When trying to import a NX 7.5 assembly file into inventor, there is a lot of duplication of parts, missing parts, and scattering of other parts. Is there a way to successfully import an assembly from NX to inventor, if so does it include all the original sketches and feature history that created the parts, or is that not possible?
View 8 RepliesI want to import some of the iproperties of one ipt file into an iam file.how to do it.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
I have a 3ds max file that the company i work for needs to get into inventor. I have tried exporting the file to .sat, .iges, and .dwg file an none have imported the assembly into inventor properly.
View 9 Replies View RelatedSomeone has given me a .wire file from Alias. I fired up a new assembly in Inventor but it imported into a part. There are many parts to this design, and I'd rather have them as separate parts. However what I have now is one part with many surfaces (which I can turn on or off). Any tips for bringing it in differently? Maybe I can derive some parts out from my existing part which has about 20 surfaces (which should be parts)?
View 9 Replies View RelatedI am trying to acheive copying parameter from one part/assembly to another part/assembly document and this is what i came out with:
Private Sub CopyParamToTarget(SourceFile As String, TargetFile As String, ByRef ParamList As ListBox) 'Declares the variables to be used in this sub Dim d_target As Inventor.Document = Nothing, d_source As Inventor.Document = Nothing Dim t_transaction
[Code]....
I did another version for Inventor VBA in which is quite similar to this length as well . . .
Tried using ComponentDefinition instead but it does not have access to the Parameters list.
This program continues to surprise me, negatively. I did not want to modify any thing, but to import/place a part into assembly and gives me this picture. why is so important to not modify library????
View 9 Replies View RelatedDescribe the external referencing of a part file by an assembly file? I keep getting confused between part file and an assembly file.
View 2 Replies View RelatedIs there a way to set up the BOM in the assembly file to show the top assembly as a line item with all it's children (and their children) listed underneath?
View 9 Replies View RelatedI attach a assembly file.
In front view, I can see all elevation drawing (DWG file)
but, when import this file to IDW sheet, I can't anything . I can look at 3D object section only.
How to convert Inventor assembly file to FBX file?
View 6 Replies View RelatedSee attached. Basically, the view for my IPN is not the same as the view from my assembly file. The view on the left in the attached PNG is of my IPN and the view on the right is my assembly LOD.
Any answer that will clarify why my IPN file shaded views are different from my IAM shaded views??
IV 2010 Tube & Pipe SP4; ACAD Mechanical 2010;
2.5 ghz Xeon Processor
8 gb RAM
Windows 7 Professional x64
EVGA GTX 560 2gb DDR5
I took an existing assembly from one specidifc directory and copied it to another location. Then one part by one I use the replace command to swap out the parts to map to the new location because when I went to iproperties it was still pathing to the old location. I change the new parts physical features (i.e. length, diameter).
I get done with it and all references are pointing to the new location.
I exit out of inventor and call up the new assembly and it has mate errors because the parts are all of the old ones from the original location. Why is it not remembering or retaining the new parts and there locations?
Even when I have gotten this screen I have selected "No" to the bottom (2nd) selection which is the original location I do not want.
I have to send one of my assemblies to a customer who has Solidworks I believe, so I thought I would just save the assembly as a step file, but when I try to do this it crashes my system probably due to the fact that I have quite a bit of embossing on one particular panel. Any other options?
View 4 Replies View RelatedIs there anyway of finding out a part or assembly files dependencies external to inventor without using vault?
View 1 Replies View RelatedI am trying to create a step file of an assembly, the assembly consists of maybe 50-100 parts. I am currently running Inventor 2009. In a new part file, I derive the assembly to make it one solid entity. Then I save that as a step file. However when i open the step file, i have a bunch of extra "parts" in my model tree. These parts seem to be where the bolts and threaded holes interfere or not all parts joined to the main solid model. How can I eliminate this?
Also on a side note, is there anyway to change the orientation of the WCS?
In inventor 2013 professional I have a problem using the section view in my assemblies files. When I active the section view it works well, as soon as I open a command (for example the measure of a distance) the section view disappear and the assembly appear in entire view.I didn't modified any configuration on my software.
View 4 Replies View RelatedIs it possible to identify the location of a part in an assembly file?
I cannot access (or find access to) global locations, just local. You may ask, whats the problem? Well, right now, I have 10 subAssemblies and they are all "located" at (0,0,0), which means I have 10 solids sharing the exact same space. This problem can be easily fixed if I can compare the Global Origin to a Local Origin, but I can only find the "work axes origin" which is worthless to me.
I am trying to create ADSK file for an assembly created in Inventor so that I can export it to Autodesk Revit. How can this be done?
View 5 Replies View RelatedI have used the derive component command to mirror parts many times but each time in the past I have had a desire for that part to be linked to the one I mirrored. I have a new situation where I would like to mirror a skeleton part file that I used on one assembly to make a new assembly.
For example, I used the part attached below to create a stair frame for a steel framed platform I am working on. It consists of geometry, work features, and sketches that represent the nosing line, guardrail, stair stringers, etc.
I have another stair on the other side of the platform that needs to be a mirror image of this one plus a few unique modifications. The new assembly cannot be "linked" to the other one as each of these assemblies needs to be modified independently.
How can I mirror this part to reuse work I have already done without having to create a new skeleton file from scratch? Using the derived part method, then breaking the link makes all of my sketch entities unconstrained.
Inventor 2013- I have to build a tool which I use all english but the base part the tool is making is in a iges file that is when I load is metric. Is there a way to convert this or do i have to redraw this?
View 4 Replies View RelatedI have written a program within Inventor that list all components of an assy with their properties (iproperties and properties from Producstream) and allow an export of the bill of material to Excel with our company layout.
I want to add a function to my program in order to print all drawings that belong to an assy.
I have the list of components and I want to use the new functionality of the Producstream menu that allows us to open the attached drawing.
But I don’t know which library and which property.
When I create a assembly , no problem , If I modify any parts in the assembly , the mods do not translate to the part file Inventor asks if I want to save the changes but nothing happens , everything is in the correct project folder , I have tried everything I can think of .
I have looked at several posts and comes up with a add on called "Feature Migrator" but Inventor must be able to it by itself?
I have an assembly file I made in Inventor 2011 that I published to DWF. When I view it in Design Review 2013 not all the parts are visible. If I zoom in on the area that they are suppose to be, they magically appear, but can't get a good view of the whole assembly that way. This trick doesn't work for all missing parts. I have tried to hide/unhide the missing parts, but that does nothing.
View 5 Replies View RelatedSometimes an assembly file can become really very big.
Try to delete all components, all custom ViewReps, Positional Representations and Level of Details and save the file. If the file empty is till very big, then this post might be interesting.
How do I open an 2014 assembly file to 2013
View 1 Replies View RelatedIn my company we work with quite large assemblies, a small project im working on now, contains 527 documents with a total of 3088 occurrenses. Our customers often request STEP files which is a real pain for us to create.
Usually we have to start exporting the assembly at closing time and let the computer work over night, and the product is often a file in the 200mb range, which is too heavy to handle via e-mail, and also takes a lot of time to import to other CAD software.
Using the Task Scheduler is not an option since our file server isnt compatible and refuses to let go of files unless they are checked out manually.
I am trying to add instances of an ipart to an assembly automatically from an excel file and need to be able to specify the occurrence x, y, and z positions. Since the Inventor version is so old I have not been able to find the proper documentation.
View 1 Replies View RelatedMy goal is to open have people go into a central assembly file, type in their specific parameters and the various part files update within the assembly. I wish to do this without the need for an excel sheet, but when I try to link the parameters from the assembly file to the part files, it will not allow me to insert these parts. I get an error about an "assembly can not be placed into itself."
Iparts will not work as this has an infinite amount of sizes.
I have finished all my parts and now i have to assemble them. I normally just use the constrain tools, but this time i need to set a part in mid air. I would like to use the move tool, but with exact xyz coordinates. I only seem to be able to do that with an UCS (coordinate system), not the part itself. I guess it's just a button i'm missing somewhere.
View 2 Replies View RelatedHow can I make an assembly file independent from the part files that went into it? I tried converting it to STL then opening the STL document, but that causes problems with what I'm trying to accomplish.
View 4 Replies View RelatedI have an assembly with a few parts inside and want to create a new part(hose) in the assembly and link some faces from other parts within the assembly to my new part to show the routing of the hose.
Can I link faces within an assembly to one of the assembly components.