Moving to a Windows 2008 Server x64 desktop and notice that when Lightroom is installed it's the 32bit version. On Vista x64 the installer automatically installs Lightroom 64bit. Is there a way to manually select the 64 bit version for install ?
View 6 RepliesIn Photoshop CS6 (64bit), when using the brush tool (with a brush with pressure sensitivity activated), I quite often get a line drawn at the max width selected, as if there was no pressure sensitivity. Everything goes back to normal after I start drawing another line, and happens again after a few lines. It's quite random. Â
Â
I don't have this problem in any other software (Illustrator CS6 64bit, Painter XII, Sketchbook Pro, Zbrush, ...). I have already checked and I've found some other users on other forums with the same problem.
One example, with a picture of the problem: [URL] Another one, exact same problem: [URL] Some of those users seem to have solved their problem by installing an old driver (6.1.5r3), but they had that problem with Intuos TABLETS in the first place, not a Cintiq 24HD... I have tried that, but unfortunately the driver is not compatible with the Cintiq 24HD.
 Â
To test this out: I've been able to reproduce the problem 90% of the times I've tried. if I keep the pen at 1 inch from the display so that it's still recognized by the screen but it's not drawing, then wiggle it a bit, and then I slowly move to the screen and tap it (as if I was starting a line with very low pressure), the problem appears and it makes a large dot, as if there was no pressure sensitivity. As I said the test doesn't work every time, but almost.
 Â
This is an image of what happens when I try and make dots in Photoshop. These are done trying to push the pen with the same (low) pressure. The big ones are from when the issue appears: [URL]Â
Â
I have tried the pressure test in the Wacom utility software and it seems to work fine, it never jump to full even when I try the method I've just described. In the diagnostic page of the Wacom utility software the pressure is always correct, even when in Photoshop there's the brush sensitivity issue.
Â
note: I've already tried to completely re-install my computer + the Adobe software + the lastest wacom driver for my Cintiq 24HD, and the problem is still the same.
My company is switching to a Windows HPC 2008 Server based platform and I wanted to know if we'll be able to run Photoshop CS4 Extended on this OS? The Microsoft site seems a bit sparse in terms of information on compatibility with existing applications.
View 3 Replies View RelatedWe recently migrated our fileshare project drawings from Window Server 2003 Â to Window Server 2008-R2 x64...We are experiencing slowness opening or only right click button on more dwg on XP Pro 32/64bit workstation.
Problem repeats if you try to copy many dwg files from windows explorer, right button properties..i have already disabled "validate digital signatures and display special icons" on each machine .There isn't any slowness problem opening files on other application e.g.. Office.Â
can you confirm if the CS4 version of illustrator will work on a 64bit version of Windows 2012 TS?
View 1 Replies View RelatedWhy can't Windows Explorer show thumbnail previews of DNG's on my Windows 8.1 64bit Pc. I assume is has something to do with not having the DNG codec. However, on Adobe's website it says their DNG codec only works on Windows 7.
View 4 Replies View RelatedI am trying to install the Photoshop CS4 trial version on Windows 7 x64. After the two files download I run the exe file and it extracts all the files from the .7z file. Nothing happens after that, and if I goto the extracted files and try to run setup.exe it says that windows cannot find the specified file, and I might not have sufficient permissions. I am running this under my account with administrator privileges though.
View 1 Replies View RelatedNow with Windows 7, on a completely new workstation I have exactly the same issue: When I start LR and select the catalog, everything works as usual. But when I double click on the *.lrcat file, or select one in windows the following happens: Lightroom tries to install itself! !!!!
Â
When I click on cancel, an error 1706 appears, "no valid source could be be foundfor product LR 4.1 64bit, the windows installer cannot proceed." To go ahead of an obvious question: the file type lrcat seem to be associated with the 64 bit Lightroom:
Trying to get my Canon 5D Mark II to tether. It is on the "good" list. But all I can get is "Camera Not Detected". Computer sees it ok. But LR seems to be oblivious.
View 1 Replies View RelatedI have loaded the software on my server but wont run. I get the following error details as follows: I have the dump file but not sure what to ddo with it or where to send it. Dont know how to attach it here either.
Problem signature:
Problem Event Name:APPCRASH
Application Name:vstudio.exe
Application Version:13.0.0.0
Application Timestamp:4cef14d7
Fault Module Name:kernel32.dll
Fault Module Version:6.0.6002.18449
Fault Module Timestamp:4da47967
[code]....
How to connect to SQL Server 2008 r2 by using Map 3D 2012? I can't to make it. It prompts the message "Invalid connection". I used the IP as the service name of map 3d.
View 9 Replies View RelatedJust installed CS6 on my new workstation and Photoshop; it freezes upon opening.Every other program I have installed has worked flawlessly, including the rest of the CS6 Suite and Lightroom 5.Both Windows and the Adobe Suite have all available updates already installed.Computer is a new HP Z420 Xeon Workstation, Windows 7 Pro 64bit, 16GB Ram.
View 15 Replies View RelatedWhen using LR 4.3 and 4.4 on Windows 8 Pro x64 and trying to export a jpeg file with the file size as the limit I get the error "Some export operations were not performed. The file could not be written <<NameOfRAWFile>>"
Â
This is only occuring with exporting files where the File Settings is set to Limit File Size to: <<zzzz>>K.I use 5000 as the default due to the limits of the site I am uploading too.
Â
Fails on my laptop and my desktop.
Upgraded OS from W7 (64bit) to W8.
Â
Using Canon Pro 9000 Mk2 printer, unable to select and print borderless prints of any size.
Â
However, using Elements 11, there is no problem which suggest the problem is confined to LR4.3.
Â
Have uninstalled and reinstalled the driver w/o success.
I have successfully installed on my desktop with similar config, but laptop install fails. I'm going to redownload the package and try again.
View 2 Replies View RelatedPhotomerge has been failing on this system. I at first thought it was down to insufficient registration with the images, but I realised it fails every time, so tried with 32bit PS and all worked OK. It loads the RAW files and builds the layer stack, and usually shows the 'Aligning files' message. Then the files disappear from the screen leaving Photoshop still running.
Â
I don't think it has ever worked with this particular installation on this machine.
Â
Win7 64bit Pro
3930K @ an easy 4Ghz
32Mb RAM (70% assigned for PS)
GTX570
Â
To recap, it works OK with PS 32 bit. I have tried starting from Bridge > Tools > Photoshop > Photomerge and directly from Photoshop File > Automate > Photomerge using open files.
I installed Revit 2013 in my laptop, but always showed me an error and revit closed. I reinstalled the windows on my lap top and downloaded revit again (Students version) but in the window installer don't appear enable the revit option.
View 2 Replies View RelatedWindows 7 OS, On a new laptop I loaded my trusty Creative Suite2, it failed to open, after I ran as administrator and manually entered the folder location C:progra~2adobe, CS2 loaded and runs fine. I now want to install Photoshop CS3 and I get a very early error message indicating Minimum Requirements not met...Windows XP SP1 and greater and Windows Vista, it then dumps me out.
View 3 Replies View Relatedregarding the installation of 2.6.10 usingthe unstable installer :
Is there a way on windows 7 64 bits to get rid of the following alert eachtime you are executing something :
quotethe procedure entry point gdk_win_32_begin_direct_draw_libgtk_only cannot befound in the dynamic links library libgdk-win-32-2.0-0.dllunquote
I updated my CS5.1 to 64bit when I upgraded my OS to Win 7. Now when I check for updates I get an error message U41M1C212 - server isn't responding. I checked firewalls and IE settings - both seem ok. I downloaded the latest update plugin but I get a message that mine is newer (and bigger) than it.
View 4 Replies View RelatedI have been using Illustrator CS3 for several years under WinXP, and have now upgraded the OS to WIN7. I am failing to install, whatever I do it comes back with the following error message:
Â
`The installer database is corrupt, if this continues .....'
Â
I had onscreen chats with Adobe's Vallen and (maybe) Sumar, who just sent me back to the Support page and forum page. Digging there I eventually found [URL] ....... and followed the instructions, including deleting the caps folder because neither of the database files were in it.
Â
There is a suggestion that I would get somewhere if I was disconnected from the internet. I am wondering also if removal of Photoshop Elements 10 would get rid of a conflict (I have already stripped out most other Adobe programs). I am pretty sure that before loading WIn7 I had been forced to uninstall CS3 for reasons of space, so I don't think ther should be an issue of serial nos.
I just upgraded my 3 year old Dell XPS 16 which came with a AMD (ATI) Radeon HD 5730 (1GB) graphics card to Windows 8 (along with a new SSD hard drive), and reinstalled CS6, and now I get messages that the program is no longer detecting my dedicated graphics card. I updated the drivers from both Dell and AMD, and I get the same result.The Graphics Processor Seting box is greyed out in Preferences, and it says it detected an error in my display driver. Everything was fine with the same graphics card under Windows 7.
Â
I suspect that when Windows 8 was installed it installed a generic AMD driver, and even though I have updated it from Dell and AMD several times, something is not quite right because I can't find the AMD Catalyst Control Center. So it might be a WIndows 8 & AMD issue, but I don't really know for sure.
Â
how to get the graphics driver working properly for CS6
autocad LT 2008 on windows 7 platform
after using this with only minor crashes for the last year I have now got problems with closing drawings which then locks autocad up and if someone else opens the file in the same program on windows xp then it crashes there program too while closing. I have tried redraw the drawing model file and produce a new drawing sheet exactly the same but it still crashes on saving of the file and have now noticed that any drawing i'm creating now does exactly the same. I have also completely reinstalled autocad LT 2008 to try to fix this problem but with no success. Has there been an update either with windows 7 or autocad that might have caused this problem and how to resolve this problem as I am now left with a computer thats useless to draw upon and rather not install an older version of windows just to resolve this problem after it running fine for over a year now.
The download trial verson of Photoshop CS3 does not run on Windows Server 2003. Is there a plugin solution?
View 1 Replies View RelatedI'm looking to purchase either Photoshop CS3 or the Creative Suite CS3, but the only operating system I have available is an in-house development server running Windows Server 2003.
I used to run Photoshop 5.5 on Windows Server 2003 without an issue, I wanted to make sure version CS3 will also run on this OS. I know the system requirements say otherwise, but as I said I had it installed on a server OS before with out any issues.
*all* of my cs4 master suite works great - no issues on any app - except the 64bit version of photoshop... it wont launch at all - and yes i have the 11.0.1 update (adobe updater says everything is current and file properties verify new version on both 32 and 64bit exes) running as administrator doesnt help either. also problem occurs when win7 boots in safe mode. i'm running build 7100 of win7 64bit and have 6gig ram on an i7 system with a gtx 285 so i'd love to utilize the benefits of 64bit.... when i attempt to launch the 64bit exe i get an alert dialog error saying "The application was unable to start correctly (0xc000007b). Click OK to close the application."Â and that's it. never makes it to the splash screen or begins loading any dll, it's immediate error.... and like i said, 32bit version works fine from doing cursory google searches and whatnot, i am led to believe it may be a memory addressing issue which i've been unable to investigate or that perhaps my .net framework was out of date? but i checked the framework issue and win7 includes the newest version...
View 16 Replies View Relatedinstalling Photoshop 7.0 on Windows 7 64bit with success?
View 9 Replies View RelatedI just purchased a new PC (with budget limitations) with the following configuration:
Â
8 GB RAM DDR3 (1600 Mhz)
1 HD 1TB 7200 RPM (WD)
i5 processor 3.00Ghz
GPU MSI 630GT 1GB DDR3
Â
After reading a lot of material on the web, about using a few physical hard drives for using Photoshop CS5 (I am working on lrage files, 300-800MB), I am wondering if my current conifguration with only 1 HD (1TB) is "strong" enough for my needs ?
How many partitions and size should I prepare when setting my PC ?
If I was able to squeeze another 100$ what should I get ? Another HD for Photoshop scratch disk ? or maybe an SSD ?
When I open the HDR toning filter the top of the HDR controls window is always hidden under the top edge of the screen. I can't reposition the window. This is in CS5 64bit. When I make the same actions in CS5 32bit and in CS6, the whole of the HDR filter window is visible in the normal way.
Â
How can I get to see the whole HDR controls window again in CS5 64bit?
Creative Cloud downloaded and installed PS CC on my win 64 bit system, but it installed the 32 bit version. Is it possible to install the 64bit version instead? If yes, how does one do it?
View 1 Replies View RelatedI have the Adobe Creative Suite 3 and I use Photoshop to create comics and complete drawings. Lately, I have been having a serious trouble with brush lag. The more I draw and color, the farther behind the brush gets from the curser. It doesn't matter what input device I use (Intuos 3 pen or USB mouse), I still have the same issue. I don't really know how to fix it. I know it is not my computer's performance; I have Windows 64 bit, a Sandy Bridge i7, 16 gigs of ram, and a Radeon HD6850.
Â
I've tried:Restarting my computer before opening Photoshop - Didn't workChecking for Adobe updates - Didn't workUpdating my graphics drivers - Didn't workÂ