AutoCAD Inventor :: Saving Multiple Drawings To DXF?
Dec 22, 2011
Can I save multiple drawings to dxf in same time? I`m so tired to click "save copy as" with every drawigs. Autosave with flat pattern is not an option because orientation of the piece is so bad so many time of the cases
View 9 Replies
ADVERTISEMENT
Mar 27, 2012
I have a multi sheet drawing I am creating. My BOM is on the first sheet.
I have noticed that when I place views on my subsequent sheets, the balloons restart from item 1 again. Is there a way to link them to the BOM on sheet 1?
(Colossians 3:23-25)
View 4 Replies
View Related
Oct 18, 2011
I've created an iPart (for this discussion, lets just say a cube..)with 6 variations of the same part (its height has a choice of 6 different values in the iPart table)..I've created a drawing (idw) which dimensions the cube in one of the 6 instances..
..Is there any way to replicate the drawing another 5 times, with each referencing each instance of the iPart?
I was imagining copying the drawing 6 times and change each one to look for a different instance (a bit like when you go component - replace in an assembly..) then the drawing to automatically update the altered dimension.
this would save me producing and re-drawing 6 separate idw files for the same thing where only one dimension changes each time!
View 4 Replies
View Related
Aug 15, 2012
I've got a drawing that is 14"x12" and have a printer that can only handle 8.5 x 11 sheets. I need to print it out full scale because I plan on using the drawing to cut something out. In school, I have seen my teacher print the drawing across multiple sheets, and then he simply tapes the sheets together. I have tried every configuration possible and have had no success.
View 1 Replies
View Related
May 2, 2013
In testing my latest automation project, I've found that I can't save copies of a part multiple times (after deleteing the files off the disk) unless I close out of the top level assembly document, and reopen it. I used Process Monitor and determined that Inventor is trying to save to an existing file instead of creating a new file.
Inventor 2013 SP 1.1
View 1 Replies
View Related
May 4, 2013
We use a similar sub-assembly in almost every assembly we design. So what I would like to do is make a template from this sub-assembly that I can make adaptive, constrain to the proper parts and have it resize to the main assembly. I've been trying to do this for a few weeks now with little success.
I have seen tutorials make adaptive part templates but never adaptive assembly templates. Is this even possible?
I know you can't make individual parts adaptive to multiple assemblies without saving each part as a different file and I think that's where my problems are coming from. Even though I save the template as a different file is it still referencing the original adaptive part in my library folder? If so, is there a way I can make it not do that? I may be way off base there too I don’t know.
View 7 Replies
View Related
May 20, 2012
we are using acad 2006 to create drawings and saving them in dxf on 3.5 inch disc we then import the drawing into winner90 software on our router m/c but get the same response each time on loading - too many lines in iso file-
View 3 Replies
View Related
Oct 23, 2013
When I am working on several drawngs at the same time, I use the Publish command to plot them as a group. However to save the settings as a DSD file for future use, every open file needs to be saved. Why is this? Is there a way to disable that requirement?
There is no reason I can think of besides "by design" for this. The DSD file is only a list of drawings and their plot settings and is not dpendent in any way I can think of, to whether or not one its drawings is open and not saved.
View 7 Replies
View Related
Aug 1, 2013
I am trying to write some VBA code to print several drawings present in a folder.
I am not a VBA expert. I wrote some little macros in excel but it is the first one in Autocad.
I have a small code that opens a drawing, counts it, closes it and then loops for other drawings.
I have a code that print a drawing by defining some printing parameters.
Separately, both work. But when I call the second one into the loop, I get a error:
"Run-time error '-2147418111 (800100001)':
Automation error
Call was rejected by callee."
I'm using Windows 7 and Autocad 2012.
See my code below:
Option Explicit
Dim filename As String
Dim filepath As String
Dim full_filename As String
Dim i As Integer
Sub print_trial()
[Code] ......
View 2 Replies
View Related
Jul 6, 2011
I'm having some trouble while copying between drawings. I am attempting to merge a number of floor plans which are all saved as seperate drawings into 1 drawing. However whenever I copy the floor plan over to another drawing, some of the lines/objects seem to be displaced.
View 4 Replies
View Related
Dec 4, 2013
I am new to AutoCAD and have to export many drawings to PDF format to send them out to clients. I was wondering if their was a Macro or some other way to export drawings into pdf form without having to open each file and pressing export to pdf button?
View 9 Replies
View Related
Sep 5, 2007
I am trying to plot multiple drawings all at once. I work with many drawing sizes varies from size A to size E. What would be the best way to plot all drawings to 11 X 17 paper no matter what size the drawings are set to? These drawings are not xref or anything. They all are separated files. I tried using Set Sheet Manager; it will only plot to whatever that size is. I want all drawings to be plotted on 11 X 17. I did some research in the forums here and was not able to find what I was looking for.
View 2 Replies
View Related
Jan 28, 2013
I've started having a problem with the Publish command when publishing multiple drawings to PDF.
When I plot a drawing using the plot command, I don't have a problem.
When I publish one drawing using the Publish command it is also fine.
It is only when I try to publish multiple files that the problem occurs- the PDFs are produced, but the it is as if the drawing contents (paper space) has been shifted up by 10mm or so, cutting off the top of the drawing, and creating a larger margin at the bottom of the drawing. I use exactly the same page setup as for the single drawing plot.
There seems to be no setting that would change this, and the fact that publishing a single drawing works suggests that there is some kind of bug. At the moment i have to plot every drawing individually (or get my colleague to do it- it works fine on his machine, same page setup file!)
See attached example.
View 8 Replies
View Related
Dec 21, 2013
Combining multiple drawings in one go, I have 100 drawings (each has its layout) stored in 100 dwg files. I’m wondering if there is a way to combine them in one dwg file in one go assuming that they don’t overlap.
I need then to edit the title block of all of these layout knowing that this title block is an Xref.
View 5 Replies
View Related
Nov 4, 2011
I'm running ACAD Map 3D 2009. I have to run ONE custom macro on a number of drawings that are stored in a particular folder.
Basically all I need is to:
open
run custom macro
close
go on to next drawing.
I just don't know how to write LISP.
View 3 Replies
View Related
Aug 18, 2008
I have multiple cad drawings (300 *dwg's)that need some items changed, is there a way to seach multiple cad drawing in my project for specific instances of text in each drawing?
Do the drawings have to be open? Can you seach just thru the project with out opening each drawing, how does this work?!
View 9 Replies
View Related
Dec 5, 2013
I have amended our drawing frame (a block) in our templates so I now have a set of 82 I need to amend the frame in. So is there a easy way of redefining a block in a number of drawings or do I just do each drawing separate ?
View 3 Replies
View Related
Jul 5, 2011
I'm weaning myself off of Adobe's PDFMaker and learning how to publish.
I've got everything working but I'm prompted at an Adobe prompt (Save PDF File As...) for every sheet
which is overwhelming when I have multiple drawings with multiple sheets.
I don't know how (or if it is possible) to make it just save to the default name and continue onto the next one.
View 3 Replies
View Related
Aug 26, 2013
I usually open several drawing and use"drag and drop".
But something has happened.
Now, I can only open one drawing at the time. When I try to open the second drawing, the program close down the first.
What have I done ? and what shell I do ?
View 6 Replies
View Related
Jan 31, 2002
I need to change a text item in about 200 drawings. I would rather do this at one time if at all possible.
View 4 Replies
View Related
Jun 3, 2011
Is there a way to copy a viewport with all its layers setup from one drawing file to another drawing file?
I can copy the viewport and activate it, but the layers setup for that viewport goes to default. So it turns everything on.
I can't make a layer state in the old file and import in new file, because the new file does not have all the same layers. So not all my layers would be turned off in the viewport.
View 4 Replies
View Related
Jan 14, 2013
I am working on Data compliation and trying to extract data from multiple AutoCAD drawings. The data extraction wizard works well and extracts all the data from the drawing. I wish to segregate the data and want some certain set of data e.g. in P&ID drawing, I need only instrument Tags which are connected to DCS and likewise...
Is there any way to filter such kind of data and get the required results?
View 3 Replies
View Related
May 13, 2010
I have to revup a heap of drawings by modifying the drawing block of each drawing (simplying changing Rev C to a different letter ) and adding in todays date. Is there a quick way i can modify all drawing blocks without opening and modifying each drawing manually? Unfortunately, the drawings are all standalone and dont reference an external drawing block.
I am using Civil3D 2010
View 9 Replies
View Related
Jan 6, 2012
I am trying to change text in hundreds of drawings. What I have is a line of text say "the brown fox" and I need to change it to "the black dog". I have probably 1500 drawings I need to do this in. I am not versed in scripts of lisp. I know the ACAD commands to do this but could develop a script file to batch this.
View 3 Replies
View Related
Nov 15, 2011
Currently when I open up multiple drawings (opening them up one at a time) they all appear in the same window (one instance) of AutoCAD.
I want each drawing to open in separate instances so I can view them on separate monitors (and close one without being asked to close them all).
I have tried changing the SDI system variable from 0 and 1 (and vise-versa)
I have tried changing the windows default program from AutoCAD Application to AutoCAD Launcher (and vise-versa)
I have set the TASKBAR system variable at both 0 and 1 (and vise-versa)
Windows 7
AutoCAD LT 2012
View 9 Replies
View Related
Feb 25, 2013
I am trying to import a sheet with multiple drawings on it from AutoCAD to a sheet in Revit but when I do so all I get are the lines showing the AutoCAD sheet and the drawing labels but no actual drawings. I have done this before and can't figure what is going wrong. I have the import options set to color: black and white, levels/layers: specify and unit: inch. I also don't have AutoCAD on my workstation and it is a very large hotel project with hundreds of specific details and sheets that I do not want and do not have time to change or redo.
The DWGs I have are all set up as sheets and I don't have any individual details or drawings of the project not already set up as an AutoCAD sheet. I thought I could make the process simple by just importing the DWG sheet with all drawings to a Revit sheet at the correct scale, explode the layers, delete what I don't need and be done, this is NOT the case. Also I can get access to AutoCAD on another workstation after hours .
View 2 Replies
View Related
Jun 16, 2013
we got the big size file (file A), we fix it then we copy/ paste information (e.g. texts) from the other bad file (file B). File A becomes big size again although texts were copied is simple.
Question : How the best to copy these texts?
View 9 Replies
View Related
Apr 10, 2006
Is is possible to "que" a bunch of drawings to be plotted? I would like to be able to open a drawing and plot it, then while it's plotting, open another drawing and plot it, then another and so on and so on. However, I get an error message stating that another plot is in process and only one plot or publish process can be active at one time. Thus, I'm forced to wait for the last one to complete before sending the next one to the plotter.
View 4 Replies
View Related
Jan 3, 2013
I'm fairly new to the AutoCAD API for .NET, and for the last month or so I've been googling about, looking for comprehensive documentation on the Autodesk API (their equivalent of man pages). I've yet to find anything that describes each method and class in the API.
My goal is this: I'm trying to figure out how to copy the contents of all drawings in the same directory into a single dwg file. What subsets of the AutoCAD API should I use to do so?
View 5 Replies
View Related
Nov 28, 2013
i use Autodesk Autocad 2014 , version 18 I have the following problem I open one drawing and start my work Then i open another one and the first one gets delleted , the sheet remaining empty.
View 9 Replies
View Related
Feb 10, 2010
I had a set of drawings that I needed to redefine a block in and had to go into each drawing and redefine it seperately. Is there a way to redefine it once and then possibly select the drawings this block is redefined in?
View 9 Replies
View Related