was using an external replicator (USB) I decided to try with the laptop running by itself on it's own graphics, that didn't change the error message. Next step update the HD4000 driver to the latest from intel, but still the same fatal error.
On top of the above i have also completly unistalled Autocad and all related products, performed new installation with same fatal error again after the installation. I have tried different comatibility modes when running the software and i have tried running as administrator (although I am logged as administrator anyway)
We're running Autodesk Product Design Suite Premium 2013 on computers specficially designed by chaps so they meet the required spec (Windows 7).For two months we have been running this product without any problem however over the weekend we moved offices and the computers have been "poked about" by the IT support team as they moved servers / changed admin rights / drank coffee. This problem however is only affecting the one computer - the other is running fine so I assume they've not broken anything.
It ran on Tuesday til Thursday without any problems however this morning AutoCAD is having an abortion hissy fit (fifth crash in two hours) and I am getting:
"Fatal Error: unhandled access violation 0xffffffff exception at e47fde0ah" crashing the system while moving lines on a very simple AutoCAD 2D drawing (500kb). This
I've turned Aero Theme off and am running no other computer programmes (CPU sits at 13% when it crashes and doesn't spike).
I recently installed AutoCAD 2013 onto my computer which has windows 7 64 bit operating system. After completing installation, I tried to open AutoCAD and immediately I recieved this error, "Fatal error: Unhandled Access violation Reading 0xffffffff Exception at 70cbe8e1h.
View 9 Replies View RelatedI have continuously been receiving Fatal Error codes following with my AutoCAD to crash by just saving my drawing.
FATAL ERROR: Unhandled Access Violation Reading 0x53fefc14 Exception at ed091e2bh.
FATAL ERROR: Unhandled Access Violation Reading 0x9ffd3a31 Exception at f797dcf9h.
Also, i having Runtime Error. R6025 - Pure Virtual function call.
I have repaired, uninstalled and reinstalled AutoCAD. I use Windows 7 64 bit. Everything is up to date.
I'm running AutoCad LT 2012, this message appears right after the startup loading page and its always different with the exception of 3544 at the end of every code. I've tried a repair and a reinstall but this keeps popping up.
View 1 Replies View RelatedMy AutoCAD LT 2004 is crashing soon after opening with the message:
fatal error Unhandled Access violation Reading 0x0054 Exception at 72c214h
My AutoCAD is crashing everytime I try recover a site plan from a GC.
View 4 Replies View RelatedThere are specific files in which will cause this fatal error to come up:
"FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at 5c88cd29h"
I am using AutoCAD 2010. I am able to open the file in other computers in the office, even in another AutoCAD 2010, but it consistently gives me this error on my machine. I've tried purging the file and recovering it, but nothing seems to work.
I am getting a fatal error message "Unhandled Access Violation Reading 0x0038 Exception at e9a85402h". I was working on a drawing Friday afternnon and the error popped up and crashed Civil 3d. I could open Civil 3d, but when I tried to open the drawing in question, the error would occur and crash Civil 3d. I started a new drawing and inserted the old drawing as a block. That had been working all morning, but all of a sudden the same error started to occur again. What is the error?
View 2 Replies View RelatedWe are getting the following error on one of our machines: FATAL ERROR: Unhandled Access Violation Writing 0x7f83f993 Exception at 49206f1ch. It is happening when a file created with AutoCAD LT 2013 is opened using AutoCAD Mechanical 2008. The file was saved as a 2007 file in AutoCAD LT 2013, so that it would work on our older computers. How can I fix this?
View 4 Replies View Relatedso i've been getting this pop up window everytime i try to open autocad today. yesterday night i was using it fine.now whenever i try to open the program, it says "fatal error unhandled access violation reading b14c4b12h"..i sent an error report to autodesk and they suggested a patch. and after restarting my pc its still not working.
i have win8.1 with autocad2014.it pisses me off koz i have school assignments to do and it's not working
I'm using Autocad 2013, when I open my existing files this appear and program shut down
“Fatal Error: Unhandled Access Violation Reading 0xc075ddf8 Exception at e6197bd9h”
Attached herewith is a screenshot
I checked almost everywhere but there is no error i get .. Fatal Error : Unhandled Access Violation Reading 0xffffffff Expection at faad0004h .. I removed all the files and installed again but did not work ..
View 7 Replies View RelatedToday I receive FATAL ERROR unhandled access violation writing 0xee300200 exception at e0093851h, where I start to investigate?
View 2 Replies View RelatedI´m having this error Error fatal Unhandled access violation reading 0x258a000 Exception at 1318228h and then Insufficient memory - shutting down.
View 5 Replies View RelatedAutocad LT 2013
Fatal Error: Unhandled Access Violation Reading 0xffffffff Exception e6d7a0adh. This error only occurs while I am using dimension commands. This is happening on a daily basis, no resolution from AutoCad. Error reports sent each time it happens. This particular failure never happened with 2012.
I have C3D2009 with service packs 1,2 and 3 installed in my computer with Windows XP operating system.
I am having fatal error when I try to export a dwg file to 2007 DXF file. I receive the following message:
" Fatal Error: Unhandled Access violation reading Oxfcf064fd Exception at fcf064fdh"
Attached, please find the dwg file I am trying to convert to 2007 DXf file.
When opening the navigation bar, the error message: unhandled exception error C0000005 (Access Violation Reading 0x0144) at address 5E03F5BFh or 5DFAF5BFh. What does this mean? The program (AutoCAD 2012 student version German 64 Bit) crashes as well when creating a new file and open the existing files in the registry file Karter. I have a Toshiba Satellite C660-29V with "IntelCore i3" processor and Windows 7- 64 Bit. Graphics Controller: Intel (R) HD Graphics Core (i3). Driver: Driver Version: 8.15.10.2189 Driver Date: 28.07.2010
How can I fix it so that AutoCAD 2012 running properly?
Having a problem with AutoCAD Civil 3D 2012 which keeps crashing with a fatal error on a Win7 Pro (64) machine. Was able to get the user to make a screenshot on the most recent occasion, and the error was as follows:
FATAL ERROR: Unhandled Access Violation Reading 0x0014 Exception at f5a69bb9h.
Having looked through your forums I see that this may be related to the video card, which is a Nvida Quadro 5000. I've already updated the driver to the Quadro Performance Driver, v320.78, but the problem continues.
Is there a different partner certified driver that I should be using (can't seem to find any for Civil 3D) , or is the issue related to something else?
I'm recieving this error when I go to paper space and attempt to set my profile view. I am working for a consultant using a required template from the city and when I open just the main template I recieved a message about 10 errors, do I want to recover, so I do and it finds no errors but I continually get the message. I'm thinking that fatal error message has something to do with the 10 errors. what those fatal error codes are in the subject line?
View 1 Replies View RelatedRunning Civil CD 2012 on Windows 7. All service packs are up to date. After creating plan over profile sheets, I click to open a Layout tab to view a sheet, and get this error.
View 9 Replies View Relatedtoday i had the third crash of Acad 2013 since i have installed it on my pc (I7-2600k 64 bit, 16g ram 250gb ssd /2gb hard drive, nvidia quadro 4000 graphics card) and whenever i try a and start Acad it comes up with "fatal error unhandled exception etc etc) after searching the web all i could do was reset to autocad defaults from the start menu but in turn i lost all my settings menus etc. is it my PC or software?
View 5 Replies View RelatedWhen I open my particular file and begin working AutoCad crashes. Then posts this " fatal error: unhandled e06d7363h Exception at fe07cacdh" then does "Autocad cannot continue. You can attempt to save changes into the following file up to the start of the last command: ....."
View 1 Replies View RelatedEvery time I try to open my baloon notification settings AutoCAd 2013 Architecture crashes and gives me this error: Fatal Error: Unhandled e0434352h Exception at fd51940dh. I find this particularly odd because I changed my settings once on this machine not too long ago but it's not working now. I'm going to:
-Options
---System tab
-----InfoCenter section
-------Baloon Notifications
System Specs:
Dell Precision T3600
Windos 7 64-bit
Intel(R) Xeon(R) CPU E5-1607 0 @ 3.00GHz
16.0 GB RAM
AMD FirePro V4900 (FireGL V) Graphics Adapter (8923 MB)
We got the FATAL ERROR: Unhandled c000417h Exception at 6cbf0468h after opening some drawings..
it is an win7 Professional x64 sp1 workstation.
User say that when open a DXF, they receieve the error
AutoCad Error Aborting
FATAL ERROR: Unhandled e0434352h Exception at fd91ac3dh
System
Dell T3500
Windows 7 x64
8gb of DDR3
2GB nVidia Quadro 4000
I have this Acad plugin (C#), where I simply create a Ribbon, Button on it that executes a Command. Windows 7, AutoCAD 2013 all running x64. Used the ObjectARX x64 Libraries for my references. In my environment, everything works just fine, on my clients workstations... it shows 'Unhandled access violation reading 0x0000 exception'
Since client installed AutoCAD 2012 and then 2013, I tried a Repair, to no result. Have verified all references, put all ObjectARX references, just to make sure, put debug lines in the code. It crashes at first line:
Autodesk.Windows.RibbonControl ribbonControl = Autodesk.Windows.ComponentManager.Ribbon;
All other Commands seem to run just fine.
I am getting this message when I try to open a drawing by 'file, open' or any 'mapping or searching' way other than opening a drawing listed in history.....there is nothing listed when I 'search' ...I can't see my c drive, d drive, my documents, etc just all blank and then i get the fatal error which crashes acad lt.
View 7 Replies View Related
