AutoCAD Inventor :: Extra Lines Or (tails) On Everything?
Dec 16, 2011Had these lines show up in ACAD. I have to restart everything to get them to go away.
View 1 Replies
ADVERTISEMENT
AutoCAD Inventor :: Plots Extra Lines On Drawing?
Oct 16, 2012When plotting any IDW files to our full size plotter, I have ghost lines running through the drawing (lines that are not present in the drawing, on screen or preview) alomost like the plotter is printing extra extension lines on the drawings, overlaying 2 sheets on 1 drawings and even moving some text on the drawings. I have all the SP's and am lost. I can move to another computer and print drawings fine so its not a plotter issue.
View 2 Replies View RelatedAutoCAD Inventor :: Reproducible Error - Extra Lines In IDW
Sep 23, 2011I have a 4" pipe tee that was imported to IV from a neutral format ( I don't remember which one. ) In the end view, there are always extra lines showing extending from the branch of the tee.
I can hide the lines, but that then hides the edge lines of a plate welded to the tee branch. Files are attached
Files and more information is already posted on MCADForums:
[URL]........
AutoCad :: UCS Turns To Extra Lines And Even The Dimensions
Mar 3, 2013I have a problem in my ucs icon when i am drawing/rotating and dimensioning my drawing.. the ucs turns to have extra lines and even the dimensions has unnecessary lines. how am i suppose to fix this
View 2 Replies View RelatedAutoCAD 2013 :: View Base With Extra Lines
May 28, 2013I am using 2013 and have a few 3D objects in the modeling space that I am using view base to put different views of each into the paper space. When I do this and export to PDF, I get an extra green line from the paper space. I have deleted and replaced the view and have tried different views with varying sucess.
Some pieces simply need a different view, however I have one that will not go away. The different view does really solve the problem either because I need the view with the problem. I have attached a picture of the issue, but it is just a chunk to protect information that I cannot share. The gray in the drawing is the part, the green line should not be there. The green line only shows up on the PDF, not in modeling space or paper space.
AutoCAD 2013 :: Remove The Extra Sash Lines
Nov 11, 2013Is there a way to remove the extra sash lines which, in plan, are meant to represent the sash below the cut plane? I want to keep the sash "nub" at adjacent to the frame, but remove the lines which run parallel to the glass.
See attached pdf for detail of what I'm referring to.
AutoCad :: Printing DWG To PDF - Extra And / Or Missing Lines / Objects?
Dec 16, 2010When I use the built-in dwg to PDF for publishing multiable layout tabs I somtimes get extra and/or missing lines and objects on the PDF. When in model space no extra lines a present or missing. Everything is where it need to be. Same goes when a review the drawing in layout before I publish to PDF.
When I publish to paper its fine, no problems.
AutoCAD Architecture :: Add Rafter Tails To Roof Slab
May 9, 2011ACA 2011...what the best way was to add rafter tails to a roof slab. Someone responded (and even attached a dwg) of a way to do it with a curtain wall. I'm not very well versed in curtain walls, though I get around okay with door & window assemblies, and they seem similar, I just don't really know what differentiates them within the program. That aside, any way to create exposed rafter tails more efficiently than arraying mass elements?
View 1 Replies View RelatedPhotoshop :: Turn Off The Extra Grid Lines
Jul 29, 2005i open a new picture i have to first ctr h to turn off the extra grid lines in order to view my pcitures , is there a way to turn off the extra grid lines permanently so i dont have to do it every time i open a new picture?
View 3 Replies View RelatedPaint.NET :: Clean Up Extra Sketch Lines?
Feb 12, 2011I often draw freehand onto a piece of paper and then scan the completed sketch, to change size and clean up sketch lines and then re print...I've recently tried pant.net and i was wondering if there is a tool that cleans up extra sketch lines? as most of my designs are basically tattoo designs, i need to make sure the lines and everything is perfect before taking them to a tattoo artist?
View 2 Replies View RelatedAutoCAD Inventor :: Extra Parts In BOM
Jan 15, 2013Open SKS.iam which is suppose to be empty, but for some reason asks for the 14020-111.iam file. Once it opens go to the BOM and you will see 24 of the same part in the BOM. If you derive the SKS.iam you will see those 24 parts listed and you will even see them. Yet when you go back to the base SKS.iam they are not visible in the browser or the windows graphic area. IV 2012 sp2
View 8 Replies View RelatedAutoCAD Inventor :: Extra Dimension Styles
Oct 12, 2011Inside of the Style& Standard Editor (Manage-> Style editor) we use ANSI and a Company standard created off of ANSI.
But when I choose the filter to ALL STYLES, I can see JIS, DIN, All other unwanted styles. How can I get rid of them?
Do you all have them too? How do you get rid of them if you dint use them?
C1
Inventor Professional 2013
Vault Collaboration 2013
AutoCAD Inventor :: Add Extra Section Onto The Top Of Volute Neck
Oct 21, 2011I want to add a extra section on to the top of the Volute neck so i can keep a perfect shaped circle for the flange i will place on top.How can i add the extra section that retains the perfect circle and also flat across the top for a flange i will place on top..Using Inventor 2012
View 3 Replies View RelatedAutoCAD Inventor :: Lofted Flange Extra Bend?
Nov 22, 2013I have tried to do a lofted flange. It works, but there is an extra bend that I don't understand why it is there. The bends, I would assume, should be symmetrical but they are not. I have attached the part.
View 5 Replies View RelatedAutoCAD Inventor :: Sheet Metal - Extra Material In Corner
Oct 28, 2011I am attempting to model an existing part as it is currently being manufactured a simple hopper, and am having an issue with a corner.
Look at the converging corner of the attached file.
How could this be done to avoid the problem? Or can it? 2010 Suite-SP4 64bit
AutoCAD Inventor :: IProperties - Adding Extra Text To Existing Fx String
Jun 26, 2012I am populating iProperty "Description" field using expressions from the custom fields. These custom fields are exported from the parameters.
Is there a way of typing in extra plain text into the field onto the end of the expression without losing the expression formula?
Inventor 2010 Pro SP4, Vault Collaboration 2010
HP Z820 Xeon E5-2643 0 @ 3.3Ghz 16.0GB RAM
Nvidia Quadro 5000
AutoCAD Inventor :: How To Automatically Show The Tweak Lines Or Center Lines On Explode Path
Dec 16, 2011I know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013
Vault Collaboration 2013
AutoCAD Inventor :: Make 2 To Sketch Lines Instead Of Floating Lines?
Jan 28, 2013Is there any way to make 2 to sketch lines instead of floating lines so that I can dimension them?
For example, if I have a part that can change lengths and I need to print off a new drawing, it would be good if I could say that the lines were a set distance from each end of the part or some features of the part.
Then I could update the part length, then just open the part drawing and not have to adjust anything.
AutoCAD Inventor :: Edit Dim Lines And Center Lines
Sep 2, 2010I am new to Inventor after using Unigraphics for a while and finding the modelling side very similar so no problems there. the problems are starting when i am producing drawings.
I am trying to manually break a dimension extension line around an inserted symbol ( surface finish symbol) and can't figure this out. I have noticed that Inventor automatically break dimensions round other dimensions but is there a way to add a manual break?
Also is there a way to break a center-line round dimension text? i have added a picture with the problem.
AutoCAD Inventor :: Breaking Dim Extension Lines As They Cross Over Other Dim Extension Lines
Nov 29, 2011I'm using Inventor 2011 and I can't figure out how to set my dimension settings so it breaks the dimension extension lines automatically when crossing over other dimension extension lines. I saw that others say it just happens, but it is not "just happening" for me. how to set my dimensions so when dimension lines cross each other one of them automatically breaks?
View 9 Replies View RelatedAutoCAD 2013 :: Get All Extra Linetype From Wblock DWG
Jun 19, 2013Having an issue with linetypes that are proprogating within all our drawings in our office... I have tried to purge, delete all and wblock and nothing seems to work. The only thing that I found to work is superpurge...
Junk is the drawing that I erased everything. (junk drawing is 2.6M with nothing in it...) click on this link to download... [URL]........
I wblocked out wblock drawing and the size fell but the file still has all the linetype...
If I draw something in wblock and copy clip it to another drawing then I get all the extra linetype from wblock dwg...
AutoCAD 2013 :: SketchUp Plugin - Extra Wireframe
Jul 30, 2013I recently installed the SketchUp plugin in the hope that I would be able to easily and effectively transfer SketchUp models into AutoCAD and subsequently into Revit.
However, upon importing the SketchUp model, extra wireframe is added to the flat surfaces from vertex to vertex. This does not affect the CAD model as such as it appears that these lines are necessary for CAD to create the surfaces.
Though when imported into Revit from CAD, these surfaces are unable to be processed and the model becomes incomplete, also failing to identify the windows and doors that had been previously identified as the model had been taken from Revit, through CAD and to SketchUp with no problems and then all the way back again.
What is the next step of importing it back to Revit as I am unsure how to retain its levels (i.e Floor plans).
AutoCAD Civil 3D :: Triangulation - Adding Extra Breaklines
Apr 4, 2013how to fix this triangulations. Adding extra breaklines does not seem to fix the issue.
View 9 Replies View RelatedAutoCad 3D :: Cannot Trim Extra Portion From Fillet Surface
Feb 19, 2013I am trying to make a 3d model in autocad. But I have stuck in a problem. When I fillet the surface then I can not trim the extra portion. I am attaching the dwg file. I use autocad 2012.
Trim problem.dwg
AutoCAD Civil 3D :: Template That Opens With Extra Prospector Items
Mar 1, 2012We have a template that opens with extra Prospector items. For example, we have point groups Design Points, Design Points.1, Design Points.2, etc etc. See attached image. We have gone into the template and deleted all of the duplicate items.
When we use the template, it creates all of these duplicate things again and the template has the items again.how to permanently remove these items?
AutoCAD Civil 3D :: 2013 Quick Properties And Extra Clicks
Jul 13, 2012With QP activated, if I select an object (say an alignment or profile view) on the screen and want to pick its GRIP, I have to click the screen FIRST to get focus back to the drawing window (so two clicks). The same applies to the contextual Ribbon, it takes two clicks to 'press' a ribbon button if QP is activated.
View 9 Replies View RelatedAutoCAD Civil 3D :: Get Extra Column Of Grid To Left Of Sections?
Mar 29, 2013I am trying to get an extra column of grid to the left of my sections. Is this a way to do this? Do I need to have white space in this area and not a grid?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
AutoCAD Civil 3D :: Description Keys - How To Get Rid Of Extra 0s In Imported Points
Dec 20, 2012I have a user that imported srrvey points and after getting all the points in and set up has discovered that the point over 100 have an extra 0 in between the letter identifer and the point number so instead of A100 he has A0100 , there are several hundred point descriptions to change is there a way to get rid of all the extra 0's without editing each one.
View 3 Replies View RelatedAutoCAD Civil 3D :: How To Create A Filter To Not Display Extra Layer
Jun 7, 2012In my layer properties manager. If I insert an xref I get all kinds of extra layers. I have to scroll through a long list. How can I create a filter to not display these?
View 6 Replies View RelatedAutoCAD Civil 3D :: Removing Extra In And Out Invert Elevation From Labels
May 9, 2013Is there a way to remove the extra (In) and (out) invert elevation from my labels? If the IN or OUT (I.E.) is the same there is no need to label them twice. So, can I remove them? If you can remove them, how do you do it?
This is what I have
NEW CATCH BASIN A-11
TOP=427.30
I.E.(IN)=421.60
I.E.(IN)=421.60
I.E.(OUT)=421.60
AutoCAD Visual LISP / AutoLISP :: Deleted The Extra Layers
Dec 3, 2013I found a lisp in an old post and I edited it alittle with my own layers to have it change to but when I use it, it doesn't deleted the extra layers. It says layer cannot be deleted. Below is part of the code that I am using, I didn't copy all of them since there are alot of layers in the lisp that I added. maybe I copied something wrong I am not sure.
{code}
( defun c:FIXMYLAYERS ( / ss_newlayer change_en )
( setq layerlist ( list ( cons "ENB_ROW-1" "ENB-ROW-1" )
( cons "Border_Condoc_DwgMgmt_Large$0$G-ANNO-TTLB" "DefPoints" )
( cons "Border_Condoc_DwgMgmt_Large$0$G-ANNO-TTLB-LOGO" "DefPoints" )
( cons "Border_Condoc_DwgMgmt_Large$0$G-ANNO-TTLB-NPLT" "DefPoints" )
[Code]...