AutoCAD 2013 :: Copy Object In X Direction Using Y Displacement
Nov 14, 2013
If I am copying an object using snaps vertically down a wall a certain distance and come to a wall corner and then need to copy the object the same distance horizontally as I did vertically is there an easy way to enter this new direction? I keep thinking that I would just enter displacement and for X I should be able to use my mouse and snap/measure the old Y distance and then put Y,Z as 0. However, there is no option to get a relative distance in displacement. Is there something I am missing in the command?
View 8 Replies
ADVERTISEMENT
May 14, 2012
i found the problem of dimension when moving the whole object inclusive the dimension to any direction.
View 2 Replies
View Related
Oct 16, 2012
When I try to Copy & Paste an object from one file to another, appears following alert window: “This application has detected a mixed version of AEC objects participating in this operation. Newer AEC objects will be disallowed from participating in this operation”. And I cannot paste the object copied from other file. This happened to me when I work with Autocad2010 using drawings saved as Autocad2004 in Autocad2013.
Since I am working in a group of people that have different versions of Autocad, I need the solution for this problem.
View 5 Replies
View Related
Nov 5, 2013
I'm wanting to know if there is a way to Copy a selected area from Excel and Paste into Autocad and have it as lines and text objects?
Before everyone is entering the information in RED multiple times, once in excel and again in our cad file.
I don't want a data link because we are sending, only, cad files to our customers.
View 6 Replies
View Related
Dec 8, 2011
I am a beginner for CAD Drawing and a want to scale an entire drawing in just one axis without modifying the dimensions in other.
scale the attached drawing document along X axis by reducing the lenght to be fit into an A4 sheet. Without compensating the markings' visibility.
View 4 Replies
View Related
Jan 1, 2014
I am trying to extrude an object in the negative Z direction.
Easy to do at the command line by putting a "-" sign before the distance to extrude the object but I'm having trouble in autolisp.
Define points for polyline for valence
(setq p1v p1)
(setq p2v (polar p1 (DTR 0.0) box_width))
(setq p3v (polar p2v (DTR 90.0) val_thick))
(setq p4v (polar p1V (DTR 90.0) val_thick))
;-- Create valence polyline
;-- Draw the polyline for the valence
(command "pline" p1v p2v p3v p4v "c")
;-- Assign the new part a variable name
(setq cab_valpl (entlast))
THIS IS THE PART I'M TRYING TO FIGURE OUT BELOW ....... WHAT IS THE SYNTAX TO EXTRUDE "VAL_HT" IN THE NEGATIVE DIRECTION?
;-- Extrude the polyline to make the valence
(command "extrude" cab_valpl "" val_ht "0")
View 6 Replies
View Related
Aug 19, 2013
I have a polyline that meets itself back at the beginning. It should be closed and appears to be. I joined several lines to get the polyline. When I try to offset it I can only offset towards the inside and not the outside. Is there a reason for this or am I doing something wrong?
View 9 Replies
View Related
Apr 4, 2013
Is there anyways to change the scroll direction on the trackpad of Mac 2013 Autocad? I like Autocad but I don't like how it uses the "natural" scrolling even with it turned off in OS X. It is just weird having your OS work one way but Autocad work the opposite.
View 1 Replies
View Related
Jun 21, 2012
How to switch the direction of text arrows?I’m wondering if there is a way to switch the direction of the text arrows from being left directed to be right?
View 4 Replies
View Related
Nov 6, 2013
Flipping the direction of the constrain dimension,
I couldn’t figure out how to flip the direction of the constrain dimension (attached) while working in the block editor environment.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
View Related
May 25, 2012
Direction of the "Auto Number" command
How to control the Auto numbering to start:
From left to right OR from right to left?From up to down OR from down to up?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 8 Replies
View Related
Jan 3, 2013
I'm using AutoCAD 2013 that came with Building Design Suite (Revit) and the copy command terminates after making the first copy, instead of continuing to make multiple copies until I terminate the command. Is there a switch to control this? A sysvar?
View 2 Replies
View Related
Apr 21, 2013
I have a 3D file (not of my creation) that gives me some problems when I try to copy it (it is a 3D building).
The problem is that, when i click on "copy" command, I can select a point but then AutoCAD crashes and it takes about 30 seconds to return working a normal way and permit me to paste it. (it happens with "move" command too)
Otherwise, if I use "copy with base point" I have no problems: after a second I can paste it where I want.
How can it be possible? Cause if sometimes I mistake and digit "copy", I always have to wait the long Autocad response.
This problem happens with both autocad 2012 and 2013 and it doesn't happen with other 3D files I have. The drawing is made mainly of meshes.
I have a Dell notebook and a NVIDIA Quadro 2000M video card, so you can understand I don't like this problems: I spent a lot of money for something I hoped could work well with AutoCAD.
About that, aren't there drivers for the graphic card? Cause when I click on "check for updates", autocad says me that there are newer version of the driver, but then it says me that it is impossible to update it (I have a connession and a student version).
View 4 Replies
View Related
May 17, 2013
I have created a linetype with the text GAS OPTION in it. The line is continuous with a break around the text. In a straight line the linetype works fine (breaks around the text etc). However, when I use a polyline and spline the line for a curved line the text aligns with the direction of the line at the start, but when the line bends, the text suddenly changes direction and reads in the opposite direction. It looks like AutoCAD is trying to keep the text upright rather than following the direction of the line. When the text changes direction it also changes its insertion point and overlaps the continuous part of the line. I have 2013 AutoCAD.
Here is the string I used for the linetype.
*GAS_Option_LINE,Gas line ----GAS OPTION----GAS OPTION----GAS OPTION----
A,8,-15,["GAS OPTION",STANDARD,S=2.54,U=0.0,X=-2.35,Y=-1.27],-12
View 2 Replies
View Related
Jan 2, 2014
I have cut several sections at different points along a road alignment. The sections are cut facing the same direction as the alignmnet. Is there a way to reverse the section direction without changing the alignment direction?
View 6 Replies
View Related
Feb 18, 2013
How to flip the direction of dimension constrains in “block table”,
In the screenshot below, the default direction of dimensions constrains are given in the direction of digitizing (by design)
How this direction might be flipped?
For example, in the ArcGIS software, one can see the direction of digitizing as well as flipping it
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
View Related
Apr 21, 2011
I have a drawing of a stone railing section and I have to change direction in the run direction of the baluster panel. Is there a way that I can move the details without changing th Y direction of the details. Please refer to the attached CAD file for details. I am trying to avoid having to redesign the panels if possible. railing detail.dwg
View 6 Replies
View Related
Sep 22, 2013
I have a box with a logo on it. I need it to float in the middle of the screen and slowly rotate in random directions on a continuous loop. I'm not good at scripting, but I know there must be an easy way to do this.
View 1 Replies
View Related
Dec 20, 2013
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
View 9 Replies
View Related
Mar 19, 2014
I have a path with a smooth point. The two direction points form a direction line with any non-45-degree-angle - say 11.8 degrees. I want to drag one direction point while keeping the angle of exactly 11.8 degrees.
Is there a key combination for that (Mac OS)?
View 17 Replies
View Related
Apr 12, 2012
We just got our new 2013 disks and I was going to make a backup copy like I usually do (it worked for 2012) and my backup software says there is not enough room on a standard DVD-5 to fit. So did Autodesk use some copy protection or did the install disk get so big it must go on a DVD-DL?
View 6 Replies
View Related
Dec 11, 2012
why doesn't the arrow leader disappear when I flip my arrow direction to the inside..
see image
View 1 Replies
View Related
Aug 28, 2002
I have object data attached to some linework and I want to copy that data to some new entities.Is it possible to copy object data from one entity to another with out having to fill in the table again.
View 3 Replies
View Related
Sep 19, 2012
when the Prosteel Object Enabler for AutoCAD 2013 will be available.
View 4 Replies
View Related
Mar 20, 2013
Trying to utilize a .sid file within Standard AutoCAD 2013, all suggestions point to an Object Enabler but notice that for 2013 all are for Civil 3D, Plant...
Is there an object enabler for Standard 2013?
View 7 Replies
View Related
May 25, 2013
I have a project for school that I am trying to complete at home, but realized that I don't have the proper SUD file at home. Is there any way I could copy and paste the already dimensioned object into the new SUD later?
View 1 Replies
View Related
May 1, 2013
I'm using AutoCad LT 2013 at work. My issue is I have always been able to highlight and object and then enter my command and perform that command. Something happened and now when I highlight then enter my command and press enter it un-highlights the object and prompts me to highlight the object again. Also if I want to copy and paste a highlighted object it wont allow me unless I type in the command first. I can't figure out what I did.
View 4 Replies
View Related
May 30, 2013
When I use the copy tool, not copy and paste, the object that I copy doesn't show up. I click on an object click the copy took then click in the location where I want the new object, nothing shows up. Then if I save the drawing, close and reopen it, the object will be show up in the new location. It sometimes happens with move and rotate. I'm using 2013 64 bit version on Windows 7.
View 2 Replies
View Related
Jan 1, 2012
I have a map of an island. I am trying to copy and object say a block or triangle into the certain areas of the island several times. How can i do this using the command.
View 4 Replies
View Related
Feb 29, 2012
Is there anyway to copy an alignment from one drawing to another?I want to copy the alignment but not have it come in as a alignment just an object line
I don't want to spend the time drawing a PL over the top of it (its a very complex) then copying that.
View 4 Replies
View Related
Nov 13, 2011
The assembly in the attached files was working fine in 2011, then for some reason it stopped updating. So I opened and saved in 2012 and it still doesnt update.
Open the assembly, edit the extrusion in Copy Surface Master and change the distance to 500. You can see that the copied faces do not update in the other parts, but there are no error warnings.
I logged with my VAR and they said use derive instead and closed the ticket. Sure derive is another way but copy object with associativity should work so this is my way of bringing to autodesks attention.
View 9 Replies
View Related