I need to add a custom column to a parts list and have it display as the last column.
oPartsList.PartsListColumns.Add (kCustomProperty)
This code runs, but nothing happens...no error...no column..
When you open Inventor 9 drawing in the Inventor 11. It is possible to convert partslist by clicking right mousebutton above partslist and selecting "convert" from the popup menu .Is it possible to do this partslist convert in the VBA?Is this partslist convert supported in the IV 11 or IV 2008 API?
View 3 Replies View RelatedWe are working with IV2012 and for a customer we have to generate about 1400 drawings. All these drawings we have to export to (Autocad) DWG and PDF format with the drawing number, revision, sheet size and name in the filename processed. All the parts and assemblies only have the part number as filename and this corresponds to the drawing file (idw) name. We dont want to change these basic filenames so i made a rule to export a assembly drawing and the part list, if present.
So far so good, the only problem I encounter is that I can't get the revision number outoff the iproperties from the right drawing. Say that if the assembly drawing has revision A, all the exported drawings from the part list get that revision number, even if they don't have a revision filled in. At first I export the main drawing, then test for a part list, if present, I loop through all the drawings in the part list, open them and export them to DWG and PDF. And that's the point where it is going wrong with the right revision number. It seems that the only iproperties I can approach are those from the main drawing, the file from where the rule is fired.
Because the rule is pretty long I attached it.
I use Inventor 2010.
I would like to have a dynamic Partslist on my drawing. In the "comments" field in the partslist I specify the pipe with DN or ASME standard with size and Length. But the length is diffrent on every occation and therefor on every drawing. Can I display the parameter for the length variable in the comments-column instead of a fixed value?
Ex. Pipe length parameter: "PipeLength" (= 200)
I want to use a command, something like
DN32, L= <PipeLength> MM
Result displayed in the comments field:
DN32, L=200 MM
How do I get this result? Do I need iLogic installed for this?
In Bill of material i have custom PartQty column and is beside QTY column. I need all informations from QTY column to PartQty column to copy. Possible with iLogic? I'm selecting now manualy copy and paste but it would be nice to have automatic.
View 9 Replies View RelatedAs I know, the balloon in Inventor drawing (.idw) is always associated with partslist or BOMview, is it true? But the result is not always what I want. I have to override the partslist generated balloon manually many many occations.
Can I create an independent balloon where I can assign the number (or even alphabet text) directly. Is there any API to create such independent balloon which can attach to a drawing curve?
I am trying to publish to the CC a guide rail. The vendor of the rail gives me the option of entering the desired length of the rail. After that he gives me the option to choose between the length that I entered and a shorter and longer standard length witch can be delivered faster.
I want to do the same thing with my published part, but I cannot make a key parameter to change depending on the entered custom parameter. I want the user to make the next steps when inserting from the CC: 1- select the size of the rail; 2-select the type of the rail; 3- enter the desired length of the rail; 4- choose between the desired length and the 2 recommended lengths (I need these 3 lengths to be shown)
Is this possible?
my drawing file , have block name 'column' but i want to change name from column to new column.
View 2 Replies View RelatedIs there a way to add an iPart column to the iPartTableColumns collection? I'm using Inventor 2009.
View 5 Replies View RelatedIs it possible to have a column in the BOM but i do not want to show it on the drg.
like you can do it for rows for example...
Is there a way to customize the BOM columns so that Inventor remembers which columns I need? I know that I can add in the file name column etc. but I use the same columns over and over. I find myself in every assembly adding these columns in.
Autodesk Inventor Professional 2010
I have a problem inserting the slanted columns when I use the "Beam/Column joints" commando. When I insert the slanted column, the beams are divided.
It should look like picture 1, but it always ends up as image 2. How can I solve this?
When I try to calculate bending moment stress thru "Beam and column calcultor it shows an error that is Wk and Jk is missing. Ok that is fine. If we put values for both we will get the answer. Because I have come to know thru inv discussion that many material in the CC do not have these values.
Now my question is when we insert a part for example from content centre (CC) and do FEA analysis on this part. It shows some values like deflection, stress etc etc. How is that possible? one side it is not doing in the beam calculatio but other side in FEA it is doing that.
It means we are not going to rely upon these results in the FEA. It is the same CC, same inventor, how should be trust the result in FEA.
how can i access the value in this column using vba?
View 1 Replies View RelatedI have written code to allow me to pick the dimensions of a part and update the dimension parameter name from a list of choices presented in a form e.g. length, width, thickness, outer_diameter, wall etc.
The parameters are exported and I can get overall sizes in the BOM with relevant expressions in columns. So far so good.
What I would like to do is have a global SIZE column in the BOM which has expressions that vary based on another custom iproperty (PartType) which defines the part. So for example if the PartType was 'circular plate' the expression in that parts row of the SIZE column would be <outer_diameter>x<Thickness> while if the PartType was 'tube' the expression in the that parts row would be <Outer Diameter>x<Wall>x<Length> etc
If I could do this I would not need different columns to define the sizes of every different type of material we use and also limit the number of parameters the user needs to choose from when picking part dimensions.
However looking at the BOM API I do not see an obvious way to alter the expressions.
I have a BOM that shows up as in units for length items and unitless for qty items. When I change the UOM to use FT units the non-length units get inch ticks. The qty 1 which means I need one shows up as 1" where I do not require a 1 inch part but one each. How do I remove the inch ticks?
View 5 Replies View RelatedI'm detailing an iPart. Only two dimensions need to be included in the table. One is the driving dimension and the second is a function of the driving dimension. How do I get the column for the second dimension to display a value, rather than an equation?
Inventor Routed Systems 2010
Subscription Advantage Pack SP3
Vault Collaboration 2010
Windows 7 x64
Dell Precision M6400 Covet
I've seen things about getting the information from the parts in the BOM list, but not about seeing what is present in the structure itself
View 1 Replies View RelatedIn five years using Inventor I've never seen this- I can't get it the parts list or BOM to register the quantities. Each box comes up with "Unknown Error" and it will not allow manual override to update those quantities.
View 8 Replies View RelatedI have copied a standard "L" to my custom library. Now I would like to map the properties for the CC parts to be like my other parts that are not created in CC. One of the things I need is the "Title" and "Description" iproperty fields need to be the sectional size, i.e. L3x2x3/16, L4x4x3/8....etc.
To do this, I went into the editor and created a column. I mapped this column to Project.Description (see image)
why this does not work? When I create a new part and look at the BOM, I only see "Angled Steel" in the description iproperty field (see image below)
I did the same thing with the "Title" field and the "Project" field. Those work great.... just can't make teh Description field happen.
This is with Inventor 2011.
I have a program that create a bunch of new custom Iprop in each part of an assembly.
How can I show all those new properties when I open the BOM in the assembly file. Manually I can add a custom column but that is time consuming. Is there a way I can create a macro that will add those custom column in the BOM view?
I need to create a column in a partslist that reads IDENTIFYING NO. instead of the factory PART NUMBER title. When i create the new property in the column chooser dialog box how do i get inventor to pull the PART NUMBER from iprops over to the IDENTIFYING NO. column.
View 4 Replies View RelatedI have an assembly with a custom iproperty column that filled a need that has recently been removed. How do I delete the column from the BOM editor? I realize the iProp will still exist in the part files, I just want it gone from the BOM editor when I open it. I thought I could just delete it from the "Add Custom iProperty Columns" button but no dice.
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
I need to show column locations in a Plan (overhead) view. The columns are so small that they don't show up very well. Is there an "automagic" (I'd prefer not to have to manually place some kind of sketched symbol on each columns linework) way to do a PART REP (so-called) in a drawing?
I'm using 2012 Premium.
A quick way to add a single column to multiple items in the Content Center? The column would be the same across the board, and I really don't want to edit several hundred family tables one at a time if I don't have to.
View 2 Replies View RelatedIs there a command in Inventor to add values in a column in the Part list ( BOM) and to display a total value bottom like the Grand Total in Revit?
View 2 Replies View Relatedi want to export my part list with ilogic in a excel template but dont want all the part list column and dont erase the column i skip in excel?
View 3 Replies View RelatedaIs there a way to Format the Column Header to wrap text & rotate text if necessary? I would prefer if I could only Format the QTY Column Headers, but leave the others s is.
View 2 Replies View RelatedHow to add a volume column to ipart author table?
Evantually I need to display a table with part weights.
Inventor Professional 2013
Vault Collaboration 2013
it is possible to set the value of one or more "custom" column of an iPart row.
Per example woul this iLogic method work?
iPart.ChangeRow("iComponentName:1", "RowMemberName", customParam1, customParam2)
If so, could you demonstrate how to use it?
I copied an existing family into my new read library. I added some rows to be able to generate a few variations that were not contained in the original family. I just copied existing row up several times and edited the information in those rows to yield desired new variations. I made sure the file name column contained a unique file name for these new members. When I go to publish I get this error message:
Defined file name does not include all custom columns. An identical file name can be generated for different members. Make sure that the file name is unique for any combination of custom column values to avoid placement failure
Missing Custom Columns:
Length
(see also attached screen shot)
I have scoured the file name column and can find no repeated file names; I cannot understand the rest of the error message. It must have something to do with the "does not include all custom values" portion of the error message.
