Today i have a new thing appearing close to my picking box inside autocad. I believe it has some relation to infer constrains options.
I go into infer constrains then i can remove some pop up box but i can't remove the blue icon you can see inside the image close to the pickbox.
How can i remove this blue icon?
Deleting ONE of the constrains (not all), I wanted to delete one of constrains but sound that the available commands delete all constrains!
How might I be able to delete juts one of the constrains?
Modifying objects with constrains deletes the contains,
In the screenshot below, the two lines have the “equal” constrains. One of them is extended and thus both lost the “equal" constrains!
How objects can preserve constrains while being modified?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
How to flip the direction of dimension constrains in “block table”,
In the screenshot below, the default direction of dimensions constrains are given in the direction of digitizing (by design)
How this direction might be flipped?
For example, in the ArcGIS software, one can see the direction of digitizing as well as flipping it
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
How do I remove a white border for an icon? I'd like to keep the clarity of the icon.
View 2 Replies View RelatedThe tube is a part of something bigger but this particular part is confusing me. When I want to change Distance 4 (in block editor you will see) and the tube diameter has change (something impossible in real world ). I have try to use constrains in block editor - for now without any succes.
tube_block2.dwg
P.S. I have tryied mline, it works, but I wonder if it works without mline (I don't like them).
I have just upgraded from PSE 5 to PSE 9 and cannot find a file count on the Browser as in PSE 5. How can I remove audio icon from photos, I don't know how they got there to begin with.
View 5 Replies View RelatedI have a tool bar for all the macros that I use regularly.
While we can add shortcut icon onto the tool bar by simply drag and drop, I couldn't figure out the way to remove icon from the tool bar.
I get these pink points in my sketch for the frame. How do I get rid of them?
Right click and delete doesn't work. I get all sorts of errors because of these.
I'm working on a design for an Outdoor Slat Chair and when I try to constrain the slats to the side of chair (3/4" extrude) they end up constrining off in mid air. I believe they are constraining to the center points of the arcs and fillets used to create the chair sides. Does this make any sense and if so, how do I get around this issue?
View 3 Replies View Relatedi have an offline icon on my pics in elements 11 organizer after i remove the sd card from the reader
View 2 Replies View RelatedA co-worker has been having issues with the ucs icon location. In a front view of his model the UCS icon appears where expected. when shifted to a top view the icon shifts over to the right from the location it was at in the front view? What is causing it?
View 2 Replies View RelatedI am running AutoCAD 2013. My issue is that the top row of icons (New, Open, Save, etc. and all of the Autodesk 360 info) have become nearly invisible. If I hover the cursor over the icon it tells me what it is and I know I am clicking in the correct area. I think it was some sort of background transparency issue, but can't remember where to reset that to opaque.
View 7 Replies View RelatedWhen I select the UCS icon and right-click, I get a right-click menu, but there is no options for UCS there. I thought it should give me options regarding the UCS and the UCS icon. Using vanilla AutoCAD 2013.
View 7 Replies View RelatedOne of our clients would like different file icons for the .DWG and .DXF files. I have tried numerous ways of changing them (even went as far as extracting the icons from the "acadficn.dll" file where they are originally drawn from.
If I change the file icon for one file extension, then the other changes automatically.I would love to get some pointers.
The “regular dimensions” are not changed as the “constrains dimension” are!
I’m wondering why the “regular dimension” don’t change automatcislly as the “constrains dimension” change?
Do we really need to re-make all the regular dimension manually? How does this increase the performance and the integrity of the work?
Is there some workaround to have the “regular dimensions” change as the “constrains dimension” do?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have recently been fighting an override of some sort that doesn't want to go away. As an example, for basic copy command, I would normally select my object to copy, type C, hit the space bar, and select my object again to copy to new location. With this override, I select my object, type C, hit the space bar, and in the command line, this appears:
Command: c COPY 1 found
Current Settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] : c
In AutoCAD 2010, the UCS Icon settings dialogue window has a 'Cone' setting for displaying coned arrows at the end point of each axis. This 'cone' setting has been removed from 2011-2014. What logical reason why this was removed and is it possible there is a hidden setting to bring it back in 2014?
AutoCAD 2010 UCS Icon Settings dialogue & Resulting arrows on UCS:
AutoCAD 2014 UCS Icon Settings dialogue NO Arrows on UCS:
I'd like to have a special command (maybe a custom ) placed near the coordinates viewer.
(That is, at the status bottom bar)
I found that when I open the autocad using Classic view, the icon are dimmed as attache file, however, when I open it in annotation view, it is normal.
View 4 Replies View RelatedI thought there was a setting for this? I want to adjust the Osnaps so they appear further away from the point. IE: As I want to pick the quadrant I have to get so close to the quadrant before the osnap shows. I can't remember the variable to adjust this distance.
View 3 Replies View RelatedWhen opening a new drawing in 2013 the UCS icon isn't in the bottom left corner - how to correct ?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
How can i move the Object Isolation icon from its own bar, down to the tray as shown in the attached png?
View 2 Replies View RelatedEvery time I open ACA 2013, my toolbars that I have loaded turn off. Well currently only the layers toolbar remains, my custom toolbar and the properties toolbar turn off every time I open ACA with the icon or the exe file itself. If I open a drawing file the toolbars seem to remain. I also just installed the service pack, no change.
View 1 Replies View RelatedIn ACA 2011 I have the project browser icon. This is easy to find and use in the 2011 quick access toolbar.
When I open the "Customize user interface" I find and select "Project Browser", then I see under the properties of the command I only see "Display" and "Advanced" nothing else is listed. This command is quite odd compared to other commands.
However, in ACA 2013 this icon is completely missing, I cannot find it in the quick access toolbar, when I search in the "Customize user interface" command list, I cannot find "Project Browser" in the search field of the command list.
How do I find the command for project browser so that I can drag it / steal it from another .cuix file?
Bonus Question: How do I stop the sheet set manager from always showing up? I use the sheets tab of the project navigator all the time.
I have received a drawing with a a layer's print icon grayed out in the layer manager. I can print anything from that layer and I do not know how to switch on printing for that layer. What must I do and what does the grayed printer icon mean?
View 2 Replies View RelatedJust installed inventor 2013 and the icon to launch vault is missing from the ribbon where it used to be in v 2012. Also when i try to open a file the quick link to vault is not there. i have installed vault basic 2013 and it opens up fine and my files are in it. Do i have to create a link?
View 2 Replies View RelatedThis has been occuring since installing 2013 and it's not just on my computer, our other drafter has the same issue. Once it happens on one drawing it effects all open drawings and the only thing I have been able to do to get rid of it is to close out all drawings and restart AutoCAD. Attached is a screen shot since its' hard to describe.
View 2 Replies View RelatedI'd like to insert an adjust image tool on image context ribbon.
Civil 3D (2013)
The icon dispayed on the ribbon for my addin seems to be the large (32x32) icon and i'm not sure how to fix that.
In IV2012 it was fine and i can't find anything in the programming that suggests anything was changed.
Using IV2014 Pro SP1 update 1, Win7-64bit
i have aprblem with the main icons of the ribbon, i install the program and it works correctly Suddenly the user interface converts to the normal autocad i tried to restore the ACAD.CUIX and doesn't work.
i have Win8, the version i have of the program is 2014 and the problem also happen on autocad architecture.