AutoCAD Civil 3D :: Raster Design Object Enabler For 2011 64 Bit?
Mar 19, 2012
I've been trying to get the Raster Design Object Enabler for Civil 3D 2011 64 Bit to install, but every time I run the exe it says there is no target application to be found, even though Civil 3D 2011 64 Bit is quite clearly installed on the machine.
I am having trouble installing the "AutoCAD Architecture-MEP Object Enabler for AutoCAD LT." Whenever I try to install it, I immediately get a screen that says, "Setup was unable to detect any target applications for AutoCAD Architecture-MEP Oblject Enabler for AutoCAD LT." I have tried restarting the computer, running the install program with LT on and off, etc.
inserting a Tiff image into a dwg file with Raster Design 2011. I have a image scanned at 400dpi and the image is a good quality image, some of the text is small be legible. When I insert the image with the imageattch command the image seems to gain pixels therefore causing some text to become unreadable. I've used the bitonal filter but then I lose some resolution. Is it normal for the TIFF image to appear more dense when brought into an Autocad drawing? If so is there a way to adjust the image to look more like the scan?
Working in 2013 Raster Design. The commands for raster tools are not working. When attempting to insert an image the following message appears:
c:program filesautodeskautocad raster design 2013aeciibui56.arx cannot find a dll or other file that it needs. Unknown command "IINSERT". Press F1 for help.
Similar messages appear when trying other commands located within the Raster Tools tab.
I've been having issues recently installing Object Enabler for AutoCAD Civil 3D 2012 on a few machines. I downloaded the installer from the AutoDesk website, but when running, it comes up and says it can't find any install of Civil 3D 2012..
Currently have AutoCAD Civil 3D 2010 and it's object enabler installed... Also have AutoCAD Civil 3D 2012 installed but can't get the OE to install for it. Running the 64bit shows nothing to install to, and the 32 bit installation only shows an option for "Language Pack".
We have AutoCAD 2014 and 2012 currently in our office. We have a civil file that works perfectly fine with 2014 (we usually save all files down to 2010 so all our consultants can use them). When we open it in 2012 the object enabler does not seem to work only showing empty boxes with AceeLand90 text in the lower left hand corner. The civil object enabler on 2012 is up to date and the drawing was saved down to 2010. Not sure what I am missing and why it doesn't wort to have the Acee Entities shown in 2012.
I recently installed Autocad 2014 with Carlson Survey 2014. When I use Etransmit or file conversion i get a Fatal Error. when i uninstall the civil 3d object enabler, the problem goes away, but i need the object enabler and i need to convert files. Is this not a major issue that Autodesk would consider important enough to address, or is the object enabler minor in comparison to other issues?
Any way to transform/rubbersheet a photo/raster so it sticks to a wall i.e. vertically and not just doing it 2D. Trying to digitise photo's taken of walls to work in a 3d model.
I have one user with AutoCAD Design Suite 2013. She is unable to run any of the Raster design commands.The Ribbon is loaded but commands are not working (unknown command).
I've been trying to update a client menu and I've gotten most things figured out. They have a fairly elaborate routine set up to make sure our drawings work with their document control system as well as raster design. We are using AutoCAD 2011 and the menu's were meant for 2008.
Everything seems to run well except at this sub module and every time I load a raster drawing with a TIF the routine error's out at the line in Red below. I've tried everything I can think of to keep the routine running, and I want to refrain from just remarking it out, which seems to do the trick, but I do not want to do that unless it's for some other purpose. I just need to get their menus to work on newer versions of AutoCAD.
Private Sub AcadApp_EndOpen(ByVal FileName As String)
Dim sPathPart As String Dim sFilePart As String Dim sExtPart As String Dim lResult As Long Dim vResult As Variant Dim bFoundCO As Boolean
I am in the process of creating 2 lisp routines, one that loads Support file search paths on the network and one that adds support file search path locally. Each routine will be run depending on the ability of ACAD to find a file on the server. I noticed that when I add the new directories the default AutoCAD folders get replaced. I researched this and found that using the SETENV and ACAD I can include the default support paths.
The issue I am running into is that not all default folders are being added to AutoCAD when I used the ACAD variable. A plugin folder under Program Data is listed in the original install, but it is not listed when I add my directories and used the ACAD variable to add the default directories. The same thing happens when raster design is installed. The help folder and the install directory for raster are not carried over when using the ACAD variable.
I am attaching the coding for the lisp routine adding server paths. Is there some syntax I can add to tell it to append to the list instead of replacing the SFSP list?
Trying to utilize a .sid file within Standard AutoCAD 2013, all suggestions point to an Object Enabler but notice that for 2013 all are for Civil 3D, Plant...
I render 3d object from raster and smart object (extrusion) Each time i do the edge where the extrusion meets the front inflation material is slightly distorted. Should be a smooth line.
When I select an object to move I am unable to snap to the grips of the object or any other object close or any intersections. I have double and triple checked my osnap settings. Also, If I select a circle to move I am unable to select the center of the circle through additional osnap settings. One last issue, If I select an object and do a copy with base point command, I am unable to select a definitive base point. No grips or intersections show up.
My co-workers are able to do these functions but I am not.
A co-worker tells me when he opens a drawing then minimizes it and then opens a new drawing to fiddle around with, when he closes it and doesn't save and returns to the first drawing, when he runs commands he gets "No Null Object" errors. He can click OK or whatever on the error messages and continue, but they constantly fly in his face.
He's running AutoCAD 2011 Maps 3D x32 on Windows 7 x64.
Trying to connect to raster data through FDO Provider , 3D Map for Geospatial, raster formats are Drg, MrSid, Tiff and ECW, all formats load up but do not display, using Autocad Civil 3D 2008.
Heard complaints about how XREF's with raster images take forever to load and unload? Any time you select the XREF in the Xref Manager the images process, whether they are turned on or off. When did this behavior start?
I created a 3D raster surface from point cloud using create from point cloud tool ( Planning and analysis workspace, create tab). Now I would like to cut/slice this surface to be able to offset one part related to the other.
How to do it? I tried with the slice tool but I can only select the object and after nothing happens.
I've created a Inventor 2011 Add-In using VB.Net with VS2008.
This add-in does all kinds of things, but it will not release some documents.
Well I don't know that for shure but it looks like that.
We use Productstream Pro and when changing state of a document it says the document is in use while there are no documents visibly open in Inventor. This only occures when I use my add-in.
Exact steps: Load drawing document from PSPPerform action with add-in which gets a custom iProperty from the Part file used on the Drawing and fills the display name of the Drawing with itSave the drawingClose the drawingIn PSP try to change state of the part file used on the drawingGet message from PSP stating the part is in use
In my code I've tried some things to prevent this behavior but non of them work.
I've tried: Setting unused objects to "= Nothing"Releasing objects using "Marshal.ReleaseComObject(obj)"Calling "m_inventorApplication.CloseAllUnreferencedDocs()" and "System.GC.Collect()" on the "m_appEvents_OnTerminateDocument" event.
I'm using C3D 2013 on a 64 bit windows 7 machine. I have basejump loaded, and when I first installed it there would be a "Raster" tab in the ribbon that would allow me to resample, etc. That tab is now gone. How to get it back?
I used to click on a point to select it and a new tab would show up in the ribbon to list points, edit points, etc. That doesn't come up anymore either.