AutoCAD Inventor :: Can Extrusion-1 Be Shelled Between 2 Work Planes
Apr 25, 2012Can extrusion-1 be shelled between the 2 work planes?
View 4 Replies
ADVERTISEMENT
AutoCAD Inventor :: Work Planes Angles
May 15, 2013In a part file is it possible to find the adaptive workplanes used to create extrusion1. And then find if the two workplanes are at an angle with respect to the origin planes.
Have been looking for a while but it seems hard to find information on workplanes
AutoCAD Inventor :: Cannot Project Any Work Planes
Sep 6, 2013Isn't this an important part of sketches? Why would I not be able to project a work plane.
Cannot project any w-planes whether default or created in inv2013.
AutoCAD Inventor :: Turning Off Thousands Of Work Planes?
Aug 21, 2007Ive started at a company where all of their parts and assemblies have all of the work planes, axis and points visible. Im getting bored of going view, object visibility, turn off all work features everytime i open a new model. Anything written that will turn off these features and only turn them back on when requested.
basically im looking for a shortcut, rather than opening every part and assembly and doing it manually.
AutoCAD Inventor :: Reappearing (Unwanted) Work Planes
Nov 20, 2012The problem I'm having, or what's annoying, is reappearing (visible) Work Planes. I have a number of parts in my assembly that I make invisible and visible on a regular basis and I find that when I make a part visible, the Work Planes of that part also become visible. It's very annoying and time consuming having to turn off the Work Planes when there's no need for them to be visible.
Is there a way to either make all Work Planes invisible or to permenantly make Work Planes invisible unless you specifically make them visible.
AutoCAD Inventor :: Work Planes Turn On In Sketches?
Aug 12, 2013Any time I create a new sketch in my assemblies, all of a sudden every existing work plane toggles from "invisible" to "visible".
In small assemblies, this is fine, but in 100+ part assemblies, it is a major headache. I don't want to turn off work planes every time I make a new sketch.
Is there any way to disable this "feature"?
AutoCad :: Removing Work Planes From Inventor Viewer?
Mar 28, 2013Is it possible to turn of created work planes within a 3d model when viewed through the Design Assistant 2013 inventor viewer.
View 0 Replies View RelatedAutoCAD Inventor :: Origin Work Planes Have Lost Their Names
Sep 26, 2011see attached image. The Origin Work Planes of my assembly, and some of the origin work planes in sub-assemblies have lost their names. No longer can I see XY Plane / XZ Plane / YZ Plane - all I see is a little red dot when I hover over where the name used to be. ??
View 2 Replies View RelatedAutoCAD Inventor :: Work Planes In Frame Generator Parts
May 27, 2012In previous versions, as clunky as it was, I used to put a work plane in the centre of a frame generator part using "G_L/2"
This does not seem to work anymore in 2013.
Inventor Professional 2014.
Windows 7 64 bit.
AutoCAD Inventor :: Turn Off Work Planes Sketches - Macro / Batch Process
Aug 23, 2012Is there anyway to batch-process a load of parts and assemblies to turn off work planes, sketches etc in the master design view rep?
I'm aware of the Object Visibility feature but I want them turned off in the model tree.
AutoCAD Inventor :: Unfold Or Create Flat Pattern Out Of Shelled Cylinder?
Nov 29, 2011How to unfold a or create a flat pattern out of a shelled cylinder with front faces on both ends?
View 9 Replies View RelatedAutoCAD Inventor :: Creating Parts With Work Planes Defined By Other Parts
May 2, 2013I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
Revit :: Why Basic Drafting Features Don't Seem To Work With Reference Planes
Sep 16, 2011I am learning to use Revit 2012 and having a hard time figuring out why basic drafting features don't seem to work with reference planes. Aligning more than a few of these one-at-a-time is time consuming - any way to extend multiple reference plane lines to a boundary line or object? I read your instructions for offsetting reference planes - when I select the reference planes button in the home tab, the options bar allows me to set an offset distance but I am at a loss as to how one goes about getting the line to offset - I keep getting the layout dimension when i try to click on the line!
View 9 Replies View RelatedMaya Modeling :: Creating Planes In TopView Doesn't Work Properly
Jul 31, 2012I don't know what went wrong with that View. I can create polygon planes properly in all views but top view.What can I do to make it function again when I set up the Project.this problem occurs everytime when I set up Image Planes for the top, side and front view. URL...
View 2 Replies View RelatedAutoCAD Inventor :: Planes Visibility
Oct 15, 2013I have 2 problems:
1. created a turbine whose blades are made from some planes that I applied thicken offset command. I applied circular pattern to multiply the blade around center point but i get too many planes and i must to make invisible each one. How can i make invisible all planes in the same time.
2. After i make them invisibile i exit from that part but when i start that part again or when i place it in an assembly all planes are visible. What should i do to make them invisible for ever.
AutoCAD Inventor :: Origin Planes Are Oversized
Sep 27, 2012My model is up in the top right of the planes. I cannot figure out why my origin planes are oversized like this. I have went through the browser and checked all the parts to see if something is out there, nothing. I have set auto-resize on origin planes and yet these are large.
Dell XPS 8300
Intel(R) Core(TM) i7-2600 CPU@3.40GHz
16GB RAM
Win 8.1 Pro
Autodesk Product Design Suite 2014
AutoCAD Inventor :: No Planes Or Lines Display
Dec 17, 2013I just installed inventor. When I begin a part there is no display of the planes, only the corner indicators show up when I hover over a plane. Also, when a part is created, only the edges show up when I hover over them.
View 4 Replies View RelatedAutoCAD Inventor :: Not Bringing Up 2D Sketch Planes?
Nov 13, 2013recently installed inventor pro 2014 on a school computer for a project we are doing, one problem. when i click 2D sketch nothing happens, so i have no wau to make a sketch.
View 2 Replies View RelatedAutoCAD Inventor :: Part Measure Gets Planes
Apr 10, 2013I've created Custom properties, parameters, to get the outside measure of the parts and it works fine until we create and leave activated a work plane outside the part so it measures not until the end of the part but until the plane.
View 9 Replies View RelatedAutoCAD Inventor :: Drawing - View Between Two Planes?
Sep 11, 2013i have assembly and i want make drawing of part of it. Part of assembly i want to show/draw is between two parallel planes. How can i do this?
I'm using inventor 2010.
AutoCAD Inventor :: Auto Project Datum Planes
Jul 13, 2012is there a way to auto project datum planes that are square to the sketch?
View 4 Replies View RelatedAutoCAD Inventor :: Insert Part In Assembly On 1 / 2 Planes
Jan 2, 2014Is there a way to insert a part that would be grounded or flush constrained on one or two planes only (automatically) and not all three? For example; you'd insert the part and you'd pick the two planes that you want to be flush constrained but the 3rd plane you'd constrain yourself.
View 2 Replies View RelatedAutoCAD Inventor :: Create A Loft With Intersecting Planes (vb)?
Apr 27, 2012I want to create a solid using VB and loft definition.
I creat each time different planes that have a constant distance in x dimension and a steady rotation each time φ (deg).
On each each plane i sketch the same profile and that is happened for 360 deg.
The problem is that Loft is not made because a line of the profile must follow a line tragectory and all other points must follow a circular tragectory. Also, there is a problem from 180 deg to 360 because there is intersection of profiles.
The result must be a solid similar to snail shell but all the same solid, as a cylindar whith a half sphere in the bottom.
AutoCAD Inventor :: Angle Constraint Between 2 Planes Of Parts
Nov 29, 2012In my assembly I've set up angle constraints between 2 Plane's of 2 parts (min: 40 deg max: 160 deg). If I move the parts slowly the angle constraints holds but if I swing it hard sometimes it flips and gets out of the angle constraint.
View 2 Replies View RelatedAutoCAD Inventor :: Super Long Datum Planes
Nov 19, 2012I have found after my last save, the Datum Planes of the assembly have just lengthened in two directions monstrously for no reason. I checked to see if it was an unassebled straggler but cant find anything. Is there a way of knowing why it does this.
Check attached image, the dot is a machine 20 metres high and the datum plane seems to reach the nearest neighbourhood for some reason.
AutoCAD Inventor :: Assign XYZ Planes After Drawing Is Complete?
Feb 15, 2013I'm trying to re assign XYZ planes after the drawing is complete. I understand changing the view cube etc, but I need to change the sketch itself to match the view cube to set up machining on our CNC and minimize material waste.
View 3 Replies View RelatedAutoCAD Inventor :: Split 3DLine With Planes (3D Sketch)?
Sep 5, 2012Is it possible to split a 3d line with planes.
I am not able to find a Split method on Sketchline3d.
{Code}
Sub Split_Lines()
If ThisApplication.Documents.Count = 0 Then Exit Sub
If ThisApplication.ActiveDocument.DocumentType <> kPartDocumentObject Then Exit Sub
' Check to make sure a sketch is active.
If Not TypeOf ThisApplication.ActiveEditObject Is Sketch3D Then
MsgBox "A sketch must be active."
Exit Sub
End If
[code]...
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
AutoCAD Inventor :: Error In Extrusion
Oct 4, 2013What's wrong with extrusion 15?
I deleted many features since the file was large, and many features got warnings, but extrusion 15 was the only one with warning in the original file.
AutoCAD Inventor :: Add Extrusion On Assembly
Aug 16, 2012I wanted to add an extrusion to an asembly. I was able to highlight the required geometry and create the feature, but is not showing up. In the browser, there's a red "up arrow" beside it. Why is it not showing?
View 3 Replies View RelatedAutoCAD Inventor :: Extrusion Using ILogic
Aug 9, 2012I have closed profile "Sketch1" placed on one of the parts in Assembly.
Suggest iLogic code to create cut Extruson (Extents=All) based on the "Sketch1"
AutoCAD Inventor :: How To Get Extrusion To Update
Oct 27, 2012First off if I update a sketch block in a derived part, how do I get the sketch blocks to update? Do I have to delete derived item, and rederive it?
Also if I modify a sketch block that is used for a extrusion, how do I get the extrusion to update? Do I have to delete extrusion and rextrude?