AutoCAD 2013 :: How To Flip Direction Of Dimension Constrains In Block Table
Feb 18, 2013
How to flip the direction of dimension constrains in “block table”,
In the screenshot below, the default direction of dimensions constrains are given in the direction of digitizing (by design)
How this direction might be flipped?
For example, in the ArcGIS software, one can see the direction of digitizing as well as flipping it
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
ADVERTISEMENT
Dec 11, 2012
why doesn't the arrow leader disappear when I flip my arrow direction to the inside..
see image
View 1 Replies
View Related
Nov 6, 2013
Flipping the direction of the constrain dimension,
I couldn’t figure out how to flip the direction of the constrain dimension (attached) while working in the block editor environment.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 4 Replies
View Related
May 14, 2012
i found the problem of dimension when moving the whole object inclusive the dimension to any direction.
View 2 Replies
View Related
Jul 24, 2013
I sent the following message to autodesk:
Issue: Dynamic Block causes crash
Preface: A dynamic block c/w a "flip" parameter and a multiline attribute will crash when the block and attribute is flipped, and the attribute justificatiob modified.
Explanation: When the dynamic block is flipped, the multiline attribute is also flipped causing its justification to switch from "top left" to "top right". When the attribute is edited in the in-place attribute editor to switch the justification back to "top left", it causes AutoCAD to crash.
Workaround: Instead of using the in-place attribute editor (i.e. same as MText editor), the attribute justification is changed by modifying the attribute properties in the "Enhanced Attribute Editor" dialog box - on the "Text Options" tab
View 1 Replies
View Related
Mar 7, 2012
The “regular dimensions” are not changed as the “constrains dimension” are!
I’m wondering why the “regular dimension” don’t change automatcislly as the “constrains dimension” change?
Do we really need to re-make all the regular dimension manually? How does this increase the performance and the integrity of the work?
Is there some workaround to have the “regular dimensions” change as the “constrains dimension” do?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 5 Replies
View Related
Sep 4, 2012
We use a number of blocks with block tables for data extraction here, and whenever one of the blocks is modified and updated, all of the block tables reset to the default value. This happens for any block reference change, not just changes to the block table (which makes sense that it would reset).
How can we update these blocks without having to manually change all of the block tables afterwards?
View 2 Replies
View Related
Aug 14, 2013
The tube is a part of something bigger but this particular part is confusing me. When I want to change Distance 4 (in block editor you will see) and the tube diameter has change (something impossible in real world ). I have try to use constrains in block editor - for now without any succes.
tube_block2.dwg
P.S. I have tryied mline, it works, but I wonder if it works without mline (I don't like them).
View 5 Replies
View Related
Jun 14, 2012
I have a special ditch profile that I'd like to use a linetype with arrows on. Currently, it shows the arrows going up station with my mainline profile. i.e. now water does flow uphill...
How can I flip this line?
View 9 Replies
View Related
Sep 10, 2012
Any work around for rectangular patterns in assemblies?
I want to pattern a screw using an existing Part Feature Pattern; I have figured out depending on how the part is assembled you get two outcomes and if the part is mated opposite side to how the feature was patterned you get the parts going the wrong way (see attached pic).
Is there a “flip direction” option anywhere or do you just have to be super diligent on how the seed feature orientation is in relation to the assembled pattern?
View 9 Replies
View Related
Feb 15, 2013
Deleting ONE of the constrains (not all), I wanted to delete one of constrains but sound that the available commands delete all constrains!
How might I be able to delete juts one of the constrains?
View 2 Replies
View Related
Feb 17, 2013
Modifying objects with constrains deletes the contains,
In the screenshot below, the two lines have the “equal” constrains. One of them is extended and thus both lost the “equal" constrains!
How objects can preserve constrains while being modified?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
Sep 11, 2013
Today i have a new thing appearing close to my picking box inside autocad. I believe it has some relation to infer constrains options.
I go into infer constrains then i can remove some pop up box but i can't remove the blue icon you can see inside the image close to the pickbox.
How can i remove this blue icon?
View 3 Replies
View Related
Dec 11, 2012
Is there a trick in using a dynamic block in a table cell? When a dynamic block is inserted into a cell, any visibility can be viewed (Properties Manager) in that cell if the visibility state has a block in it. What happens if the visibility state does not have a block. That is, if the view has exploded block so one can use parts in actions etc? Can I view ANY state in a cell regardless if it has a block or not? Or must the visibility states have blocks to be able to use it in the table cell?
View 2 Replies
View Related
May 19, 2012
How do we flip the dimension numbers from one side of the line to another?
My dimension always appears on the left hand side for a vertical line and on the top for horizontal line... Can I make them appear on the bottom or right side?
View 3 Replies
View Related
Sep 5, 2013
I'm trying to flip an arrow head dimension so that it appears within the two dimension lines pointing outwards. I understand that in previous versions of AutoCAD you could just right click -> flip arrow heads, but this version (AutoCAD Electrical 2014) seems to lack this feature...
View 9 Replies
View Related
Oct 23, 2011
I have an ipart. One dimension is either some value or null.It is a variable in the Table. For instance I have 6mm down from Center point in part A. Than I switched to zero for Part B and if I go back to 6mm for Part A the dimension is now above the Center Point. How to make the dimension stay as initially assigned?
View 1 Replies
View Related
Mar 20, 2008
When I put a flip option on a text in Dynamic Blocks, during the flipping the text is mirrored. is there any way to preventing this?
View 9 Replies
View Related
Mar 28, 2012
I'm having a small problem with creating a flip state for a dynamic block that has 3 visibility states.
The visible/invisible parts of the block won't flip even though I have created 3 flip states (one for each visibility state) and selected all of the parts of the block I want to flip each time.
View 5 Replies
View Related
Jun 21, 2013
I have created a pretty nice dynamic door block with flip parameters - size changes - and visibility parameters for jamb/no jamb. However I would like to add an option for changing the door from 90 degrees, 45 degrees and closed. I can't use the visibility parameter since I am using that for jamb/no jamb option. I was hoping to add a rotate parameter, but am having issue with the arc line. Is there a way to have the arc move with the swing in the door? If so, I can add that to the more refined door block. I have attached Drawing 2 (Door with just the rotate parameter) and Drawing3 (More refined door dynamic block without the swing option).
View 8 Replies
View Related
Jul 11, 2012
I designed a dynamic block to represent the profile of boreholes, and its different layers (depths, in profile) are linked to the respective description text by a leader.
Problem is when I flip the text with its leader, the tip of the arrow loses contact with the borehole. And as I flip more times, the further it gets from its original position.
View 1 Replies
View Related
Apr 27, 2012
I'm trying to make a dynamic block with attribute text. I've made a FLIP action to it but the text will not follow.
In the Command Window i get this text
Select objects: Specify opposite corner: 16 found
Select objects: 6 unlocked AttDefs filtered from selection.
View 0 Replies
View Related
Nov 23, 2011
My boss gave me a copy of Autocad 2012. I've messed around with architecture 2010 before so the ribbons are no surprise. One thing I have noticed that's really different is the dynamic block constraints & block table actionblock properties table? I looks very similar to the lookup property table
View 0 Replies
View Related
Oct 29, 2008
I have a section marker with some text with it and when i make it a dynamic block and try to say flip it it will only take the circle and line with it and leave the text with attributes.
View 9 Replies
View Related
Mar 7, 2013
It's about "Block Properties Table",I want to use a Block Properties Table to manage a Dynamic Block.
I have defined a Dynamic Block a and its Block Properties Table in Autocad2010,this is the screenshot of the Block Properties Table(a1:d1=100,d2=200;a2:d1=100,d2=400;a3:d1=100,d2=600.) Now I want to insert the Dynamic Block using .NET API.after I input a command,the block of a2(d1=100,d2=400) is inserted. I have the code about it, but the code is not complete. this is the Dynamic Block
this is the the screenshot of the Block Properties Table .
the result:
the code about it:
[CommandMethod("readBlockTable")]
static public void CmdReadBlockTable()
{
Editor ed = Application.DocumentManager.
MdiActiveDocument.Editor;
// select a block reference
[Code].......
View 8 Replies
View Related
Aug 25, 2011
So I'm creating a block with a block table and constraints. The constraints such as Geometric Constraints work just as assumed. When adding in dimensional constraints we start to have more fun. So I have dimensional constraints that use other dimensional constraints to manipulate itself.
EX. dimconC = (dimconB-dimconA)
dimconA is 12
dimconB is 14
dimconC would be 2
Now when ever dimconA or dimconB change dimconC would populate accordingly.
With this I wanted to make an attribute that could be placed in instead of a dimensional constant.
EX dimconC = ((Att1*dimconB)-dimconA)
Att1 is 02
dimconA is 12
dimconB is 14
dimconC would be 16
However when trying to place in formula that references a attribute I keep getting an error "A DEPENDENT EXPRESSION CANNOT BE EVALUATED" So I assumed it was missing an expression from the attribute, however once entering an expression in for it I still get the same error.
(full error message attached)Constraint_Error.JPG
Is this something that is not allowed at all or have I over looked something?
View 2 Replies
View Related
Jan 18, 2012
What are all the block table records?
I've got Model Space & Paper Space(Or Layout Space) under control.
I've got two block reference instances of the same block on a drawing.
If I purge the Drawing the older duplicate block reference disappears.
7867 is the older reference that disappears when I use the purge command.
78A7 is the newer reference, I only want to see this one on my extraction of attributes.
What property of the block reference will tell me that it would be purged if I used the purge command?
As I want to detect what's the old block and which one is the current block reference.
The problem is I only want to extract the attributes from the newer block reference.
The old block reference is coming up... how can I filter that out of my loop results?
I know I could just purge the drawing and my problem would be done with.But I need to do this in a manner that only accesses the drawing from a read-only manner.
View 7 Replies
View Related
Dec 17, 2012
Please take a look at the attached dynamic block.
I have two flips in there, one verticle, one horizontal. For some reason, whenever I tell it to flip, and then select everything in the block, it doesn't flip the other flip's arrow.
Then, when I created the second arrow, and went back to include the first flip in the second flip's Action Selection Set, it doesn't pick it up. Doesn't matter if I do "modify selection set" or "new selection set"... doesn't matter if I select everything within (blue box) or everything that touches (green box).
Yet, when I highlight the icon box, it shows everything is selected.
Can flips not flip other flips?
Additionally, I want the rotation parameter to flip on the horizontal flip (so it stays outside the block), but I can't get that into the selection either.
What am I missing with these selection parameters?
View 5 Replies
View Related
Sep 30, 2013
How to create dynamic block with array action in both X and Y direction? And I have some conditions there like number in horizontal and number in vertical directions, but on exact distance (like 5 elements on 20 cm).
View 1 Replies
View Related
Apr 23, 2012
I have a drawing of a sheet metal part that I did late last year. I used a Hole Table to dimension all the holes.
Fastforward to today. I added two holes that are different in size than any other hole. So when I opened the drawing it automatically added them to the Hole Table and gave them tag #'s in a new group and it kept the grouping in Alpha order. A, B, C were there before and it added D. Great, that's the way to do it.
Then I decided I needed to change the hole size. The change would keep the size different than any other hole on the part still. I go into the drawing and it change the size in the Table BUT, it also moved them up to the top of the list but kept the tag # as D*.
How do I get those two entries back to the bottom where they belong to keep them in order?
View 1 Replies
View Related
Aug 15, 2012
I'm an architect and I'm drawing up a development of 80 houses and I need to provide a Sales Plan which includes the width and length of each rear garden in the development. Rather than show these as actual dimensions on the drawing (which will get messy and make the drawing look untidy due to the large amount of units) I plan to create a simple table with plot number and dimensions.
My plan is to dimension the gardens on a non-printable layer and to insert a field into a table to obtain the required dimension. I've done this for the first few houses but I have to insert one field and then select the dimension to get the "m" dimension and then repeat the process in order to get the "ft" dimension.
My question is is it possible to insert a field (or two separate fields) that will display the dimension once in m (ie 12.80m) and once in 'architectural dimension style' (ie. 41' - 7 1/4") by only clicking on the dimension once??
This will save a lot of time as this size of development is quite common for me.
View 4 Replies
View Related
