AutoCAD Inventor :: Extruding File After Import
Apr 9, 2012I have some trouble with extruding this autocad file after i have imported it in inventor. I have tried to make everything as a block but with the same result..
View 5 Replies
ADVERTISEMENT
AutoCAD Inventor :: Shrinkwrapped File Extruding / Sculpting And Delete Faces Don't Work
Jul 19, 2013I have a shrinkwrapped file. Now the link is broken from the actual assembly and the orginal assembly is now gone. Now in this shrinkwrapped file, there is a portion that I want to isolate. Is there any way to delete / remove the other parts that i dont need? Extruding, sculpting and delete faces dont work. So far the only thing I can do is add extrusions to the part but not remove.
View 1 Replies View RelatedAutoCAD Inventor :: Extruding Through Curved Surface
Jul 8, 2013I have tried, such as creating lines in a 3D sketch and projecting the geometry to surface, and creating a work plane, and both don't seem to work for me.... I'm trying to cut out a 5.8mmx14mm rectangle out of a cylinder. When I project the geometry to the cylinder's inner surface, I cannot trim the solid in order to extrude. I've attached the file.
View 9 Replies View RelatedAutoCAD Inventor :: Extruding To Complex Surface
May 16, 2012I can't post the original files, but I have gotten permission to post jpegs of what I am trying to do.
My end goal is to fill in between the grey part and the surface. The surface comes from another part in the assembly, and I used Copy Object to get the surface in this part file. Ideally I would like to do something like Extrude> To Next and select the surface as my terminator. I have done this with success with curved surfaces, but not complex curved surfaces. Does Inventor not handle extruding to complex curves?
Another option I tried was simply extending this part out beyond the surface using the Split feature to trim the part. Again, to no avail. I also tried creating a subassembly of this part and the part the surface is derived from with this part extending beyond the surface, deriving it and subtracting the surface part so I could use Delete Face with the Lump option. No dice there, either.
There was a hole in the side of the surface where I am trying to extrude the part (it is still open on the other side of the surface), but I used Patch and it seemed to fill it in just fine.
How to get accurate fill volume data in complex assemblies.
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
AutoCAD Inventor :: Extruding Bodies Around Parts
Aug 24, 2013I have been extruding bodies around parts, then using their verticies for the frame generator (to guard around complex machinery.I then suppress the body and am left with the guard frame.
when i go to get the mass for the part, it includes the volume of the solid body which was used to give the outline.how can i turn the material property to zero density?
AutoCAD Inventor :: Import IProperties Of Part File Into Assembly File?
Sep 24, 2012I want to import some of the iproperties of one ipt file into an iam file.how to do it.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
AutoCAD Inventor :: Extruding A Fully Constrained Sketch
Nov 1, 2012I'm having trouble extruding a fully constrained sketch. The sketch is a cross-section of a hollow cylinder that is splined on the inside surface (see attached part file). The line segments that create these splines seem to be grouped together because moving one line moves the others, however the sketch will not extrude.
I can't use the coincident constraint button to group the lines because they don't separate from each other. I also tried to use the close loop button but was unable to select all the necessary lines.
how I can extrude this sketch or make an equivalent sketch that is easier to extrude
AutoCAD Inventor :: Unable To Save After Extruding Cut In Weldment
Oct 7, 2011(Inventor 2012) I have a weldment. I can make holes and save, I can make revolved cuts and save. I can make chamfers and/or fillets and save. But if I try to extrude a cut (any cut), I receive an error.
Problems encountered while saving the document.
Error(s) detected while writing segment AmBREPSegment in database C:lah-blah.iam
Error detected while saving object of type MIxTransactablePartition in C:lah-blah.iam
Error detected while saving object of type MIxPartition in C:lah-blah.iam
The attempted write operation did not succeed. Part file may be corrupt.The database in C:lah-blah.iam could not be saved...
AutoCAD Inventor :: Lofting / Extruding To A Point Along A Curve
Jul 15, 2012Coming from Sketch up to real big boy tools. I watched the tutorial videos and tried poking around a bit for this specific answer but came up a bit short.
What I'm trying to do is loft a face to a point. Easy enough. I've got my point established on an offset work plane, and I can just loft to that, however, I get nothing but straight lines. (First attachment)
An example of the ideal outcome in SketchUp is the second attachment.
I'm having the most difficulty trying to draw the curves along which I want the face to be lofted because, even as I sketch along my 2D plane, I can't snap the endpoints of my arcs to the endpoints of the face (or the point to which they'll all connect).
AutoCAD Inventor :: Extruding Fully Constrained Sketch
Nov 9, 2013I am trying to constrain a point(on a different part) to the sketch(yellow) on the inside surface of the triangle part. If I try the constraint like how it is now, it only allows me to select one segment, not the entire triangular shaped line. It would work if inventor saw the sketch as one single element, but it of course does not. I tried making a 3d sketch of the inner surface and then constraining to that, but it did not work.
View 3 Replies View RelatedAutoCAD Inventor :: When Extruding Sketch Screen Automatically Switches To ISO View
Oct 3, 2012I have just upgraded to 2013, and there is one "feature" I find kind of distracting. When working in a part, I create a new sketch. When I extrude that sketch, Inventor automatically switches me to an Iso view. I don't want that. I would prefer to stay in the view that I established.
Is there a way to turn that off?
AutoCAD Inventor :: How To Import STL-file
Aug 2, 2012I have an STL-file that i need in an assembly to check if the machine that i'm building isn't to small.
I can import the STL-file in the assembly without problem, but i can't use constraints on it to put it in the correct place of my machine.
The STL-file isn't seen in the IDW - drawing.
AutoCAD Inventor :: 3Ds Max File - How To Import Assembly
Feb 15, 2012I have a 3ds max file that the company i work for needs to get into inventor. I have tried exporting the file to .sat, .iges, and .dwg file an none have imported the assembly into inventor properly.
View 9 Replies View RelatedAutoCAD Inventor :: RFA (Revit) File Import Possible?
May 29, 2012I have a .rfa file that I want to import to Inventor, is that possible?
View 1 Replies View RelatedAutoCAD Inventor :: How To Import XML File From CODEWARE
Sep 27, 2010I am testing out Inventor Pro 2011 and I need to find out how do I convert and exported xml file from CODEWARE into Inventor. I am going off this article
[URL].... as to how is it done.
AutoCAD Inventor :: Import BOM Structure Via XML File?
Mar 13, 2012By the UI, you can import the BOM structure via an XML file. Is it possible by API ?
View 6 Replies View RelatedAutoCAD Inventor :: How To Import NX 7.5 Assembly File
Jul 26, 2011When trying to import a NX 7.5 assembly file into inventor, there is a lot of duplication of parts, missing parts, and scattering of other parts. Is there a way to successfully import an assembly from NX to inventor, if so does it include all the original sketches and feature history that created the parts, or is that not possible?
View 8 Replies View RelatedAutoCAD Inventor :: Import SAT File With Color
Oct 25, 2011I have a problem when I import SAT file of a 3D model came from Revit architecture to Inventor.All colors disappear..I have already succeeded the exchange from Inventor to Revit with adsk file and rfd file format.
But, the exchange from Revit to Inventor is really hard for me.. I could just get gray colored geometry of model.Do you know any way to exchange with color?
AutoCAD Inventor :: How To Import PDF Or TIFF File
Sep 10, 2010I have heard that I can import a PDF file into Inventor, but how do I do?
View 3 Replies View RelatedAutoCAD Inventor :: Step File Import
Nov 6, 2012Im importing .stp files and only want to imort the surfaces, but some files have to have the solid imported as well. Why the file is like this?
View 4 Replies View RelatedAutoCAD Inventor :: Import Surfaces From Old MDT File?
Oct 4, 2013All I can get is 3d lines or ACAD_PROXY_ENTITY. Since the newer versions of IV did away w/ MDT I don't have any way of converting them.
View 6 Replies View RelatedAutoCAD Inventor :: Save And Import Sketches From One File To Another?
May 28, 2004I just wanted to know if you could make sketches in one part or file, somehow save it with a name, then open a new or existing part file and import that saved sketch. Is there a way to do this? Also, can you make blocks, as we could in AutoCAD, in Inventor?
View 5 Replies View RelatedAutoCAD Inventor :: Import 3D XML And Export File To OBJ Format?
Jul 26, 2013How can I import 3dxml file into Inventor format and how to export Inventor file to obj format?
View 3 Replies View RelatedAutoCAD Inventor :: How To Import Hatch Patterns From PAT File
Oct 16, 2009Inventor 2010 Style and Standard Editor includes 35 CUST## hatches. My guess is, it stands for custom. Is there a way to import hatch patterns from AutoCAD PAT file? This functionality is available for line types through importing AutoCAD LIN file.
Xeon CPU 3.6GHz
Nvidia Quadro FX 3400
Driver version 6.14.11.8246
Win XP Pro (32) SP3
4GB RAM w/o 3GB switch
AIS 2010 SP1
AutoCAD Inventor :: Step File Import With False Surfaces
Mar 12, 2013I have come across a problem where I import a step file. And it brings in a false surface that is not supposed to be in the file. When I highlight the base of the solid it only highlights what it should (not the false surface). The surface cannot be extrude cut or removed.
View 1 Replies View RelatedAutoCAD Inventor :: Import And Link Parameters From IPT To IAM File Using ILogic?
Apr 3, 2012I want to import the parameters from the .ipt file into the .iam file using a rule from iLogic (unless there is another way to do it?)
I pinched the code from the example hand rail iLogic part that comes with inventor and tweaked it to suit. After inputting the code shown in the image, when I click OK I get a 'fatal error' of some sort.
AutoCAD Inventor :: Import IAM File With Views And Positions To Showcase?
Sep 23, 2013I need to Import a IAM file with Views and Positions to Showcase. I found several tutorials on this, but as soon as I add a position in Inventor none of the above are imported. Without any Positions, Views get Imported.
It's Inventor and Showcase 2013.
AutoCAD Inventor :: Import IProperties Value From External Excel File
Dec 14, 2011i have made a iLogic Module who, whit an external rules, import the iProperties value from an external exel file.The exel file is connected from SQL with the our managerial software.This in the external rule:
i = GoExcel.FindRow("Z:DISEGNI_INVENTORDescrizioni.xls", "Descrizioni", "Cod.Art.", "=", iProperties.Value ("Project", "Part Number"))iProperties.Value ("Project", "Description") = GoExcel.CurrentRowValue("Descr. Articolo Princ.")'iProperties.Value("Project", "Project")
[Code] .....
It's work fine but i have same question. There is some string to refresh an iLogic Module? When i push the ruel button the rule add the custom value in iProperties, but there are disabled, i have close the module an reopen it for correct display the value of the iProperties.
this module work with single parts. Can I do an rule who do the same thing of my string but in one assembly, do this for every parts of assembly automaticly??
AutoCAD Inventor :: Building Design Suite Ultimate - File Export / Import Options
May 4, 2013One of the common processes we have to do is to transilate file formats into a type we can use. Most the time it is for use in AutoCAD MEP...
Is there a good one-stop place to get info on import export options from / to softwares included in Autodesk Building Design Suite Ultimate?
AutoCAD Map 3D :: Import ASCII Point Coordinates (from Comma Delimited File) Into File
Oct 17, 2011I'm relatively new to AutCAD map 3d but I've used arcGIS a while back.
I have existing roads, towns etc data that are already set to UTM 17. I want to import ascii point coordinates (from a comma delimited file) into the file. I can import the ascii coordinates as points fine (easting and northing), however the points come in as the absolute coordinates rather than geometric coordinates. I already set the files for right geographic projections. Beyond manually inputing the coordinates into the coordinate tracker, is there a way to import the coordinates form the file set for the geometric coordinates?
AutoCAD 2010 :: How To Import A Cuix File To Main Customization File
Jan 9, 2013i want to import my 2013 office workspace in to my 2012 home Version.
View 2 Replies View Related