AutoCAD Inventor :: Import Parameter From Part / Assembly?
Jun 24, 2013
I am trying to acheive copying parameter from one part/assembly to another part/assembly document and this is what i came out with:
Private Sub CopyParamToTarget(SourceFile As String, TargetFile As String, ByRef ParamList As ListBox) 'Declares the variables to be used in this sub Dim d_target As Inventor.Document = Nothing, d_source As Inventor.Document = Nothing Dim t_transaction
[Code]....
I did another version for Inventor VBA in which is quite similar to this length as well . . .
Tried using ComponentDefinition instead but it does not have access to the Parameters list.
View 5 Replies
ADVERTISEMENT
Apr 1, 2013
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
View 5 Replies
View Related
May 26, 2013
There is a part with a model parameter in an assembly.
Is there a way to access the part's parameter from within the assembly?
View 5 Replies
View Related
Oct 15, 2013
I'm trying to run a for loop to check a part's thickness parameter within an assembly but I do not know how to access that parameter from the assembly. Once I check that the thickness does not equal 1/4" I want to assign the sheet metal rule to be user defined. Here is what I got so far:
Dim SheetMetalRule As String = BODY_GAUGE & " " & SHEET_METAL_RULEDim assyDoc As AssemblyDocumentassyDoc = ThisApplication.ActiveDocumentDim partDoc As DocumentFor Each partDoc In assyDoc.AllReferencedDocumentsIf partDoc.ComponentDefinition.Parameters.UserParameters("THICK").Value = .25 ThenElse If partDoc.ComponentDefinition.Parameters.UserParams.Value <> .25 ThenThisApplication.Documents.Open(partDoc.FullFileName, False)SheetMetal.SetActiveStyle(SheetMetalRule)partDoc.SavepartDoc.CloseEnd IfNext
View 1 Replies
View Related
Oct 24, 2013
I have a multi body part that I componented into an assembly. I am trying to get the assembly parameter in this case, "Height" to drive the parameters in the part model. I think I am using the right code but I get an error when I run the rule.
View 5 Replies
View Related
Nov 8, 2013
I have an assembly inside of Inventor Studio. One of the parts inside of the assembly has a parameter that I would like to animate. When I select the "Parameters" function within the "Animate" tab on the ribbon, I get an error:
"There are no favorite parameters defined."
This worked fine when I tried the same thing with only the part inside of Inventor Studio, but not when the part is included inside of an assembly.
View 3 Replies
View Related
Mar 26, 2013
This program continues to surprise me, negatively. I did not want to modify any thing, but to import/place a part into assembly and gives me this picture. why is so important to not modify library????
View 9 Replies
View Related
Sep 24, 2012
I want to import some of the iproperties of one ipt file into an iam file.how to do it.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
View 9 Replies
View Related
Mar 28, 2012
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies
View Related
Dec 11, 2013
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
View 6 Replies
View Related
Nov 15, 2013
New user 2014
Part created in assembly does not update to part file.
View 9 Replies
View Related
Mar 29, 2012
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
View 7 Replies
View Related
Jul 1, 2013
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies
View Related
Oct 3, 2013
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
View 5 Replies
View Related
Oct 20, 2011
How can i run a rule in an assembly to control a parameter that occurs in different parts ie to turn a feature on or off on mutiple parts
View 4 Replies
View Related
Aug 20, 2013
If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
View 4 Replies
View Related
Feb 7, 2013
I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
View 2 Replies
View Related
Dec 3, 2013
Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies
View Related
Apr 1, 2003
I have a part file ("part1.ipt") that has a user parameter called "Height". When I open this file as a part document, I can modify the "Height" parameter to change the height of the part. This functionality works great:
Set oPartDoc = oApp.Documents.Open(sPartFileName, True)
Set oParameters = oPartDoc.ComponentDefinition.Parameters
'change part height to 30 cm
oParameters.Item("Height").Expression = 30
Now, I am wanting to add this part to an ASSEMBLY document, then change the parameter to 30, but have been unable to do it.
I have this so far:
Dim oAsmCompDef As AssemblyComponentDefinition
Set oAsmCompDef = oApp.ActiveDocument.ComponentDefinition
Dim oOcc As ComponentOccurrence
Set oOcc = oAsmCompDef.Occurrences.Add(sPartFileName, oMatrix)
After I add all the parts, I highlight a part in the assembly pane, I click on FxParameters but I don't see the User Parameters for the part. Are the User Parameters not available when a part is placed into an assembly?
This assembly will have multiple parts added from the same file name, but the "Height" parameter needs to be modified for each occurrence.
View 5 Replies
View Related
Jul 28, 2013
Is it possible to locate where a parameter is used in a part? Looking through every sketch to find a parameter becomes tedious when there are several dozen sketches and parameters in use.
View 2 Replies
View Related
Jul 31, 2012
I need to assign the dimension in my screenshot to a parameter so I can use it to drive another assembly. However, I can't find any way to capture it in a usable manner.
In the screenshot I have an associative part inserted that contains only a sketch with the projected line and point that I wish to measure between, but the geometry in the sketch does not update when the model geometry changes. This seems to be normal behavior?
View 3 Replies
View Related
Sep 12, 2012
I have created a multi-value parameter in a part and exported it. I then linked it in the assembly but I am unable to edit it. I tried using iLogic but it also does not alter the part. Please see the attached 3 jpegs.
View 9 Replies
View Related
Jul 26, 2012
this code works for parts. But how to change it that it works for assembly? I would like to select a part and than change the value.
m_invApp = GetObject(, "Inventor.Application")
' Get the Parameters object. Assumes a part or assembly document is active.
Dim oParameters As Parameters
oParameters = m_invApp.ActiveDocument.ComponentDefinition.Parameters
[code]........
View 5 Replies
View Related
Apr 26, 2013
I want to use a parameter in my assembly as the name of a part i'm referring to in a rule but so far I have had no luck making it work. My knowledge of iLogic is pretty limited.
I am making a configurator for a staircase and I am working on the stringers now. There will be 3 or 4 different stringers (each one is a separate part) and the configurator lets you choose things like the angle, length and height of the staircase by entering values for those in a form in the assembly. Once you are done entering the values, there will be an update button that will send all the parameters to the different parts that are in the assembly and have them change accordingly. Now, say I want the length to change. I enter a length and press update and here's my problem. To which stringer-part is it going to send the length to? I can make it send to all parts but that means that I have to write one line of code for each part and if I ever add a new kind of stringer, I need to check all the rules and new lines where needed. I would like to make this dynamic by having only one line in which the part name is the same as a parameter I have in my assembly
I can either write it like this:
Parameter("Stringer1:1", "Length") = LengthParameter("Stringer2:1", "Length") = LengthParameter("Stringer3:1", "Length") = LengthParameter("Stringer4:1", "Length") = Length
But I would like to write it like:
Parameter(""Assemblyparameter":1", "Length") = Length
Where Assemblyparameter is a text parameter and simply the name of the part that is inserted.
When I choose, for example, stringer 3 in my form, Assemblyparameter will be Stringer3. This would save lots of time in the future whenever new parts are added.
View 2 Replies
View Related
Jan 30, 2013
I would like to add tree parameters to this part. One is a wire diameter. Another should be the length of the wire. The last should calculate the weight of the wire. Then I wish to set the mass of this wire part equal to this last parameter. Is it possible somehow?
View 3 Replies
View Related
Oct 1, 2013
The commented code does not work. I want to be able to open a part and change its size parameters before i open the assembly. this code will run as an external rule in a new empty file.
If i can do it without opening the part, that is even better. Test can I open a part, change a param, then close part.
Dim fname As String
fname ="C:Workspacemy_progchanF_BB_L.ipt"
Dim pDoc as PartDocument = ThisApplication.Documents.Open(fname,False)
pDoc = ThisApplication.Documents.Open(fname)
These are just attempts to find a syntax that works. I need the method to change the parameter.
'param = pDoc.PartComponentDefinition.Parameter.Param("TKNS")
'pdoc.parameter.Param("TKNS") = 8
pdoc.Save
pdoc.Close
View 4 Replies
View Related
Mar 19, 2012
Im quite new to customizing inventor and have been playing around with I-logic. I can get I-logic to enter values into existing ipt paramaters when run from a rule within the idw. I can also get I-logic to create a custom Paramater within the ipt using some copied API code, however I dont know my way around API at all yet. So...
I was wondering if it was possible to create a custom part parameter from an ilogic rule run in an idw with that ipt featured?
View 4 Replies
View Related
Apr 12, 2012
Inventor 2012.how would I input the total quantity of doors in the .iam in order to update the Parts List quantity column? I have a lot of user inputs in the .iam file set up to change width, height, etc that are based off of Parameters in the .iam, but I don't know how the user can enter assembly quantities in order to get the Parts List to update the Quantity column correctly?
I have attempted using custom iProperties but how to get it to display based off a user input Parameter.
View 3 Replies
View Related
Aug 14, 2009
What is the name of a value that might hold the total number of bends in a part?
Or at least how those feature are managed?
Simply put, I'd like to pull the total number of bends into a parameter so it can be exported later.
View 3 Replies
View Related
Jan 17, 2013
I have an iLogic template part that has a multi value parameter. In this case the product code can be selected from a list of 4 codes. In futre we may need 5 and the 5th may need to be available to older parts.
I would like to avoid having to add the 5th as an option to every part we've ever made when the 5th becomes required.
I'd like to have the list of codes stored in an external file (Possibly an xml) and the template part reference that file to acquire it's list of available codes. That way I can add codes to the xml and all the files will have their list of available codes updated.
View 2 Replies
View Related
Jul 26, 2013
I have a flange that I use iLogic and the parameters list to update the different styles. My problem is that my flange won't update until after I hit save and update. My other square flange is not this way. As soon as I change the parameter in my square flange it immediately updates. Is there anyway I can get my round flange to update immediately like my square flange? I attached pictures below.
View 1 Replies
View Related
