Photoshop :: CS6 Does Not Detect Display Adapter After Upgrading To Windows 8

Feb 24, 2013

I just upgraded my 3 year old Dell XPS 16 which came with a AMD (ATI) Radeon HD 5730 (1GB) graphics card to Windows 8 (along with a new SSD hard drive), and reinstalled CS6, and now I get messages that the program is no longer detecting my dedicated graphics card. I updated the drivers from both Dell and AMD, and I get the same result.The Graphics Processor Seting box is greyed out in Preferences, and it says it detected an error in my display driver. Everything was fine with the same graphics card under Windows 7.
 
I suspect that when Windows 8 was installed it installed a generic AMD driver, and even though I have updated it from Dell and AMD several times, something is not quite right because I can't find the AMD Catalyst Control Center. So it might be a WIndows 8 & AMD issue, but I don't really know for sure.
 
how to get the graphics driver working properly for CS6

View 9 Replies


ADVERTISEMENT

Photoshop :: Unable To Display Photo In CS6 After Upgrading Windows From 7 To 8

Dec 25, 2012

After Upgrading from windows 7 to windows 8 photos are not displayed in Photoshop CS6. When I open a photo in the bridge, it is displayed properly in Camera Raw and can be developed there.

After opening the photo in Photoshop 6 then, everything looks good, but the photo is not visible. I can save it and even export it (to jpeg for example), but it is not visible.

View 2 Replies View Related

Photoshop :: Upgrading Windows

May 7, 2009

I was planning on trying out the windows 7 RC on my laptop but had a quick question before i did. My laptops currently configured in such a way that i can install 7 as an "upgrade" rather then a complete new install, keeping my programs and files intact. However, I remember in the past from when I first installed vista, if i tried to launch photoshop from a different partition(eg, photoshop is installed on the XP partition but i'm using vista), it would fail with an error saying something to the effect that licensing had stopped working. Will this happen if i "upgrade", or should I just install 7 on a different partition to be safe?

View 1 Replies View Related

Photoshop :: Upgrading CS6.0 And LR4.4 From Vista To Windows 7?

Nov 18, 2013

I use a couple of systems for CS and LR only.  They are running Windows Vista (Home Edition).  I wanted to sign up for creative cloud, but the service tells me that Windows 7 (or 8) is supported, not Vista.  If I upgrade my PC to Windows 7, will the current versions of CS6 and LR 4.4 still work?  Or, do I have to buy a new version.

View 1 Replies View Related

Photoshop :: Plugins After Upgrading To Windows 8

Oct 31, 2012

I made the upgrade to Windows 8 and now several PS plugins causes Photoshop CS6 to "Stop Working And need to close". I have uninstalled and reinstalled plugins and still the same problem. As this happens with different plugins from different vendors I am led to believe this is not a 3rd party problem, but rather a problem with PS in win8. Happens with plugins from Niksoft and RedGiant. Needless to say I have all the latest software and updates - legally purchased.

View 8 Replies View Related

Photoshop :: After Upgrading To Version 14.1 CC Shows Several CMD Windows During Load

Sep 10, 2013

after upgrading to version 14.1 CC, Photoshop shows several CMD windows during load. It stops on the third one, showing this:
 
Finally, a pop-up error windows says clc.exe stopped working (you can see that on the photo).  I'm running on Windows 7, 64 bit.
 
The crash message reports this:
 
Firma con problemas:
  Nombre del evento de problema:          APPCRASH
  Nombre de la aplicación:          clc.exe
  Versión de la aplicación:          0.0.0.0
  Marca de tiempo de la aplicación:          4c5cc9f6
  Nombre del módulo con errores:          clc.exe
  Versión del módulo con errores:          0.0.0.0
  Marca de tiempo del módulo con errores:          4c5cc9f6
  Código de excepción:          c0000005
  Desplazamiento de excepción:          000000000000a620
  Versión del sistema operativo:          6.1.7601.2.1.0.768.3
  Id. de configuración regional:          2058
  Información adicional 1:          e945
  Información adicional 2:          e9453ece61423ab98d0ee5bd40bdd8d2
  Información adicional 3:          be9a
  Información adicional 4:          be9a4f994c98c3a8aa1b5294bf419e15
 
Everything worked just fine before the update. Problems started right after upgrading.

View 1 Replies View Related

Lightroom :: Windows 8 - Canon 5D Mark II - Trying To Tether But Will Not Detect The Camera?

Dec 4, 2012

Trying to get my Canon 5D Mark II to tether. It is on the "good" list.  But all I can get is "Camera Not Detected".  Computer sees it ok.  But LR seems to be oblivious.

View 1 Replies View Related

Lightroom :: Installer Fails To Detect 64bit Windows 2008 Server

Dec 23, 2008

Moving to a Windows 2008 Server x64 desktop and notice that when Lightroom is installed it's the 32bit version. On Vista x64 the installer automatically installs Lightroom 64bit. Is there a way to manually select the 64 bit version for install ?

View 6 Replies View Related

Photoshop :: CC On High DPI Display On Windows 8.1?

Nov 2, 2013

I'm using a new Lenovo Yoga 2. The native resolution is 3200x1800. Most Windows applications use scaling to enlarge the menus and other aspects of their user interface. However, Photoshop CC is basically unusable at this resolution because it does not honor the scaling. I have to drop the resolution down to 1600x900 before launching Photoshop CC.

View 24 Replies View Related

Photoshop :: Display Driver Bug In Windows 7 X64

Jun 20, 2012

This only happens when PS CS6 (x64) is opened (fresh). If I create a blank doc, I get a top left "blank" rectangle. If I start up CS6 and select a file to open, I get the same blank square. After this, if I open or create a new doc, the files look fine.  If I zoom into the blank space, it will eventually draw in properly. This is on any file I open. The files are intact.This is on Win 7 x64, Updated CS6 x64.

View 4 Replies View Related

VideoStudio :: Recognizing Easy Cap Adapter

Jul 5, 2011

My installation does not recognize the EasyCap adapter (nothing shows on "Select Device" menu). I have re-installed and downloaded 64 bit drivers from the net with no effect. Running Vista Home Premium 64 bit, SP2.

View 1 Replies View Related

Photoshop :: CS6 X64 / Windows 8 64-bit And Error In Display Driver

Jan 27, 2013

So I have 64-bit Windows 8, 64-bit Photoshop CS6 and an ATI Radeon HD 4770 GPU. When I go to the settings in PS, it tells me that there is a problem with my display driver so I cannot use GPU graphics processing. I would really like these features to be available to me, especially since my GPU meets the recommendations by Adobe. I installed the latest driver from AMD.

View 5 Replies View Related

Photoshop :: Windows Drops Off Display Screen

Jan 20, 2013

The bottom of the window goes off screen so i cannot resize it by clicking and dragging the lower right corner.  Also in Navigator I can see that I should be seeing more image as indicated by the red outline. I have tried resetting Essentials, tried opening Photoshop while pressing Option / Alt shift, and nothing seems to work. 

View 2 Replies View Related

AutoCAD Inventor :: Applying Torque To Adapter

Feb 21, 2012

I am trying to apply a torque to an adapter to replicate it being driven.  I have constrained it and when I add the welds and simulate, it freezes at the 'computing mesh' stage.

View 6 Replies View Related

Photoshop :: CS6 Work Windows Too Tall For Monitor Display

Oct 28, 2013

On a MacBook Pro 15-inch retina display running OS 10.8.3, in Photoshop CS6: after launching PS, the work window is too tall for the monitor display. The bottom is cut off: there are no bottom scroll bars or nor any of the page info, I can't grab the resizing corner to change window dimensions. Also, I can't change from Standard Screen Mode: neither the left tool bar nor the F key has any effect. I've quit and restarted both the PS app and entire computer but problem persists.

View 2 Replies View Related

AutoCad :: Drawing To Draw Some Manifold Adapter Plates In Millimeters

Nov 5, 2012

I've been using cad for a while but only for simple layout drawing for parts I need made.

Autocad 2010 I want to set up a drawing to draw some manifold adapter plates in millimeters. I can set it up for inches but I'm having a problem setting up for mm. I start a new drawing and select the template initial setup-manufacturing-metric.dwt In drawing unitDecimal and precision is set at 0.000 Units is set to "millimeters"

I draw a circle to test it. I draw a circle of 5 radius. Should be a circle 10mm in dia, correct? But it is huge, my guess is that it's 10 inches. I'm basing the size on what is printed out when I set my print to no scaling, 1:1, plot window. The same as I have for all the drawings I do in inches.

Second question.

How can I get circle centers to show on prints without actually drawing them or putting in dimensions?

View 5 Replies View Related

AutoCAD Inventor :: Use IMates Names To Place Hydraulic Adapter Into Assembly

Jan 10, 2012

I am trying to use iMates names to place a hydraulic adapter into an assembly. The adapter has two male ends - one end with an insert iMate matching a cylinder iMate and one end with an insert iMate matching the hose fitting. When placing the adapter, the iMate names are ignored and it is mated backwards using inferred iMates.

Also, I get an error because it wants to mate new instances of the part to the unconsumed iMate of the part that was just placed (which I guess would place parts into infinity). I have changed around the iMate names and matching names every way I can think of, but the names still are ignored, and it uses other deferred iMates.

View 5 Replies View Related

Lightroom :: How To Get Windows 8 To Display Thumbnails In Explorer

Oct 9, 2013

Just changed from Windows XP to Win 8. In XP I could see picture thumbnails in Explorer where as in Win 8 I can only see the Application Icon.

PS: in XP I was using Photoshop CS3 Now I'm using Lightroom 5.2

View 2 Replies View Related

Revit :: Display Type Mark In Windows Tag For Skylight

Dec 22, 2011

The type mark for a skylight is showing up a s '?' in a custom windows tag. 

View 2 Replies View Related

AutoCAD Inventor :: How To Display IProperties In Windows Explorer

Apr 26, 2012

Any way to display the inventor iproperties in windows explorer or in the inventor open dialogue box? This would be useful for us in a lot of situations. If there isn't an inventor trick, maybe a windows trick?

View 9 Replies View Related

Edge Animate CC :: Animation Doesn't Display In Windows OS

Dec 5, 2013

Have a fairly simple banner ad created in Mac OS. Previews fine locally. Previews fine in Safari on Mac as standalone file and dropped in to iframe on Wordpress page (just like a Nivo slider on same page. Also previews in Safari using IE user agent string. When viewed in any browser on Windows OS, no animation display; either as standalone or loaded into iframe. Possibly something simple: a CSS visbility? URL....

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: How To Get Windows 7 64bit To Display Thumbnails

Jun 18, 2013

I've been trying to get W7-64 to display X5 thumbnails. I've been trying for months. My efforts have brought me to:

Have you tried this?
Have you tried that?
Have you tried Mystic Thumbs?
It's Microsoft's fault

The best I can do is a kluge I don't want to live with. I've been a Corel user for 20 years. Much as I am attached to the program, this makes it virtually unusable. I work with a ton of files. I need to be able to see what they are before opening them.

I'm disappointed to see this problem has been going on for a number of years. It gives me the feeling the good people who built Corel are all gone now, and pride in the product went with them.

I'd love to learn the real honest-to-goodness Corel fix is jist around the corner, but I can't even find an official Corel position on this issue.  Is there one? other than

The problem does not exist
The problem is the user's fault
The problem is Microsoft's fault

View 14 Replies View Related

AutoCAD Architecture :: Doors / Windows And Openings Fail To Display In 3d Model?

Mar 6, 2012

Okay so to start with I have a building with 2 staircores. Everything is drawn in 3d and I have drawn the 2 staircores as elements and subsequently Xrefed these elements into the relevant constructs and subsequently a 3D model view.

When I view the elements as a live drawing (ie. when I open the individual elements) the drawing views okay in plan and in 3D wireframe, hidden mode etc... no problem so far!

When the drawing is Xrefed into a construct and subsequently a 3D model all of the windows and doors disappear... but in 3d only - ie. viewed in plan mode they are fine. I have checked the display configurations in the constructs and views and they are all set to display these objects in the medium detail and high detail for the model and plan modes.

In 3d wireframe mode the windows and doors can be seen within the wall but the opening which they should create is non-existent!This occurs in teh construct and view drawings.

Here's the catch.... I have a 'West Staircore' and and 'East Staircore'. Both are drawn as individual elements. The West staircore is giving trouble, but the East is perfect. They were both set up using the same DWT file which means that the default display configuration settings should be identical.This is backed up by the fact that they view correctly in the live element drawings.

When they are both Xrefed into the same construct, one is fine and the other will not display in the 3D model!

View 3 Replies View Related

AutoCAD Inventor :: Display Default Windows Explorer Folder Tree In Open Dialog Box

Jan 12, 2012

Is it possible to display the default windows explorer folder tree in the open dialog box instead of the current "Libraries" folder?

View 1 Replies View Related

Photoshop :: Cannot Detect Scanner

Aug 15, 2012

I have just installed my Photoshop_CS6 but could not detect my sscanner, Why?

View 5 Replies View Related

Photoshop :: Detect Video Card In 32 And 64 Bit?

Jun 28, 2013

How can I get both the 32 and 64 bit versions of CS6 to detect my graphic processor (AMD Radeon HD7700) for GPU usage in Win 7 ? Cuiurently, it is only seen in 64 bit.

View 19 Replies View Related

Photoshop :: Software To Detect Image

Oct 7, 2012

yesterday i was watching the news , and they talk about images photoshopped and they named a software able to detect if an image is photoshopped..i don't remember exactly the name of the software but is something like full match (i'm almost sure about match"

View 16 Replies View Related

Photoshop :: CS3 Does Not Detect Tablet Sensitivity.

Apr 9, 2008

I recently switched from CS1 to CS3 and I haven't been able to get CS3 to detect the sensitivity of my tablet, although it worked fine with CS1.

View 1 Replies View Related

Photoshop :: CC - Plugins Being Able To Detect Internet Connection

Aug 14, 2013

I am using Photoshop CC with Windows 7 64-bit and all plugins have issues detecting my internet connection. When trying to use them, an error message pops up saying "No internet connection detected." I am connected to the internet, am able to connect to Adobe servers, and am not using a firewall or connecting through a proxy server.  I have checked my plugin settings in preferences to make sure plugins are allowed to use connections, and have tried editing the registry values in Windows to make sure that all Adobe products automatically connect to the internet, but still have had no luck.  Plugins I am trying to use are Kuler and Subtle Patterns (a third party plugin).

View 1 Replies View Related

Photoshop :: CC Unable To Detect Nvidia Card

Sep 12, 2013

I have a Sony vaio notebook with an intern Intel hd graphics 4000 and an additional geforce gt 640m LE graphic card with 2 GB. PS CC can't detect my nvidia card. In PS at the settings -> performance menu there is no nvida card to select, I just can select the intern graphic card at the moment if it's activated.
 
nvidia driver are up2date. Also have this settings done, but has no effect:

View 1 Replies View Related

Photoshop :: CC Not Detect NVidia GeForce GTX 680 After Driver Upgrade

Sep 23, 2013

i just upgraded the driver for my nVidia GeForce 680 graphics card from the nVidia website. the specifications are shown below.  Photoshop CC now says that it can't detect my graphics card.

nVidia verstion 327.23 WHQL
release date: Sept 9, 2013
operating system: windows 8 64-bit
 
will adobe have to issue an update to photoshop CC to fix the problem?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved