I have made a movie and its 2 hours long,i knew trying to save this to a 4.7 gb dvd I would lose a little quality, well I'm impressed with the results, but for some reason the finish movie isn't full screen, now I know its saved at 4:3 not 16:9, and with 4:3 I expected to have space on both side of the screen when watching it on a TV or computer . But I also have quite a bit of space on the bottom and top as well. Here the properties of my project.
This seems to have only started happening recently, and it's a pain. After you preview an effect in full screen, the time navigator brackets are pulled to the very start and end of the video. You return from a fullscreen video preview to see your timeline extended over the whole duration of the project.
Is there some way to turn this off? I frequently work on small sections of a project, regularly watching full-screen previews to check how various changes look, and after the tenth or so time what starts as a minor irritation becomes completely infuriating. It seems like something easily fixed, but I've had no luck finding out how.
After realizing the Mercalli runs better on single clips, is there a way of editing a clip within a project and saving (after "creating" this clip only) and then reinserting into the project?
Can I run Video Studio Pro X4 at other than full screen? While working on a project, full screen is fine. But, once I start rendering I'd like to have my PC back and do other things and have VSP render in the background. I opened the preferences dialog, could find nothing relevant. Doesn't appear to be the normal windows shrink button in the upper-right, only minimize which takes VSP totally off screen.
I download avi files and then edit them in Videostudio X4. THe avi's are always from different resolutions and framerate.
When i play the converted or edited avi files on my mediaplayer on a Widescreen tv then the video is played may time not full screen. Sometimes it is on top and sides filled with black borders.
I would like the video's always be full screen on tv (off course with good quality).
My question is: how can i see in Videostudio if the video can be played full screen on tv?
Let's say i have 2 video's: divx / xvid 576 x 320 at 25.000 fpsec and 512 x 384 at 188.900 at 25.000 frames per second. Would these files be played full screen on the tv?. How can i calculate that it is 4:3 or 16:9 and what must the preference be in Video studio itself: 16:9 or 4:3?
I have been using Ulead Video Studio 6 for years creating slide shows and burning them to DVD. While playing DVD, made in Ulead Video, the slide show would display in full screen on any TV (for example a horizontal picture would be displayed in full screen and vertical picture would be displayed from top to bottom exposing some black background on the sides which is OK). Now I am using Video Studio Pro X3 and after I create a DVD there is a black background around each photo during playback. In other words, each photo seems to be slightly reduced in size or there is a black border around it during playback of DVD.
whenever i try to capture a full screen application, say like World or Warcraft, I select the program that i want to record, and when viewing the recording, it shows up black.
My exported videos don't seem to be full screen. My source data are jpg pictures in 4272x2848 resolution (Aspect Ratio of 3:2) turned into time lapse videos. I have tried exporting in MPEG-4 and WMV Screen capture 1920x1080 (1.777:1) and the resulting videos have black bars on the sides because of the different aspect ratio. I would ideally like to have an imported video file that is the same aspect ratio as the source pictures, something like a 1620x1080 (3:2). Can I pick a custom resolution for exporting? Is there a way I can crop the black bars out afterwards? Can I apply a cropping filter to the current project before exporting?
The "Enable Widescreen" setting had no effect on the videos, they came out identical.
I've been using ulead vs 10 and now corel vs x4 pro to interface and record video from a microscope. I produced a DVD for microbe identification which has been purchased by 100s of amateur scientists and organic farmers. I record direct to hard drive via firewire with a Sony HD camcorder with a remote control 10X analog zoom; 37 mm lense. It is a lovely old camera.
1/ The recording controls are not accessible when in full screen mode which means I need to start recording, open the full screen then focus and start tracking my organisms with the microscope stage controls. To stop recording I need to go to small screen again first. Has this function been changed in the x5 version?
2/ When using the HD settings on camera and software, there is a delayed reaction to the computer so this makes tracking the microbes impossible. I doubt this is caused by lack of RAM I have 24 GB on a windows 7 64 bit.
3/ Occaisionally when I am observing and/or recording, the transmission freezes. I think this is likely something trying to run in the computer....Perhaps with creating a dedicated profile where I could stop any of this interference.
4/ I've been using an external USB 2.0 hard drive for storage but it is too slow. I've been thinking of a SATA external drive or USB 3. Does any huge advantages for the extra money to get a SATA external drive over USB 3.0?
I need to have an image appear as full screen initially and then reduce in size and sit top left of screen so that it remains visible, whilst other images come and go across the remainder of the screen.
I can't figure out how to adjust the size of the program screen when in Full Edit Mode. I can see portions of the Quick Fix menu and none of the Guided Fix menu. There seems to be no way to resize the window.
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
With CS I was able to press F+TAB to get a blackbackground screen for viewing my work ,why can't I do this with CS2 or is there another combination for CS2?
I'm getting the impression that I am behind the times, or else in my own world about how people use Photoshop- what happened to hot keys in full screen?
-Premise: I like working in full screen mode. I see only my composition, and access all of Photoshop's functionality with hotkeys.
It used to be that, in Full Screen mode, one could press alt+f to access the file menu, or any other menu using the correct letter. Is there anyway to get the same results in Photoshop without leaving full screen? What happened to alt+'space' to access the common Windows Application menu for things like Minimize, Maximize, Move, Close, etc? I see that I can click on the PS icon at the top right, but this is not the same: consider those of us who use multiple monitors, sometimes the application closes on one monitor and then is re-opened when that monitor is no longer present. In cases like these, the application is stuck on a non-existent monitor with no way to use it. Alt+'space' used to be the solution for this.
How can I open the Illustrator CS 6 in the full screen mode. The program opens every file in the minimized mode and I think it's annoying when I have to clcik the full screen every time.
When I press F for Full Screen and then the fwd. slash to see before/after nothing happens. Is this normal, if so it would be nice to see before and after in full screen.
I'm now suddenly unable to use Full Screen Mode.I have a PC, and always would use the 'F' key to toggle between screen modes. But when I do this now, the screen just wobbles then stays in the standard screen mode. Even if I go to View --> Screenmode --> Full Screen Mode, the same thing happens.
I'm scanning slides with the intention of showing them in HD. So I need to crop the 3:2 slide format to 16:9. Is there any way to view a selection full-screen other than an Action? At the moment I make the 16:9 selection, crop, jump to full-screen mode, remove the selection rectangle, and CMD-0 to fill the screen.
I usually use photoshop (cs6) in full screen mode with menu bar. Often I use the window+d shortcut to return to the desktop. From here, whatever window I open, ie my browser, explorer, etc, photoshop pops up in the background minus all the menu bars. This is very annoying because it means I cannot work with files on my desktop.
I recently ran into an issue where Photoshop was freezing (URL ..... - my issue starts at reply #4) and in order to solve it, I had to open Photoshop by pressing CTRL + ALT + SHIFT, which deletes all preferences. Now that I can open Photoshop, I can't toggle into the different screen modes. The F key doesn't do anything anymore and the options on the toolbar are disabled. I can only choose Standard Screen mode.
What's wrong and how can I fix this so I can work in full-screen mode again? I am on a MacBook Pro using the latest version of Photoshop CS6 from Creative Cloud.
I recently installed / upgraded to CS5.1, set up all my preferences, keyboard shortcuts, presets, plugins. All worked fine, day in - day out, for the last three weeks. About three days ago this anomaly appeared...
When I zoom in (cmd +/), the window will resize, but only part way. The window will move over flush right on the monitor, but leave about one inch of space between the window and the left side of the monitor, and increase in size until it fits aprox 2/3rds of the monitor / screen. It stops enlarging and leaves about 3 inches of space between the window and the bottom of the screen. At that point I get scroll bars. So I end up with a much smaller window to work in.
I can grab the bottom right corner of the window, pull it open to fill the screen, but as soon as I go to zoom in or out, the window jumps back to the smaller size with the gap on the left side and bottom.
Option bar is "Standard Screen Mode"
All my pallets are on a separate monitor, so nothing else is on my main monitor that would limit the size of my window as I zoom in.
My preferences are set to: • Zoom Resizes Windows • Enable Flick Panning (works fine) • Animated Zoom OS 10.5x 10GB ram
I don't know if I inadvertently changed something to cause this.
Is it possible to have more than one picture (preferably 2 or 4 and maximum 6) on a full screen at the same time. So that choosing which picture you want to keep is made easier. Now I increase zoom of thumbnails but this leaves a lot of unused space around them including the different tool bars.
Image with resolution larger than monitor size, view in PSP set to 1:1...Ctrl+Shft+A for full screen view.
PSP switches to full-screen with move (hand) tool present for moving around the image. However, when the move tool is used it behaves like the Esc key and defaults back to preview view within PSP.
I just haven't found the setting, but I can't seem to make the cursor disappear during full screen preview in PSP x4! Is it something I'm not selecting?
I have searched to the ends of the internet for an answer, but have come up with nothing, however I noticed that there was an ESC key bug with full screen preview in PSP x3, and having a visible cursor would allow one to exit full screen without having to press a key. Could this be why the cursor is now visible? Now that I think about it, I've always been able to exit with either the ESC key or a mouse click. Still, this is something I've never seen before in any version of PSP.
I may sound like an idiot, but I'm confussed about this full screen mode. I'm taking a digital imaging class and we use Macs and PScs there. At home I have a PC with PS7. In school, I can work in full screen mode and pan the image out from under the palettes. I can't do this on my home PC. Is there a way to make this work or is it a Mac or PScs feature?
When I open an Illustrator document it opens full screen - meaning the top left corner of the document is at the very top left of my screen, (behind my tools) - and the bottom right is at the very bottom right of my screen (and behind my palettes).Is there a preference setting so that a file would open in the middle of my screen - NOT full screen?
