AutoCAD Civil 3D :: Get Extra Column Of Grid To Left Of Sections?
Mar 29, 2013
I am trying to get an extra column of grid to the left of my sections. Is this a way to do this? Do I need to have white space in this area and not a grid?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
Using Architecture 2012 and seem unable to get a column grid to show automatically in elevation views. Looks fine in plan view, bubbles etc all working once we sorted out annotative setting .
I have blocks forming a column, and I need to allow the user to select the top block of the column but return the bottom left corner of bounding box of the bottom block in the column.
(DEFUN NXT-INSPNT (/ BLKLST CURENT CUROBJ IDX IPNT MCMD NENT SEL SS VENT) (PROMPT " >> Pick the Category HEADER to add note:") (SETQss nilss (SSGET ":E:S" (LIST (CONS 0 "INSERT"))) ) (IF ss (PROGN (SETQ sel (ENTGET (SSNAME ss 0)) iPnt (CDR (ASSOC 10 sel)) ) (princ iPNT) (setvar "attreq" 0) (VL-CMDF "-INSERT" "LEG-NOTE" "S" 1 iPnt 0 PAUSE)
[Code] ....
I'm not exactly sure where my code is failing but I get the following error.
I am using AutoCAD 2013 - Educational Version, and I want to convert my linework into a column grid. For some reason the COLUMNGRIDADD command is not being recognized by the program. When I type it in the command line, it just says Unknown Command.
Additionally, my Build Panel is missing from the ribbon, which is the other source for the column grid tools. I tried to reload or change the CUI, but so far this has not been successful.
We are looking for a column grid bubble dynamic block that will allow us to place horizontal or vertical grid lines while the text in the bubble remains in the upright position.
Another thing we need is to allow for column lines close together without overlapping bubbles. In other words, we need to have the ability to have a diagonal line from the bottom or side of the bubble to the column line which allows us to have all bubbles aligned no matter how close the columns grid lines are.
The attribute in the bubble has to be able to have XX.X to fit within the bubble with the first to X's to be either Alpha or Numeric and the last X to be Numeric only.
i open a new picture i have to first ctr h to turn off the extra grid lines in order to view my pcitures , is there a way to turn off the extra grid lines permanently so i dont have to do it every time i open a new picture?
they have an Illustrator file very useful to work with columns and grids. Howerver i cannot manage to paste the pink grid and columns to the next Artboard. I unlocked but that is not the solution. It seems the column grid is made from something else like a Path.
2) By the way, InDesign has a very cool feature named "Paste in Place" which will paste any object to next page in the exact position. Does Illustrator has something like that?
I have created a polar grid in illustrator with many sections. I want to be able to enter text in every section of the grid and not just along the path lines. How do i create text frames so each grid section within the polar grid is separate and therefore allows me to click on it and enter text. I would also like to change the colour of all the polar grid sections individually. I think it might have something to do with threaded text but not sure.
There is a way of controlling how much some objetcs extend outside the scope box? The levels, sections and grids extend too much to my taste and the space avaliable in my sheet.
Understanding that composite volumes are typically more accurate, I have a reason to evaluate the volume between two surfaces via a grid volume. Easily created a grid volume surface using a 50' grid (50' is large for this site, but wanted to get a feel for calculation time).
Question: Can you change the grid size without creating a new grid surface? Ultimately I woud like to explore the difference in volumes based on grid sizing without creating a long list of surfaces. One would expect that you could chage the grid spacing in surface properties, but the values are non-editable.
I am trying to work on a previous file in my office, and when it opens on mycomputer, it does not display as it should.
In general, the purpose of the project is to reinstate the side slopes of a road abutting a river. Cut & fill sections have been generated on 20m station increments along the road corridor/surfaces in order to calulate cut and fill as well as to reference the design to flood levels.
When I open the file, all of these sections (and there are alot) have relocated themselves to various locations in model space, none of which are aligned with the viewports that are being used for printing.
Could it be software and/or hardware incompatibility with the computer they were originally created on? (I believe it was created with C3D 2010, or C3D 2011 - I am currently running 2012)
We have a template that opens with extra Prospector items. For example, we have point groups Design Points, Design Points.1, Design Points.2, etc etc. See attached image. We have gone into the template and deleted all of the duplicate items.
When we use the template, it creates all of these duplicate things again and the template has the items again.how to permanently remove these items?
With QP activated, if I select an object (say an alignment or profile view) on the screen and want to pick its GRIP, I have to click the screen FIRST to get focus back to the drawing window (so two clicks). The same applies to the contextual Ribbon, it takes two clicks to 'press' a ribbon button if QP is activated.
I have a user that imported srrvey points and after getting all the points in and set up has discovered that the point over 100 have an extra 0 in between the letter identifer and the point number so instead of A100 he has A0100 , there are several hundred point descriptions to change is there a way to get rid of all the extra 0's without editing each one.
In my layer properties manager. If I insert an xref I get all kinds of extra layers. I have to scroll through a long list. How can I create a filter to not display these?
Is there a way to remove the extra (In) and (out) invert elevation from my labels? If the IN or OUT (I.E.) is the same there is no need to label them twice. So, can I remove them? If you can remove them, how do you do it?
This is what I have
NEW CATCH BASIN A-11 TOP=427.30 I.E.(IN)=421.60 I.E.(IN)=421.60 I.E.(OUT)=421.60
In Bill of material i have custom PartQty column and is beside QTY column. I need all informations from QTY column to PartQty column to copy. Possible with iLogic? I'm selecting now manualy copy and paste but it would be nice to have automatic.
Why does the capture date in the metadata panel not match the capture date seen in the grid extra view and how do I fix it? The images that I have in my library are digitized negatives and I've corrected the capture dates and times to be accurate; however, the capture date and in the metadata window shows what I've changed it to and the date in both the grid extra view and the Metadata>Edit Capture Time... options both reflect the date the image was last modified. Not all of the images in my library are this way and some show the correct information. When sorted by Capture Time, all images fall exactly where they should in the proper order (based on the changed, corrected edit time and not the modified date). I saved metadata to the file with the new date but it didn't fix it.
I used the function paste to combine three surfaces in one. It could represent a highway. I noticed that when surfaces cross or pass close to each other some extra triangles show up trying to stitch together the surfaces. I can not find an option that can stop this, eg "not create extra triangles". Why these extra triangles occur? Can you limit it?
Any way to make Acad C3D hold the value for MTEXTCOLUMN = 0? I am having issues with it resetting my column width to 0, even after I have formatted all the Mtext to read how I want it shown. Once I close a drawing and open it again, the formatting changes that I have previously set return to "dynamic" and column width = 0. I just want to turn off the dynamic setting so it stops messing up the formatting, but I can't get it to retain the dynamic setting. Currently running C3D 2012.
Is this possible if i can change the column names, not a cell. For instance: Name of the column is "Full Description" to become something else? Or add a new column with my own description?
I continue to suffer project downtime and setbacks due to a variety of defects in the software. Here formula columns are not working. I created a Formula Column for simply computing ItemQTY *Item Cost in a Data Extraction table for a current project.
QTO is defective, and now Data Extraction is not working. What does the product leadership expect us to do for quantity analysis?How can Quality Control of this software significantly improve?
I have sevreal corridors with various spurs. The contractor wants the cut/fill volume in sections along the corridors, not one big cut/fill calc. Is there a way to do this in C3D? I have got the volume table with the chainages on, but he does not want a cumulitive figure for the whole corridor.
We have created sections from our corridor. We see FG and EG, we can use bands for EG from surface. How do we get the FG band to show the elevations for FG? The only option we have is the EG surface. We have tried to create a surface form the corridor in the corridor properties but that surface still doesn't show up in the surface list in the bands. I would have thought this info would be dynamic and come directly from the corridor would it not?
I am working on a project for a park in which they are looking for a new access road and a parking lot. I created the road and sections for it, now im looking to get material cut/fill from the sections. I am having a tough time getting them to work. The only thing I can get to work is if i created a volume surface comparing my eg to my fg surface. That will give me a cut and fill material amount for my new road
What i am trying to get is the volume report for each sections, so i can get the cut/fill for each section. I have followed the tutorials and tried everything, but nothing seems to work. I created a surface from my corridor, and for some reason when i go to edit my materials, i cant add my proposed surface from my corridor to make the comparison from, and i think thats my problem. Everytime i go to create my volume report, i get all 0's.