AutoCAD Inventor :: IPN Is Not The Same As View From Assembly File
Aug 29, 2011
See attached. Basically, the view for my IPN is not the same as the view from my assembly file. The view on the left in the attached PNG is of my IPN and the view on the right is my assembly LOD.
Any answer that will clarify why my IPN file shaded views are different from my IAM shaded views??
IV 2010 Tube & Pipe SP4; ACAD Mechanical 2010;
2.5 ghz Xeon Processor
8 gb RAM
Windows 7 Professional x64
EVGA GTX 560 2gb DDR5
View 9 Replies
ADVERTISEMENT
Jun 5, 2012
In inventor 2013 professional I have a problem using the section view in my assemblies files. When I active the section view it works well, as soon as I open a command (for example the measure of a distance) the section view disappear and the assembly appear in entire view.I didn't modified any configuration on my software.
View 4 Replies
View Related
Apr 17, 2012
I have received a great solution from Bobvdd allowing ilogic control of the view rep in a part file (not an assembly file). The code below works brilliantly when the part file is the active document. However when the part is placed in an assembly and the ilogic is run with the assembly active, the code produces no result. How to modify the top 6 lines of code?
Dim oApp As Inventor.Application
oApp = ThisApplication
Dim oDoc As Document
[Code]....
View 2 Replies
View Related
Mar 13, 2013
Is there a way to save a section view in the assembly as a view rep? Am using 2011.
View 9 Replies
View Related
Apr 2, 2013
Is there a quick way to detail parts from an assembly without having to browse to a part and then search through and select a part and insert a Base View?
For instance from within SolidWorks you can insert a view of an assembly and if you need to detail any part within that assembly you can simply click/select on the part in an assembly view and right click insert view then your View Menu pops up and you are moving forward. If you have to detail several parts you can spit out their Base Views in a matter of seconds. Even if you are making a seperate sheet just for the parts it is easier to insert an assembly view off the sheet and select the parts from there insert all of your part views then delete the assembly view if you want. You can also go to the properties of each view and link the balloons to your assembly BOM.
It is very useful if you are generating drawings such as I do with most parts for the assembly being detailed on the same sheets.
So is there a quick way to get the parts detailed?
View 9 Replies
View Related
Feb 19, 2013
I need to create an exploded view of an assembly to show how it's supposed to be put together. "Hey, why not use the slick presentation feature in Inventor? I've already got the model!" It's not working out to be that slick.
Outlined in red, is the "wrong" trail that Inventor put in by default. I added the highlighted trail, which is what I want and reflects how things actually go together. How do I get rid of the one I don't want? Hide turns off both of them. Delete deletes the tweak. All I've found was a workaround where I hide the line in the drawing.
View 2 Replies
View Related
Oct 26, 2011
Recently I have had two assemblies change at random times to a monochrome color and I cannot change them back to their respective colors. I can open sub-assemblies and they show as the correct color but when I close them the main assembly and the recently open sub-assembly go back to monochrome. When placed on a drawing sheet they appear the correct color on the screen and printed in color. The Visual Style is Shaded With Edges.
System:
Intel Core T7700 @ 2.40 GHz
8 GB RAM
250 GB SSD
NVidia Quadro FX 1600M
View 6 Replies
View Related
Nov 25, 2012
I have an assembly which contains some content centre tapered roller bearings. When I do a slice of the entire assembly the bearings remain solid. Within the document settings>modelling tab the "Participate in Assembly and Drawing sections" is checked.
How can I get the part to be sliced within the half sliced view like everything else?
View 2 Replies
View Related
Jun 19, 2012
I need my colleagues and customers to view some of the models I create, and be able to manipulate them.
No matter how much I ask, they ar not going to download a viewer - they just throw up their hands and say "can't, shan't won't". So I end up having to take numerous screen dumps and print, which in reality are much less useful.
I have seen components by some of our suppliers (though I cannot find an example now) online and viewed in Internet Explorer where I can view, manipulate, and even section their 3d models without needing to worry about viewers.
How this can be achieved with Inventor Assemblies?
View 1 Replies
View Related
Feb 14, 2013
Is it possible to know if the assembly view is isometric view or not.I need to perform check to get this value.
View 9 Replies
View Related
Jun 26, 2013
Just got updated from IV 2012 to 2013 with a new Dell (yawn) workstation to boot. OK, I did a section view of a pretty complex assembly and when I tried to take a measurement, the section view just dissapeared and it went back to full view. One of the primary uses of using section views is to view / inspect / measure, that which cannot be seen in the normal full view.
Why did this break in 2013 ? and is there a patch to fix it ?
View 9 Replies
View Related
Sep 21, 2012
Recently when I have placed a view of an assembly into an idw drawing, then try to dimension distances between parts it gives me strange looking dimensions, or no dimensions at all. It looks as though the dimensions are going from the edges of each part at different angles, when I want them to be parallel to the view. I just want the dimension from a line to a line in that view as though it is 2d, but it is acting like it is still in 3d. I do not know if their is a setting that will change this or not.
I attached a screen shot of what the dimensions look like.
View 6 Replies
View Related
Apr 11, 2011
I am wondering if there is a way to use a part of one piece located in an assembly to cutout a portion of another piece located in an assembly when both pieces occupy the same space?
The situation I'm in is that I've got an L bracket (piece 1) resting on top of a piece representing a concrete block (piece 2). The L bracket has metal studs attached that protrude into the concrete. Idealy I'd like the mass of concrete located in the same space as the studs removed so that when I generate cross sections everything adds up.
View 5 Replies
View Related
Sep 1, 2011
Is it possible to define a View Representation in an assembly such that a half section view is active, but only for a certain set of parts within the assembly?
View 5 Replies
View Related
Jan 10, 2013
Is there a way to have a view in a sheet that displays a few specific components of an master assembly? There is a motor/gear-box assembly within my master assembly that I don't want to make a separate assembly for BOM purposes, but I want a .ipn view with the motor/gear-box "assembly" exploded. I tried making everything else in the master assembly "not visible" for the particular .ipn view, which works fine, but if I add or replace anything in the master assembly, those additions appear in the motor/gear-box .ipn and screw up the view.
I could just make a whole new assembly for the motor/gear-box and use that for the exploded view, but I would rather the view update to reflect slight changes I make in the motor/gear-box "assembly" from within the master assembly.
So can I create a .ipn view and say, "I want these particular components of an assemly to appear in this view but nothing else"?
View 5 Replies
View Related
Jun 12, 2012
When I make a half section view in an assembly the frame generator members do not section, they remain full length. Is this normal or something with my setup?
2012 SP2.
View 2 Replies
View Related
Aug 24, 2012
when open an assembly not all parts are shown. To be able to see entire assymbly need to change View representation to Master manually. How to achieve this in Ilogic?
View 5 Replies
View Related
Jan 7, 2014
I create an IDW view of a subassembly by inserting the parent assembly, make it a non-associative view, then turn off visibility of unwanted subassemblies. When later working in the model and adding a part to one of the non-visable sub-assemblies, that part becomes visable in the IDW views in which the subassembly was non-visable, requiting me to edit all veiws in which the subassembly was non-visible. This can be quite a number of instances. Is there a way to prevent this?
I may have a more fundamental workflow problem: I create assemblies composed of subassemblies that need to be detailed sperately. I have found that in order to correctly create a structured BOM and to have the ballon lables to correspond to the structured BOM, I create the drawing views as described above. If I would just insert the subassembly to detail it, I don't understand how to get it to relate the balloon labels in the subassembly view to my master BOM.
View 6 Replies
View Related
Nov 29, 2011
Trying to do two variations of an assembly using representations. I turned sub-assemblies off in different representations by unchecking "visibility." I can switch back and forth between representations in the assemby and the sub-assemblies go on and off, but drawing views where I've selected a given representation still show the "invisible" assemblies.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
View 6 Replies
View Related
Jun 14, 2012
I am trying to get the correct total mass of a particular assy variant in a view label. I am trying to avoid using I-Assemblies due to the length of time it takes to set up and inevitable fudging of parts lists with phantom parts when things go awry. Anyway, to get around that clumbsiness, I use a combination of suppresed parts, assembly Level of detail (LOD) and View representations to switch parts on and off for various assembly variants of a theme (which works fine for me). see my "Mass of LOD's.jpg" attachment which should fully explain the parts list filtering and what I WISH to achieve. My objective is to get the correct MASS per Level of Assy and View Rep (both called the same) to be automated, correctly (as per LOD/VIEW REP), ideally, in the view label or in a leader note. I reckon I was able to do this way back in MDT? Any enhancement in Inventor 2013?
Inventor 2012
Vista Ultimate 64bit
View 2 Replies
View Related
Oct 6, 2011
there is a command or simple procedure to actively view a section plane in an assembly or part. I know there are the static methods of using slice graphics and section view however I'm looking to create a live section where I am able to constantly move the plane through the model thus altering the live section as it appears on screen, similar to the way a model can be viewed in Tekla with the cut section command.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 5 Replies
View Related
Oct 24, 2011
Is there a way of using Ilogic to make hidden lines of specific parts in an assembly drawing view visible? If a part with hidden lines showing is suppressed and then unsuppressed the hidden line option becomes unchecked, therefore I need a way of rechecking this option through code?
View 2 Replies
View Related
Nov 4, 2013
I want to create a rule with CommandManager.pick who see the name of assembly and send a custom ipropertie to all parts of this assembly view in drawing, this is my none finish rule.
Dim doc = ThisApplication.ActiveDocument
Dim entity = ThisApplication.CommandManager.Pick(
SelectionFilterEnum.kDrawingViewFilter,
"SÉLECTIONNE UNE VUE")
modelName = IO.Path.GetFileName(ActiveSheet.View(entity.Name).ModelDocument.FullFileName)
PART = Left(modelName, 11)
EXT = Right(modelName, 3)
FIRST = Left(modelName, 3)
[code]....
I have the rule "SEND TO PARTS" in my assembly but i have this error message
MEMBER NOT FOUND. (Exception from HRESULT: 0x80020003 (DISP_E_MEMBERNOTFOUND))
View 8 Replies
View Related
Sep 24, 2012
I want to import some of the iproperties of one ipt file into an iam file.how to do it.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
View 9 Replies
View Related
Dec 13, 2013
Describe the external referencing of a part file by an assembly file? I keep getting confused between part file and an assembly file.
View 2 Replies
View Related
Feb 15, 2012
I have a 3ds max file that the company i work for needs to get into inventor. I have tried exporting the file to .sat, .iges, and .dwg file an none have imported the assembly into inventor properly.
View 9 Replies
View Related
Nov 4, 2013
Is there a way to set up the BOM in the assembly file to show the top assembly as a line item with all it's children (and their children) listed underneath?
View 9 Replies
View Related
Jul 30, 2013
I attach a assembly file.
In front view, I can see all elevation drawing (DWG file)
but, when import this file to IDW sheet, I can't anything . I can look at 3D object section only.
View 1 Replies
View Related
Jul 26, 2011
When trying to import a NX 7.5 assembly file into inventor, there is a lot of duplication of parts, missing parts, and scattering of other parts. Is there a way to successfully import an assembly from NX to inventor, if so does it include all the original sketches and feature history that created the parts, or is that not possible?
View 8 Replies
View Related
Oct 21, 2013
How to convert Inventor assembly file to FBX file?
View 6 Replies
View Related
Feb 14, 2012
I took an existing assembly from one specidifc directory and copied it to another location. Then one part by one I use the replace command to swap out the parts to map to the new location because when I went to iproperties it was still pathing to the old location. I change the new parts physical features (i.e. length, diameter).
I get done with it and all references are pointing to the new location.
I exit out of inventor and call up the new assembly and it has mate errors because the parts are all of the old ones from the original location. Why is it not remembering or retaining the new parts and there locations?
Even when I have gotten this screen I have selected "No" to the bottom (2nd) selection which is the original location I do not want.
View 9 Replies
View Related
