AutoCAD Inventor :: Unknown Error With A Surface Split
Oct 26, 2012
Attached is a surface model with parameters which drives an assembly I have. I was testing it by changing dimensions to see where failures in the main assembly occured. It worked for a few changes so I saved it and checked it into vault.
The Split using the 70 Deg Plane (you will find them in the browser, Split 5 and Split 7) is where the problem occurs. When I increase the outside diameter (i made it 147 in.), Spits 5 and 7 get moved up to the top half.
The same surface (named OUTER HOUSING SIDE) and its mirror are split on the XZ plane prior to the splits in question (5 and 7).
View 5 Replies
ADVERTISEMENT
Jun 26, 2012
I want to apply a pressure load on portion of a surface in my INVENTOR solid model. My problem is that i cannot split the surface in inventor easily. I did it my creating a separate surface with an offset that i reduced to almost zero.
View 4 Replies
View Related
Aug 4, 2012
I use INV 2013. MOVE THE END OF THE PART DOWN TO SEE WHATS HAPPENING. (MOVED TO REDUCE THE FILE SIZE). I am trying to split the solid using the surface as shown.
But, I am unable to do so. Also, I need to create a new surface with 0.50mm offset to create female form die.How to do it.
View 3 Replies
View Related
Jul 14, 2009
In five years using Inventor I've never seen this- I can't get it the parts list or BOM to register the quantities. Each box comes up with "Unknown Error" and it will not allow manual override to update those quantities.
View 8 Replies
View Related
Dec 16, 2013
I am attempting to split a face so I have a good area to apply a load in simulation and 3/4 of the areas split just fine but I CANNOT get the 4th area to split! This is all just projected geometry but left and right are symmetrical so I can't figure out why the L side works but not the R side.
View 2 Replies
View Related
Jun 16, 2012
When creating surface profile Is civil 3D use interpolation to get elevation of unknown (points which not having elevation data) points?
Or just join elevations which have elevation data(input data)?
AutoCAD Civil 3D 2012 SP 2
View 2 Replies
View Related
Sep 28, 2011
I receive this error (sometimes) on shutting down AutoCAd Architecture but what it may represent.
View 5 Replies
View Related
May 3, 2012
I get this common exception while debugging right after I close AutoCAD. I have not even run any commands that belong to my project, just open AutoCAD and Close AutoCAD.
--------------------------- Exception in c:program filesautodeskapplicationpluginssbd.bundlecontentsaalsbinacadaliasapp.arx ARX Command --------------------------- Unhandled Exception 1 (Access Violation Reading 0x89a63aa8) at address 775E32D0h --------------------------- OK ---------------------------
--------------------------- Exception in c:program filesautodeskapplicationpluginssbd.bundlecontentsaalsbinacadaliasapp.arx ARX Command --------------------------- Unhandled Exception 80000003 (80000003h) at address 776540BFh --------------------------- OK ---------------------------
Call Stack:
[In a sleep, wait, or join] > mscorlib.dll!System.Threading.WaitHandle.WaitAny(System.Threading.WaitHandle[] waitHandles, int millisecondsTimeout, bool exitContext) + 0xb6 bytes System.dll!System.Net.TimerThread.ThreadProc() + 0x2d6 bytes mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state, bool ignoreSyncCtx) + 0xdc bytes mscorlib.dll!System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, object state) + 0x3b bytes mscorlib.dll!System.Threading.ThreadHelper.ThreadStart() + 0x4d bytes [Native to Managed Transition]
View 3 Replies
View Related
Aug 2, 2012
Trying to patch and then sculpt an area on a pipe so that it blends together better, however it keeps coming up with an error. The strange thing is, it shows up in the preview after selecting all the edges but then does not calculate correctly.
Basically trying to fill the 2 small areas between the visible workplanes. Also, I couldn't get the project cut edges in the 2 sketches to only project the curves I needed, so all the cylinder edges are projected.
IV2012
Windows XP SP3 32-bit
Intel Core 2 Duo 6400 @ 2.13 GHz
Nvidia Quadro FX 3450/4000 SDI 256MB Vram
2 GB Ram
160GB HDD
View 1 Replies
View Related
Jun 6, 2013
I do a lot of visualization work I need a corridor top surface split by material FAST. before I used Corridor Solids but I don't have the extension in 2013. So I export to CivilView, so far so good, then attempt to roundtrip the mesh back in Civil3D and that is where things fall apart.
Export to DWG is not split by material
Export to 3DS results in a blank screen
Export to FBX comes in missing large chunks of mesh out of scale and in the wrong location
View 6 Replies
View Related
Sep 2, 2011
My company upgraded our AutoCAD from 2007 to 2009 this past Monday. I'm getting an error message when trying to change the order of objects in model space.
Command: Unknown command "AI_DRAWORDER". Press F1 for help.
Command: Unknown command "FRONT". Press F1 for help.
View 5 Replies
View Related
Feb 16, 2012
When importing objects into Inventor, all surface objects are being joined together into 1 composite surface. What I need is multiple surfaces, or seperate surface/composite objects.
Capture 1
Shows 3 solids imported from Rhino
Each solid is a sepreate solid
Capture 2
Shows 2 solids and 1 surface composite imported from Rhino
Capture 3
Shows 1 solid and 1 surface composite imported from Rhino
1. Why is Inventor creating 1 composite from multiple non intersecting surfaces?
2. How can I avoid this from happening?
View 4 Replies
View Related
Oct 6, 2012
I get an unknown graphics processor error when I try to use Oil Paint filter. I have been able to use this feature before and all my devices are up to date.
View 6 Replies
View Related
Apr 13, 2012
Recently I found that I couldn't import a .bip file onto my CAT rig. Here's the error message:
Unknown system exception
and highlights the following line of code:
local liindex = FindCATNode catNode;
I've tried several things and copy/pasting the error to google only gives a single page of results, with very few possible solutions. There was one saying I should replace the highlighted code with a different piece of code and restart max. this just changes the error message.
Another solution was to get max 2011 32 bit, save it there and open it up in 2012, however other posts had the exact same problem with importing 2011 files into 2012. so that also doesn't seem like a working solution.
That's about when I reached the end of the page... Could it be that importing the original BVH onto a biped and exporting the animation to .bip caused the .bip file to get corrupt or something? I've tried loading the BVH file onto my CAT rig directly, but this just crashed max.
View 2 Replies
View Related
Feb 21, 2014
Illustrator won't let me save! It says "Unknown error has occured." I only have line work and text I placed from AutoCAD as a DWG file on the artboard and I was going to color the rooms in Illustrator.
View 1 Replies
View Related
Mar 12, 2013
We work on PC's with CS5 installed on approximately 7 seats. One artist posted this error message asking what do you do when you see this? Well now I'm seeing this message. Not funny. The problem started when I attempted to paste an template into a blank document. There was a conflict between swatches. I'm not sure how many there were, around 200 or so. Each one requireing me to click OK.
View 9 Replies
View Related
Sep 20, 2011
Starting yesterday I now get the above error message when clicking anything on any open Illustrator file (CS5 - Mac). Wondering if it's something I did or a corrupt pref file or what? How should I resolve this or what can I check?
View 8 Replies
View Related
Feb 5, 2014
I get an error "The operation cannot complete due to an unknown error" when I copy paste ax XL graph from MS excel to Illustrator CS6. This happens only when I paste the graph created in Win7 but when I paste the graph created in XP, it doesn't throw any error and works fine. why get this error only with the graph sheets created in Win7
View 3 Replies
View Related
May 23, 2013
We've been experiencing an issue with saving illustrator files (as .ai). The error message is "unknown error occurred" when attempting to save. Things tried already:
delete preferences file
uninstall/re-install CS6
standardize all fonts to arial
save in another location (desktop, network)
save as .eps
But still same.
This happens when copying components of one ai file to another and trying to save it. Found that removing one tiny piece from a drawing allows the save.There is no text in that piece, just lines and shading.
View 2 Replies
View Related
Sep 13, 2011
Sometimes I get a MAXScipt Callback script error – Unknown property Modifier. Everything seems to work fine with this message popping up but it’s just annoying.
3ds Max 2013/2014
Autodesk Inventor & AutoCAD
HP xw8600 Workstation
Windows 7 64Bit
Dual Intel Xeon 2.83 E5440 GHz
8.00 GB of Ram
View 4 Replies
View Related
Aug 1, 2011
I am working on a scene in Maya 2011 as a Maya binary and can open the scene up in Maya 2012 as a binary without any problems. But, when I save the file in Maya 2012, I can no longer open it in Maya 2011.
I've read in the forums that I can save it as a Maya ASCII file and have better luck transferring between Maya versions but I cannot get Maya 2011 or 2012 to save the scene as a Maya ASCII file.
I get the following error: // Error: File contains unknown nodes or data. To preserve this information, the current file type cannot be changed.
I've tried "Ignore Version" on when opening and have deleted all all by type/non-deformer history but no luck.
View 1 Replies
View Related
May 19, 2011
I'm attempting to export out an animation clip and got the above error. A similar post years back and said it was a plugin issue. But nor sure which plugin I might have turned off.
By the way, Steps performed prior to"
Selected mesh and rig (contains IKFK nodes)> Generated character set "walk", ect Then while still selected, Edit>Keys> Baked Simulation Then from the graph editor and the character selected, File> Export Animation Clip....that's when I get the error.
I think I covered the steps correctly. Maybe I'm missing something?
You more experiance animators/riggers might be able to shed some light on this modeler.
View 2 Replies
View Related
Dec 12, 2013
I recently upgraded to CS6 and cannot open any past files in CS6 from CS5. Everytime I try I Get "Unknown Error has Occurred"
View 2 Replies
View Related
Nov 8, 2013
I have both 32- and 64-bit versions of Adobe Illustrator CS6 The error occurs only with the 64-bit version,The error occurs only when saving files containing text objects.Unchecking "Create PDF Compatible File" doesn't solve the problem. Resetting Illustrator's settings also doesn't work.
It's pretty much time taking switching between the two versions and I also have files pretty big enough that require opening in the 64 bit version.
View 2 Replies
View Related
Apr 1, 2013
I'm using a macBook pro with retina display runing Mac OS X 10.8.3. When I try to use Brush libraries I get "an unknown error has occured".
View 2 Replies
View Related
Apr 16, 2013
I am not able to save my files and illustrator gives the message 'An Unknown Error has occured'. In a previous discussion transparency is called out as the culprit however I am not using transparency in my document and have checked all the items. I have also tried copying the work into a new ai file however this also will not save. This is has happened to me about 5 times since I updated to CS6.
Update - I just closed Illustrator and lost all my work and then an Adobe update window showed up asking me to update Adobe Air. I recall an Adobe Update window appearing once before when I had problems solving. Could the Adobe update window interfere or prevent me from saving my documents?
View 14 Replies
View Related
Apr 5, 2014
Trying to troubleshoot a weird issue w/ Lightroom 5.3 on a PC. Updated my current catalog and wanted to import a couple of old catalogs to consolidate images. The first two of the old catalogs updated and imported just fine, previews were merged, data seamlessly integrated -- all good. But the third catalog is giving me no end of grief. It goes through the update process to be LR5 compatible, but when I say "import everything" on the list of found images/folders, it tries for a bit, then fails out with "unknown error". This happens regardless of what I pick from that catalog -- even a single folder. It also happens if I export a sub-catalog from the old catalog and try to import that. But the updated catalog runs just fine on its own.
I've tried optimizing the offending catalog and checked for any possible issues with folder names, missing images, incompatible formats etc. etc.
I'm reluctant to try the "reverse" operation and import my main catalog back into the old, "challenged" catalog for fear of future corruption.
View 2 Replies
View Related
Aug 17, 2013
I use lightroom to edit the timelapses I shoot and it works brilliantly with the sync setting. But my problem is I use presets that call for the slideshow to move at 24 fps, 26fps, 30fps etc. and some of these time lapses contain over 300 photos and whenever I try to export the timelapse as a video from the slideshow module about an 8th of the way into the progress bar it stops and a message comes up that says "unknown error occurred" So my question would be: Is there a maximum number of slides you can have in a slideshow and is that what's causing this to happen?
View 2 Replies
View Related
Jul 16, 2013
I have been having a problem with Photoshop crashing.It seems to be (may be) triggered by using the pattern "Pattern Overlay" option in the Layer Style dialog box. When I click on the pattern thumbnail to bring up the full range of loaded patterns.
Photoshop then seems to activate Photoshop Online Help, despite not being prompted to do so.I have two screen shots of the error messages which I am presented with. Unfortunately I seem to be unable to upload them to this message (I am using Chrome). This is another error to flag maybe?
One of the errors says, "Photoshop.exe - Application Error: The exception unknown software exception (0x40000015) occurred in the application at location 0x660561c9."The second error says, "Layer Style - Photoshop Online Help could not be displayed because you are not connected to the internet."
My system info is detailed below:
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2893 MHz
[code]....
View 10 Replies
View Related
Jan 26, 2013
Heres all my system info.
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
View 6 Replies
View Related
Mar 17, 2014
I receive that message when I try to open a new document. My others such as Photoshop and In Design are fine as far as I can tell. I'm using CS4 on Windows 7.
View 2 Replies
View Related
