just tested. no good. don't do it.
just a friendly warning. stick with 2013+win8
or
2012 + win7.
crashes all the time editing alignment/profile. (better). and corridors. (very bad).
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
I have windows 8 on new asus laptop N56VZ. Installed civil 3d 2013 with no problems (i see some people have problems with installing) but it doesn't work normal. It crashes every time i try to edit an alignment, old or new.
I had windows 8 beta on an older asus laptop and civil 3d work there normally. Then I upgraded it to win 8 and it started crashing like described.Today i bought that new asus n56vz with windows 8 and it is crashing.
I just installed Civil 3D 2012 64 bit on a new computer running Windows 8. It starts up fine, but when I pull up a drawing, about 1 or 2 minutes later, the program shuts down and I have to restart Civil 3D. I've pulled up several different drawings from different sources, and it does the same thing. First, a window pops up for a split second, and I can't read the contents of the window. Then, I get the window that says Civil 3D is shutting down.
View 9 Replies View RelatedPros and cons of using two instances versus two windows? I ahve alignments and corridors in seperate files so I am always using both. Does two instances utilize multi-core processors better?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
Our Cad person recently switched from a dying windows machine to an iMac. I know you can do the liscene transfer (the windows pc is being put down) however I can't find anyway to get the LT 2012 Mac download. (The disc is a windows only) I thought about just getting the trial but only 2013 is offered and we don't plan on updating as of yet.
View 3 Replies View RelatedEver tried filleting a model and noticed this annoying behavior. You want to type in 0.25... So you typed 0 first, then typed point, then 2. You are now going to type the remaining part 5. You notice that 5 replaces all the numbers in the dialog box. All of a sudden now inventor thinks the fillet value is 5.
Bad part is that this is a huge casting model and 5 is too big and inventor is now frozen.
Inventor Professional 2013
Vault Collaboration 2013
I've downloaded it several times, but it seems it just will not install.
heres the log:
2012/10/11:15:59:33 midnit_angel13 ANGEL === Setup started on ANGEL by midnit_angel13 ===
2012/10/11:15:59:33 midnit_angel13 ANGEL Launch
2012/10/11:15:59:47 midnit_angel13 ANGEL === Setup ended ===
[Code].....
I just downloaded the windows 8 preview and I’m trying to download AutoCAD 2012 put I keep getting an error during the instillation so it’s not downloading.
View 7 Replies View RelatedI have 3D drawing. I put camera's in several places and situations. In viewports I choosed a camera in every viewport. They work nice so long the drawing is open. When I close the drawing after saving it ofcourse. When I open it again , the viewports jump to SOUTH-EAST. and I have to rearrange the view of the cammera again. Although I used the command UCSFOLLOW to solve this, but it did not work.
PS. that happens only in the viewports which based on camera's. The views in other viewports which are not based on camer's, stay without chaning or jumping.
I have a server running Windows 2003 and I need to have limited users be able to run Autocad LT 2012. Every time it runs, Windows Installer pops up for a very short time and AutoCAD never actually runs. I believe that the pop up is for the English Language Pack, but I cannot be positive about it. I have already read the KB article on running as a restricted user, URL.... and the environment does not prevent the user from accessing any of the registry and file locations specified. I have tried many things to get this to work, but nothing seems to do it. One notable thing that I tried was to make the user an admin, run the program, then remove them from the admins group, but as soon as I remove them, they are no longer able to run it.
View 3 Replies View RelatedMy brand spanking new Acad2012 cannot copy anything to the windows clipboard...it freezes as soon as I hit enter after selecting the objects I want to copy. The only solution is to taskmanager and kill it.
I've had to go back to using my old AcadLT 2002 in my WindowsXP VM.
Basically my new Sing$2000 SW is useless unless I can copy blocks form one drawing to another.
I've applied this patch: [URL]
I am getting a message:
"the system cannot open the device or file specified".
C: emp\_AIA9B6.tmpx86en-uscomponentsadr2012setupdesignreview2012.msi
i then search *.msi file and got another message:
microsoft visual C++ 2010 redistributed is required to continue w/ installation.....
I have admin privs, running net 4, sufficient memory
Which one of these methods insures that there will be no error, or bug on closing the sketch profile in all the future versions of inventor? One is simpler than the other (no line on top of line, no need to make extra construction line). I'm fine either way, i just want to know which one is the SAFEST FOR LONG TERM PART FILE STABILITY.
View 4 Replies View RelatedLooks like the format is not forwarded correctly to the printer when printing A3, it comes out as A4. If we change paper format in printer properties to A3 it works fine.
View 3 Replies View RelatedWhen I open a .dwg file from a saved location auto cad crashes about 35% of the way through loading. I did not have this problem when I was running Windowws XP but now I am running Windows 7.
View 6 Replies View RelatedIhave windows 8 consumer preview and i installed autocad 2012 but when i open autocad 2012, ribbon dont appear, when i write the command ribbon but appear a message like this " Unhandled exception has ocurred in a component in your application. If you click continue, the application will ignore this error anda attempt to continue.
Common Languaje Runtime detected an invalid program"
In Attachment , i put the image of the problem....
I have found that with windows 7 64 bit (not sure about other versions) when inventor 2012 pro is installed, it causes windows safe mode to reboot at logon screen after like 3-4 seconds. I have found the cause to be a window service that it inventor installs called "Autodesk Moldflow Inventor Tool Suite Integration 2012 Job Manager". I disable this service via "msconfig" tool and windows safe mode works ok.
View 9 Replies View RelatedI bought a new laptop Asus k73SV-TY081V version. When i'm working with autoCAD 2012, my videocard crashes and i get a message: "Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered"
View 9 Replies View RelatedI just bought a new pc with windows 7 home premium 64-bit,but I run the program(3ds max design 2012 64-bit) and though it is installed correctly,it doesn't start, it freezes when its starting, any error messages appears.
Is it made to work only with windows 7 professional?(I mean the 7 editions? )can I upgrade and then the program will work fine?
Revit 2011 text editing
How do I keep the formatting stable in the text editing. I have columns separated by tabs. Every time I click to edit the text Revit re-arranges the paragraph. I can't keep the format stable so the columns read correctly. I never had this problem with CAD.
I feel like a Beta tester right now trying to produce permit documents on a program that isn't finished yet.
Basically, my action processes a picture in different ways and saves each version in different folders within a main folder on the desktop. The action works fine but as soon as I rename or delete the main folder, the change is reflected in the action which forces me to re-record the "save as" parts of it. I would like to use the same folder structure since I have duplicates of it.
Is it something new in PS CC or specific to the Mac OS (Maverick)?
our photoshop cs6 (with latest update to 13.0.4) keeps crashing daily and is not stable at all. so we would work with cs 5 again, as this version is very stable and wont crash even once in a year.
we are daily/"9-5" working at a photographers´ studio and use 2 different macs:
- brand new mac pro 6-core (2010/Westmere) with 48GB RAM under system 10.8.3
- old mac pro with Two 2.66 GHz Dual-core Intel Xeon "Woodcrest" from 2006 with 16GB RAM under system 10.7.6
(both with standard equipped/shipped graphics cards)
cs6 crashes daily whith following tasks:
- frequent crashs: using "motion blur"
- frequent crashs: using "refine edge"
- sometimes using "transform tool"
during our tests, we found out, that "disable graphics card" (photoshop>settings>performance) in the mac pro from 2006, would prevent a crash, when using "refine edge". in the latest mac pro from 2010, we did not find any solution to prevent a crash.
a "crash", we define as follows: during the mentioned tasks, photoshop is gone from the screen in the blink of second, and an osx sign appears "photoshop has crashed"..
we have a dilema regarding Backburner 2013:
I work at a studio and we want to buy new servers and we want to purchase Windows Server 2012 wich, from what we read is based on Windows 8 architecture. We read BackBurner 2013's specification and Windows 8 didn't appear as supported.
Our question is: If we buy Windows Server 2012 Enterprise for the render farm will it work with Backburner 2013 without any problem?
Lots of previous photo experience, but pretty new to digital, so here's the deal. I have just learned that JPG files are somewhat unstable. Does this mean only when they are manipulated and re-saved, or anytime they are opened/closed?
So I have saved many of my best images in PSD after altering them, but my objective now is to create CD's or folders to use as different slide hows. My first attempt tells me that my laptop (new Dell XPS) doesn't "see" the PSD files, only the JPGs. So, the question ... after manipulating a file in PS, what file format should I save it in that is stable and most universally recognizable to different computers, etc?
can you confirm if the CS4 version of illustrator will work on a 64bit version of Windows 2012 TS?
View 1 Replies View RelatedI am having trouble printing to an HP Designjet T770 from AutoCad LT 2012, on a Windows 7 computer.
I am using the HPGL/2 driver. I can print a test page, and I can print from other programs.
When I try to print, it looks like it is sending it normally, but the printer just ignores it.
I am able to print to this printer from AutoCad 2010 on a Vista computer.
using ACAD LT 2012. If he opens a DWG file from a Sharepoint site, makes some changes to the drawing and then SAVES the file, his changes are NOT saved and there is no indication that they were not saved. Needless to say this is critical.
View 6 Replies View RelatedI recently loaded several versions of AutoCAD on to a Windows 7 machine. ALL versions will open a drawing if double-clicked from windows explorer, but if I try to open through AutoCAD, the program freezes as soon as I click on the "Open" button. This is true for AutoCAD 2010 through 2012.
Machine Specs:
Dell Optiplex 990
250GB HD
8GB Ram
I7-2600 proc
AMD Radeon HD 6670 (1Gb) Video Card
I also cannot open multiple instances of ANY version of AutoCAD in Windows 7.
I have been trying to create DXF in AutoCAD 2012, Civil 3D 2012 and Lt 2012 and every time I try to open the DXF after creating it, it comes up with:
Error in APPID table
DXF rear error on line 21308
Invalid or incomplete DXF input - drawing discarded.
I've tried saving it various DXF formats: 2000, 2004, 2007 and 2010, and all show up with the same error.
create the attached sketch by civil 3d 2012 , actually I have tried many time to do it but in vain.The main point is that only single line has utilized as an alignment of corridor.
View 3 Replies View RelatedUsing the COM Interops we can find the entities which were used toi create surface breaklines:
foreach (AeccSurfaceBreakline brklin in brklines) { object[] ents = (object[])brklin.BreaklineEntities; for (int i = 0; i < ents.GetLength(0); i++) { AcadEntity en = (AcadEntity)ents[i]; //do whatever with the Entity }}
I have, as yet, been able to figure out how to get the entity(ies) using 2012's .NET API. Is it possible, or do I have to stay with COM?
foreach (ObjectId surfId in CivilApplication.ActiveDocument.GetSurfaceIds()) {TinSurface surf = tr.GetObject(surfId, OpenMode.ForRead) as TinSurface;if (surf != null) {SurfaceDefinitionBreaklines brkdefs = surf.BreaklinesDefinition; for (int i = 0; i < brkdefs.Count; i++){Surface Operation AddBreakline brklines = brkdefs[i]; for (int j = 0; j < brklines.Count; j++){ SurfaceBreakline brkline = brklines[j]; //well, as of C3D2012 SP1 the actual entity associated with this breakline is not exposed via .NET} } } }