Revit :: 2012 Freezes And Crashes When Applying Materials To Wall Types?
Jun 23, 2012
This is the first time I experience a major problem with Revit 2012. I created a duplicate of an 8" concrete masonry wall for my student project. Then I selected the Edit option in the Structure to change the rendered material to concrete masonry. Suddenly the program freezes and crashes. A window pops up stating that Windows has detected a problem with Revit and must shut the program down. I've everything since my last save. As of now, I recreated a duplicate of the masonry wall I need and started drawing some of the walls for my project but I'm afraid to experiment with other materials. Background Information about my computer: I downloadeda free version of Revit 2012 student software to practice at home. I have Windows 7 64-bit, 6GB of Ram and Intel (R) Core i7 2.20GHz...(I checked all the software requirements before downloading the correct version of Revit 2012)
Do I have to uninstall the program and reinstall it again? Would the problem go away?
View 1 Replies
ADVERTISEMENT
Feb 21, 2012
How do I create simple wall types? I would like to create 2x6 and 2x4 walls with 7/16" OSB on them. I would like to see each stud when I going into 3D and I would like the dimensions to be from face of framing; not the OSB or centerline.
I would like to mimic the plan dimensions when I input the building into Rivet. Basically, I want to build a stick framed home so I can add the floors, walls and roof and then go into the mechanical and see how it all stacks out and is going to come together.
View 7 Replies
View Related
Jun 25, 2012
I want to make a list of all the wall types i have defined in our project-template.
But when i try the schedules i only seem to be able to list those that are "in use"?
Legend view seems totally useless as you cannot tag or list the elements and info like "description" etc.
View 2 Replies
View Related
Mar 8, 2011
I'm trying to make a Wall Types Legend using the Legend function in 2011. I did the first wall type just fine, placed it in section, tagged the material, etc. Now when I go to place another wall in a section view, it tells me the component is not visible in selected view. They are both new construction phase, stacked walls.
View 3 Replies
View Related
Jun 20, 2012
Most of the interior walls in the house are the same materials and finishes - finishes of veneer plaster painted, but rooms are to be differnent colors. I can make a wall the color that I want, but ALL that type walls become that color. Is there any way to make several different colors of rooms witihout creating literally dozens of different wall types?
View 4 Replies
View Related
Jan 1, 2014
Is there a way to get the default wall/roof/floor materials to appear transparent?
View 1 Replies
View Related
Aug 9, 2013
When I create the surface in conceptual mass and bring that in revit project and apply wall by face I see interior face of wall going exterior.
Can this be set in conceptual massing while creating surface so that when I apply wall by face interior face remains interior.
View 7 Replies
View Related
Sep 6, 2011
I recently tried exporting an FBX file from Revit 2012 in to another 3d software as well as the FBX converter. On both occassions, the materials don't show up, nor the textures.
View 1 Replies
View Related
Jan 25, 2013
Can Revit architecture 2012/2013 create a bill of materials? If not, which autodesk product can create a bill of materials on a kitchen design?
View 1 Replies
View Related
Jun 12, 2012
I am having trouble cleaning up different wall types joining at or close to a corner. I tried to over ride the clean up radius....no luck.
View 9 Replies
View Related
Jul 23, 2012
I am using the RetainWallVertical subassembly with a created gutter subassembly attached to the wall and a DaylightGeneral subassembly attached to the gutter assembly. My cut slope parameter is set to hold at 1.5:1. I would like to use a target (feature line or alignment) to daylight to and have the wall height adjust accordingly. Problem, I am not able to use a target other than a surface for daylighting. I can use my existing ground surface, which I am daylighting too, but I can't adjust the target point.
View 2 Replies
View Related
Jun 19, 2012
I have a problem applying materials/ color on a single face of a 3d object. I have read about holding "ctrl" frst.. what's annoying is this message [see attachment below]..
what causes that prompt? How can I get rid of that..? I try to click "overwrite" but it applies the material on whole 3d.
View 9 Replies
View Related
Jan 16, 2012
I have received some architectural models which were modeled in AutoCAD MEP and only have walls modeled as type Standard. Is there a way to transform Standard walls into cavity walls etc., giving wall makeup as you go - or do I have to re-model in order to get quality 2D cuts?
View 1 Replies
View Related
Jun 24, 2011
Having something very strange happen out of the blue.Have wall types like lightweight block (Component Priority = 300) and stud gyp walls (Component Priority = 500) suddenly cleaning up w/ each other.
Hasn't been happening before when base lines extend to each other, but suddenly on this new project they are.
I am expanding on my modeling w/ this project. I taken another step in 3D modeling w/ ACA and am extending walls vertically to multiple floors and referencing the base floor plan into (below) the base file of the second floor. Everything is working as I expected and set up EXCEPT for this one thing. Hard to point to this as the difference because I'm having this issue on the first floor....where the reference issue is not part of the equation.
Also, know there is a way for my lightweight block walls on the second floor to clean up/merge w/ lightweight block of the exterior walls being referenced in...but can't find where that "check box"/switch is. Found it many moons ago, but didn't need it then.
View 7 Replies
View Related
Apr 12, 2012
Any way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies
View Related
Jul 25, 2013
I have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling. This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level. I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite. I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined. I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
Surely there's a way to have different kinds of joins at different heights?
View 9 Replies
View Related
Dec 4, 2012
I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
View 2 Replies
View Related
Nov 27, 2011
Refer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
View 1 Replies
View Related
Oct 31, 2013
When I try to change the length of a wall it grows at both end. How to grow at one end only?
When I change the wall type to one with a different thickness, I cannot control which face of the wall remains fixed and which face moves. eg: change from 130mm to 250mm screws up my room width. How do I do this?
View 1 Replies
View Related
Apr 16, 2013
I am trying to make a floorplan of my house in Revit 2013, but I am having an issue when it comes to one wall in my house. I have an opening in the Master Bedroom that leads to the bathroom. This wall has a weird arched-like opening in it and I have no clue how to make this in Revit. I have attached a sketch.
Also, my exterior walls are 7' tall but the interior walls start at 7' and go up to 8' once in the middle of the house and reduce back to 7". How does one set that up in Revit?
EDIT: May have made the image too small to see, but the top is not arched, it is actually half of a decagon.
View 3 Replies
View Related
Jul 29, 2011
I have a question about wall profiles. I want to make a profile on a wall so I can make Zinc Panels on the wall that are 10" X 20". I've attached a picture of what I'm going for. I'd like it to have a 1/2" spacing between them and with a joint depth of 1" and I'd like to do this is the wall type so that I can use this wall in multiple places rather than having it model-in-place. Anyway I have made a profile that is 1" X 10" so that it can become my panel profile. But when I go to add it to the wall as a wall sweep as I have seen people do I get hung up on how to make it tile up the wall and also I don't understand how to make the profile so that it is 20" wide. I have a screen shot of where I'm editing this too. Below is the link of the site.
View 8 Replies
View Related
May 19, 2011
The problem:At our office we have created a large amount of custom 3d walls (mainly by modifying existing ones) and in the walls we have overriden the material colour in plan view from the default 11 (peachy/corally colour) to green/red etc. Now when we xref the drawing with the walls in it some drawings retain those colours while others show the walls with the default colour 11. Since it is the exact same drawing on our server being xrefed I assume its an option somewhere that I am missing.
I am running Cad Architecture 2011.
View 0 Replies
View Related
Apr 7, 2013
“Drag wall end” to the edge of the wall (indicated),In the attached screenshot, I wanted to drag the end of the temporary dimension from its location to the end edge of the wall but sounds not to respond!
How this temporary dimension can be dragged to the edge of the wall?
View 3 Replies
View Related
Oct 16, 2012
For some reason every time I add an effect or copy and paste something with an effect, Illustrator crashes. Running CS6 Creative Cloud.
View 1 Replies
View Related
Mar 18, 2013
using trial version of cs6. after using liquify it crashes. computer is up to date and I hesitate to buy if i can not fix problem.
View 25 Replies
View Related
Dec 10, 2012
I am currently working on a mac mini with OS X 10.8.2 and version CS6 of Illustrator.
My problem is that everytime I try to preview or apply a drop shadow effect (Effects > Stylize > Drop Shadow...) it freezes.
I have done a lot of things to try and resolve this issue including quiting and restarting Illustrator. Restarting the computer. Reinstalling illustrator, which ended up being a temporary fix. I have a screen shot of the program of when I clicked on the Preview box (just insert the colorful spining wheel of death).
View 6 Replies
View Related
Mar 21, 2012
Is it possible to change materials mid animation in inventor 2012? Essentially, im looking to rotate a camera arround an assembly,make the enclosure glass and do it again.
Additionally, Is there a way to use animations already created in an ipt file (using the same model) in Inventor Studio?
View 4 Replies
View Related
Sep 17, 2013
I've been using Lightroom 4 for almost a year with no issues. 2 days ago, it suddenly stopped exporting when I was in the middle of editing a session. It will export and entire catalog, but not single photos. When I attempt to export a single file, it will simply stop, and I have to force a shut down. I've tried rebooting my PC, creating a new catalog and resetting the preferences folder. Is there anything I can do?!
View 3 Replies
View Related
Jul 17, 2012
This did not happen with CS5 or with the Beta version of CS6. I have an integrated graphics card (Intel(R) G45/G43 Express Chipset, and 6 GB RAM).
View 6 Replies
View Related
Mar 28, 2012
I am having PDS Ultimate 2012 and working on inventor. when i open a file or open a new template ribbon freezes means menu bar doesn't work properly,if i change the ribbon appearance it doesn't update also i cannot switch between the menu bar tabs and if i turn on the visibility of the datum planes it doesn't show on the screen.But when i refresh the windows everything works sometimes. i have installed SP1 and even repaired inventor.
System Config:
OS Name Microsoft Windows 7 Professional
System Manufacturer LENOVO
System Model 20079
System Type x64-based PC
Processor Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz, 2300 Mhz, 2 Core(s), 4 Logical Processor(s)
Name AMD Radeon HD 6370M
Adapter Type ATI display adapter (0x68E4), ATI Technologies Inc. compatible
Adapter Description AMD Radeon HD 6370M
Adapter RAM 1.00 GB
View 2 Replies
View Related
Dec 14, 2011
My view is freezing in Architecture 2012 and when I close out of my drawing and open it again, the problem is fixed. What am I doing to make it freeze? It seems like it does it the most if I am in isometric. Also, I am working in a project manager and there are no Xref's attached.
View 4 Replies
View Related
