AutoCAD Map 3D :: Raster Design Object Enabler For 2011?
Sep 15, 2011I am not seeing a oe for raster design for Map 3D 2011. We need to attach ECW ortho images.
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Raster Design Object Enabler For 2011 64 Bit?
Mar 19, 2012I've been trying to get the Raster Design Object Enabler for Civil 3D 2011 64 Bit to install, but every time I run the exe it says there is no target application to be found, even though Civil 3D 2011 64 Bit is quite clearly installed on the machine.
View 8 Replies View RelatedAutoCAD LT :: 2011 Mep Object Enabler Not Installing
Sep 27, 2010I am having trouble installing the "AutoCAD Architecture-MEP Object Enabler for AutoCAD LT." Whenever I try to install it, I immediately get a screen that says, "Setup was unable to detect any target applications for AutoCAD Architecture-MEP Oblject Enabler for AutoCAD LT." I have tried restarting the computer, running the install program with LT on and off, etc.
View 9 Replies View RelatedAutoCad :: Inserting TIFF Image With Raster Design 2011
Aug 9, 2011inserting a Tiff image into a dwg file with Raster Design 2011. I have a image scanned at 400dpi and the image is a good quality image, some of the text is small be legible. When I insert the image with the imageattch command the image seems to gain pixels therefore causing some text to become unreadable. I've used the bitonal filter but then I lose some resolution. Is it normal for the TIFF image to appear more dense when brought into an Autocad drawing? If so is there a way to adjust the image to look more like the scan?
View 1 Replies View RelatedAutoCAD Civil 3D :: Raster Design - Commands For Raster Tools Not Working
May 24, 2012Working in 2013 Raster Design. The commands for raster tools are not working. When attempting to insert an image the following message appears:
c:program filesautodeskautocad raster design 2013aeciibui56.arx cannot find a dll or other file that it needs. Unknown command "IINSERT". Press F1 for help.
Similar messages appear when trying other commands located within the Raster Tools tab.
AutoCad :: Object Enabler Doesn't Work
Nov 13, 2013We have AutoCAD 2014 and 2012 currently in our office. We have a civil file that works perfectly fine with 2014 (we usually save all files down to 2010 so all our consultants can use them). When we open it in 2012 the object enabler does not seem to work only showing empty boxes with AceeLand90 text in the lower left hand corner. The civil object enabler on 2012 is up to date and the drawing was saved down to 2010. Not sure what I am missing and why it doesn't wort to have the Acee Entities shown in 2012.
View 6 Replies View RelatedAutoCAD Civil 3D :: Object Enabler Won't Install For 2012
Nov 9, 2012I've been having issues recently installing Object Enabler for AutoCAD Civil 3D 2012 on a few machines. I downloaded the installer from the AutoDesk website, but when running, it comes up and says it can't find any install of Civil 3D 2012..
Currently have AutoCAD Civil 3D 2010 and it's object enabler installed... Also have AutoCAD Civil 3D 2012 installed but can't get the OE to install for it. Running the 64bit shows nothing to install to, and the 32 bit installation only shows an option for "Language Pack".
AutoCAD 2013 :: Object Enabler Doesn't Not Work?
Apr 10, 2013I am using Autocad 2013 on a 64bit PC.
I saved and run the Civil OE 64Bit. All the items shown have been selected and installed.
I can only see squares when I open a drawings that comes from the civil engineers.
AutoCAD Visual LISP / AutoLISP :: Object Enabler - Any Way To Temporary Disable It
Feb 28, 2013I have an Object Enabler question... is there anyway to temporily disable them - but without Programs And Features > Uninstall?
I know that most enablers add an entry in Appload. What about a button that unloads the enabler if its name can be determined?
AutoCAD 2013 :: 2014 Object Enabler Causes Fatal Error On Etransmit And File Conversion
Aug 16, 2013I recently installed Autocad 2014 with Carlson Survey 2014. When I use Etransmit or file conversion i get a Fatal Error. when i uninstall the civil 3d object enabler, the problem goes away, but i need the object enabler and i need to convert files. Is this not a major issue that Autodesk would consider important enough to address, or is the object enabler minor in comparison to other issues?
View 4 Replies View RelatedAutoCAD 2010 :: Raster Design Photo Transformations
Jul 17, 2013Any way to transform/rubbersheet a photo/raster so it sticks to a wall i.e. vertically and not just doing it 2D. Trying to digitise photo's taken of walls to work in a 3d model.
View 3 Replies View RelatedAutoCAD 2013 :: Unable To Run Any Of Raster Design Commands
Nov 6, 2012I have one user with AutoCAD Design Suite 2013. She is unable to run any of the Raster design commands.The Ribbon is loaded but commands are not working (unknown command).
AutoCAD as such runs fine.
AutoCAD VB :: Client Menus Utilizing Raster Design
Jun 24, 2011I've been trying to update a client menu and I've gotten most things figured out. They have a fairly elaborate routine set up to make sure our drawings work with their document control system as well as raster design. We are using AutoCAD 2011 and the menu's were meant for 2008.
Everything seems to run well except at this sub module and every time I load a raster drawing with a TIF the routine error's out at the line in Red below. I've tried everything I can think of to keep the routine running, and I want to refrain from just remarking it out, which seems to do the trick, but I do not want to do that unless it's for some other purpose. I just need to get their menus to work on newer versions of AutoCAD.
Private Sub AcadApp_EndOpen(ByVal FileName As String)
Dim sPathPart As String
Dim sFilePart As String
Dim sExtPart As String
Dim lResult As Long
Dim vResult As Variant
Dim bFoundCO As Boolean
[Code] ......
AutoCAD 2010 :: Attaching Raster Permanently To Design File
Mar 28, 2013Is there a way to permanently attach a raster to a .dwg? I want to publish a large set of drawings on our Intranet and some have rasters attached.
I don't need to worry about links to references and how to post them so as not to break the link.
AutoCAD Civil 3D :: Raster Design Not Working With 2012 After Update 2.1
Aug 23, 2012After installing Update 2.1 for Civil 3D, Raster doesn't seem to be working. When I go to use a Raster function, I get
FATAL ERROR: Unhandled Access Violation Reading 0x01b8 Exception at 6e545df5h.
I've tried repairing and re-installing Raster and nothing has changed.
AutoCAD Visual LISP / AutoLISP :: Append Directories To SFSP With Raster Design Loaded
Oct 16, 2013I am in the process of creating 2 lisp routines, one that loads Support file search paths on the network and one that adds support file search path locally. Each routine will be run depending on the ability of ACAD to find a file on the server. I noticed that when I add the new directories the default AutoCAD folders get replaced. I researched this and found that using the SETENV and ACAD I can include the default support paths.
The issue I am running into is that not all default folders are being added to AutoCAD when I used the ACAD variable. A plugin folder under Program Data is listed in the original install, but it is not listed when I add my directories and used the ACAD variable to add the default directories. The same thing happens when raster design is installed. The help folder and the install directory for raster are not carried over when using the ACAD variable.
I am attaching the coding for the lisp routine adding server paths. Is there some syntax I can add to tell it to append to the list instead of replacing the SFSP list?
(vl-load-com)
(setq files (vla-get-files
(vla-get-preferences (vlax-get-acad-object))
)
)
(setq SERVNM (getenv "servername"))
(setq SLSERV (STRCAT "\\" SERVNM))
[code].........
AutoCAD 2013 :: Prosteel Object Enabler For 2013
Sep 19, 2012when the Prosteel Object Enabler for AutoCAD 2013 will be available.
View 4 Replies View RelatedAutoCAD 2013 :: 2013 Object Enabler For SID File
Mar 20, 2013Trying to utilize a .sid file within Standard AutoCAD 2013, all suggestions point to an Object Enabler but notice that for 2013 all are for Civil 3D, Plant...
Is there an object enabler for Standard 2013?
Photoshop :: Render 3D Object From Raster And Smart Object
Feb 20, 2013I render 3d object from raster and smart object (extrusion) Each time i do the edge where the extrusion meets the front inflation material is slightly distorted. Should be a smooth line.
View 20 Replies View RelatedAutoCAD 2013 :: Raster Image / OLE Object Exploding?
Oct 20, 2012Insert a Raster Image or an OLE object (like a selection from a XLS worksheet).
Explode the Raster Image/OLE object.
=> the Raster Image/OLE dissapears and the frame remains (LINE objects).
I think that these types of entities should not allow exploding.
Illustrator Scripting :: How To Raster Object
Aug 16, 2011How to Raster a object in illustrator with scripting?
View 7 Replies View RelatedAutoCAD .NET :: Call COM Object From 2011?
Jul 22, 2012I tried to call COM object created by C# from other C# module.
I did:
1. Create simple COM object by C#
2. Register it
3. Try to call this COM from other C# console application - it works fine
4. Create simple AutoCad module by C# with IExtensionApplication
5. Try to call this module from AutoCAD - it works
6. In Initialize() method I wrote:
Type myClassAdapterType = Type.GetTypeFromProgID("CoreAdapter.CoreAdapterClass");
acDoc.Editor.WriteMessage("Type is OK: {0}", myClassAdapterType.FullName);
object myClassAdapterInstance = Activator.CreateInstance(myClassAdapterType);
acDoc.Editor.WriteMessage("Created");
6. Open AutoCAD again
7. Load my module
8. I saw "Type is OK" (becase it was registered in registry)
But I can't create instance.
AutoCAD VB :: Create Object For 2011 / 2012?
Jul 19, 2011i'm using the following code (generic) to interface with AutoCAD; not including the version because my company upgrades every year...
Private AutoCAD_Instance As Object
AutoCAD_Instance = CreateObject("AutoCAD.Application")
When I try to run this, I get an error 'Unable To Create ActiveX Component'...
AutoCAD Map 3D :: 2011 Unable To Select Object?
Feb 24, 2011When I select an object to move I am unable to snap to the grips of the object or any other object close or any intersections. I have double and triple checked my osnap settings. Also, If I select a circle to move I am unable to select the center of the circle through additional osnap settings. One last issue, If I select an object and do a copy with base point command, I am unable to select a definitive base point. No grips or intersections show up.
My co-workers are able to do these functions but I am not.
AutoCad :: Object Snap Toolbar In 2011 LT?
May 9, 2011I am looking for the perpendicular function specifically. However, at this point I can not find the tool bar for any of the snap functions.
View 3 Replies View RelatedAutoCAD 2010 :: 2011 Maps 3D X32 No Null Object?
Apr 12, 2012A co-worker tells me when he opens a drawing then minimizes it and then opens a new drawing to fiddle around with, when he closes it and doesn't save and returns to the first drawing, when he runs commands he gets "No Null Object" errors. He can click OK or whatever on the error messages and continue, but they constantly fly in his face.
He's running AutoCAD 2011 Maps 3D x32 on Windows 7 x64.
AutoCAD Inventor :: 2011 Add-In - How To Release Document Object Correctly
Jan 26, 2012I've created a Inventor 2011 Add-In using VB.Net with VS2008.
This add-in does all kinds of things, but it will not release some documents.
Well I don't know that for shure but it looks like that.
We use Productstream Pro and when changing state of a document it says the document is in use while there are no documents visibly open in Inventor. This only occures when I use my add-in.
Exact steps: Load drawing document from PSPPerform action with add-in which gets a custom iProperty from the Part file used on the Drawing and fills the display name of the Drawing with itSave the drawingClose the drawingIn PSP try to change state of the part file used on the drawingGet message from PSP stating the part is in use
In my code I've tried some things to prevent this behavior but non of them work.
I've tried:
Setting unused objects to "= Nothing"Releasing objects using "Marshal.ReleaseComObject(obj)"Calling "m_inventorApplication.CloseAllUnreferencedDocs()" and "System.GC.Collect()" on the "m_appEvents_OnTerminateDocument" event.
GIMP :: Detection Of Object Boundaries In Raster Image And Automatic Creation Of Paths
Jul 2, 2012GIMP script/plugin for detection of object boundaries in a raster image and automatic creation of corresponding paths?
View 2 Replies View RelatedAutoCAD Inventor :: Feature Recognition Enabler
Jul 10, 2012I've upgraded to Inventor 2013, removed 2012 and I want to install Feature Recognition enabler for 2013. It wont install because it says an older version of the add-in exisits. Control Panel won't uninstall it becasure it says Inventor not installed. any thoughts on how to remove the old version of feature recognition?
View 5 Replies View RelatedAutoCAD Inventor :: Copy Of Mesh Enabler Add On
Nov 29, 2013where I can find and download a copy of Mesh Enabler add on for Inventor 2011?
Every link I try brings me to the same page to download it for 2013.
AutoCAD 2010 :: Enabler For LT To View Plant 3D Images
Jun 7, 2012Is there an enabler to be able to view Plan 3D 2011 images in AutoCAD LT 2011, currently when opening images the lines are showing as block,
View 4 Replies View Related