I don't understand why Lightroom will not send print commands properly to my Epson Stylus Photo 1400, but all I get is error.
Since the printer works with every other program on my computer, including Elements, it must be a Lightroom problem.
I'm using Lightroom 3.6 and an Epson Stylus Photo R800. This printer is capable of printing very high quality pictures, as I know by using it for almost 5 years. I have bought Lightroom about 6 month ago. I have tried anything I can think off to get those fabulus pictures out of my Epson printer. I alterd color managment settings, changed print resolutions, downloaded new printerdriver, ... Nothing works. Print quality when printing from Lightroom is very poor. Bad colors (dark), stripes over the whole image, it looks like nothing realy. One of the things that I noticed is that the maximum resolution for printing in LR is 720 ppi. My Epson is capable of 1550 ppi. I see a lot of discussion going about print quality with lightroom... I think however this is a more basic problem. My print qualiti is realy very very bad...
Note, When I export a picture to .jpg format (I shoot in RAW only), and print this directly from Windows, I do get the perfect picture a was used to... I cannot believe that Lightroom is unable to do the same.
I have a iMac 27" Mac with OSX Lion running Photoshop CS5...When i print to my Epson Stylus 1400 color printer I get the following error message...Disc Not Available...All other printing works
View 1 Replies View RelatedIs anyone using the Epson Stylus Photo 890 with Vista 64 bit? I cannot find drivers or profiles for that combination of OS and Printer. I have searched everywhere on the web.I need drivers or this printer is history ( yes it already is history but still works fine otherwise).
View 2 Replies View RelatedWhen I try to print a photo thru Photoshop to Epson stylus photo 2200, I get a meassge: paper out or not loaded correctly. Photoshop will print to another printer and the Epson will print from other appllications such as Word. It seem Photoshop and Epson are not communicating properly. The p[rintilng gliltch followed on the heels of Epson printing several images that were nowhere close to the images in Photoshop. recently, I added somw upadtes — a driver and at least one program update. I un;installed and reinstalled the CS 5, but the problem persists.
View 3 Replies View RelatedI have recently upgraded my system to Vista 64 and PS CS4 from Windows XP and PS CS3. Now when I print my photos have a severe green cast. I have tried turning off CM at the printer, in PS, both and on in each place and both, nothing seems to work. I have DL'd the paper profiles as well, still doesn't work.
View 3 Replies View RelatedI recently upgraded to CorelDRAW X5 from X4. I'm having problems printing a landscape page to an Epson Stylus Pro 7880. This is a paper roll feeder. No matter what combination of settings I try it will only print portrait orientation. I had zero problems with X4. I have read as many of the previous forum posts I could find on this issue, so I'll add - I don't have a PPD file and the manufacturer does not either.
View 9 Replies View RelatedMy MAC prints fine to my printer using IPHOTo software...the problem is with PE9.
View 4 Replies View RelatedUsing LR 4 print module, 4x6 works fine, but changing to 8x10 still gives me a small print either in the middle of an 8.5x11 sheet or in the upper right corner.
I am using the 8x10 template so the cell shows 8x10, and in page settings I am using US letter (8.5x11) paper, zoom to fill. The image is cropped, but that shouldn't matter, right? It looks fine on screen.
It printed correctly when I printed with PS Elements, but I want to use LR.
Tried attaching a screen shot but that didn't work either.
I can't seem to figure out a problem I'm having trying to print using ABW mode on my Epson 3880 from LR5.3 - it is greyed out an inaccessible. I'm familiar with the safety net that precludes double color management when LR is set to print with a profile. But even when I have output set to "Managed By Printer" I still can't access ABW. It's grayed out. What am I missing here?
View 6 Replies View RelatedI want to print custom size photo with LR4 and my Epson R2880, Epson driver v8.27, on OS X 10.8.4. In LR4 Print Module I set the cell size slightly smaller than an 8x10 (same aspect ratio but smaller by about 0.5 inch on both sides) on a Letter size paper. In the Epson driver I have tried all sort of options but no matter what I try, the print always come out exactly 8x10.
View 4 Replies View RelatedThe subtitle should be "How do I choose the best profile without wasting a lot of time and paper?"
I have an Epson R3000 using Epson premium glossy paper. I am printing from Lightroom (and Photoshop). My understanding has been that the best color match would come from using the Epson appropriate paper profile and letting LR manage the color. However, my output, especially for skin tones had a distinct magenta color cast and really looked terrible. I spent a few hours rechecking settings and making test prints to confirm settings such as turning off color management in the printer. Finally, I called Adobe support. They were very useful and by changing the printer profile from Epson 'spr premium glossy' to my monitor (which is calibrated) profile, I actually get output that matches my screen pretty well. The bothersome part is that I came away with a new understanding that I now have to experiment with profiles when printing.
This is contrary to my earlier understanding that Epson and LR do all the experimentation and that by using the Epson printer, paper and matching profiles I can get reliable color matched output from LR. There must be a reason that printer and paper manufacturers go to the trouble of developing profiles. how to choose the appropriate profile when printing? There is the further question of the best output to send to a professional printer. Should I just set to sRGB?
How to print A3 size borderless portrait using Epson R1500W. I've got this printer 2 days ago and still can not figure aout how to do it. I've got few mm blank in either side of length wise.
View 3 Replies View RelatedHow do I send a photo folder from Lightroom to Dropbox?
View 3 Replies View RelatedI've been trying to print full bleed images to 3880 epson printer from LR 4.1 and for some reason won't let me make 8.5 x11 borderless prints to printer. both the left and right side of image has white borders and top and bottom has none.
both page grids sides go as low as 1 and cell size reads properly of 11.00in x 8.50in. but when you look at image in print mode in LR- it shows white borders on both sides of picture.
been on phone for 3 hrs with adobe and 30 min with epson tech to no avail?
i have lightroom v4 last version 64 and photoshop cs6 64 last updates
i would like to send raw file from lightroom to photoshop without converting in psd or tiff but i would like to send from lightoom to photoshop the raw file
in short open the image in camera raw from lightroom
When I send an LR photo for editing in PS CC, some of the filters are greyed out: artistic, brush strokes, distort, pixelate, sketch, and texture. but when I open the photo directly in PS, they are there.
View 3 Replies View RelatedHaving trouble bringing LR5 up. Had been working fine. Get msg, Could not run script: LibraryFactory.lua Error: Recursive load attempt for namespace: Library View
View 1 Replies View Relatedhow to send a raw photo from lightroom to photoshop as a smart "object" not a flat "image" so it does not flatten the image but so I still get all the adjustments i have made in lightroom to show up in photoshop?
View 2 Replies View RelatedI'm trying to print a block of black text in LR 4.4. It looks just fine when I go into the PRINT module but when the text prints, the letters have a fine black outline but most of the character is white.
View 1 Replies View RelatedOperating system is Windows 7. LR 4.3 installed.
View 8 Replies View RelatedHow can I get Elements 10 to connect properly to my Epson DX8450? It prints fine but gives only WIA support for scan.
View 4 Replies View Relatedin print module main window for image control (not preview window in the left upper corner) is blank. what is the reason and how can be remedied? os Mac Lion 10.7.3 lightroom 4 ( the 3-rd version had the same problem)
View 8 Replies View RelatedLight-room 5.2, Windows 7 Home Premium 64 bit.
I have some scanned photos from a trip to England in 1996. I have assigned to each photo the date it was taken. Lightroom clearly displays the date taken. But two photos will not sort properly by date, as you can see in the screen capture; the highlighted photo was taken August 31, 1996, and sorts between photos taken Sept 2, 1996 and Sept 3, 1996.
My program crashed and upon restarting it some settings have changed. The biggest change is that I am unable to select objects and then execute a command. What the program is doing is when I select the objects I want a particular command executed, it will de-select all of the object and then execute the command. I then will have to reselect my objects. This makes deleting line work a little mor inconvenient. What setting is this and where can I change it back.
View 1 Replies View RelatedHow to ADD (almost) white Border around photo(s) to print in print module (not for creating a JPEG) WITHOUT TRIMMING the photo?
I dont understand why I'm so stupid not to be able to acheeve this simple task with Lightroom WITHOUT TRIMMING the image (altering it's proportion and cutting away photo-content)
(on light-gray backgrownd for instance, to use as cutting indications. I know how to use cutting-indications for images i print without a border)
(i do not whant to use workarounds, the kind of preparing "identity plates", a new one each for infinite variations of proportions to use as fullblown-up backgrounds..)
How do I get my photos printed? I select a photo but I get the maessage that no photo was selected.
View 2 Replies View RelatedWhen I print 11 x 17 paper on Epson R2880 in LR the image begins printing before the leading edge of the paper reaches the printerhead (not prininting borderless.) Only happens in LR and not PS. I am using the LR paper standards for borders.
View 1 Replies View RelatedI am trying to print a 16" x 20" photo through Lightroom's print module. I am using an Epson 3880 printer and 17" x 22" paper. I have done this in Lightroom 4 with no problems. Now I am getting a print that is 16-3/8" x 20-1/2". I have the cell size set at 16" x 20" and borderless printing is turned off. I also checked zoomed to fill. This has also happened on a couple of 12" x 18" photos.
View 2 Replies View RelatedI am trying to print a 22"x40" print on canvas using CS5 with the Epson 7600. The image prints fine until about 2/3 of the way thru and then it just stops. This has happened 3Xs now.
On first attempt the resolution was set at 300dpi and the file was about 400+mb.I've flattened the image and reduced the resolution to 200 making the file about 120mb. Same problem!
I printed the same image (at the larger size) on paper without any problem.
I am unable to print from Photoshop CS6 to two different Epson printers - an Epson 9800 and an Epson 7880. I have tried to print from three different computers (OS 10.6 and OS 10.8) and have also tried three different USB cables. Each time I get the same results - the computer acts like it sends the data to the printer, but the printer never prints anything. I am not getting any error messages. I am attepting to print a 3960x2160, 720 DPI RGB TIF image. I tried printing from Preview as a test but that didn't work either.
I have tried reinstalling drivers, turning the computer and printers on and off, cleared my caches and repaired permissions, but so far no luck.However there is ONE situation in which I am able to print - if I save the image as PDF and print it from from Acrobat, specifically with "Acrobat Color Management" selected, it WILL print. If I try to print from Acrobat with "Printer Manages Colors" selected, it will not print.
