Lightroom :: Print Quality On Epson Stylus Photo R800
Jan 3, 2012
I'm using Lightroom 3.6 and an Epson Stylus Photo R800. This printer is capable of printing very high quality pictures, as I know by using it for almost 5 years. I have bought Lightroom about 6 month ago. I have tried anything I can think off to get those fabulus pictures out of my Epson printer. I alterd color managment settings, changed print resolutions, downloaded new printerdriver, ... Nothing works. Print quality when printing from Lightroom is very poor. Bad colors (dark), stripes over the whole image, it looks like nothing realy. One of the things that I noticed is that the maximum resolution for printing in LR is 720 ppi. My Epson is capable of 1550 ppi. I see a lot of discussion going about print quality with lightroom... I think however this is a more basic problem. My print qualiti is realy very very bad...
Note, When I export a picture to .jpg format (I shoot in RAW only), and print this directly from Windows, I do get the perfect picture a was used to... I cannot believe that Lightroom is unable to do the same.
View 6 Replies
ADVERTISEMENT
Apr 27, 2012
I don't understand why Lightroom will not send print commands properly to my Epson Stylus Photo 1400, but all I get is error.
Since the printer works with every other program on my computer, including Elements, it must be a Lightroom problem.
View 2 Replies
View Related
May 24, 2009
Is anyone using the Epson Stylus Photo 890 with Vista 64 bit? I cannot find drivers or profiles for that combination of OS and Printer. I have searched everywhere on the web.I need drivers or this printer is history ( yes it already is history but still works fine otherwise).
View 2 Replies
View Related
Dec 16, 2012
When I try to print a photo thru Photoshop to Epson stylus photo 2200, I get a meassge: paper out or not loaded correctly. Photoshop will print to another printer and the Epson will print from other appllications such as Word. It seem Photoshop and Epson are not communicating properly. The p[rintilng gliltch followed on the heels of Epson printing several images that were nowhere close to the images in Photoshop. recently, I added somw upadtes — a driver and at least one program update. I un;installed and reinstalled the CS 5, but the problem persists.
View 3 Replies
View Related
May 18, 2009
I have recently upgraded my system to Vista 64 and PS CS4 from Windows XP and PS CS3. Now when I print my photos have a severe green cast. I have tried turning off CM at the printer, in PS, both and on in each place and both, nothing seems to work. I have DL'd the paper profiles as well, still doesn't work.
View 3 Replies
View Related
Feb 6, 2013
I recently upgraded to CorelDRAW X5 from X4. I'm having problems printing a landscape page to an Epson Stylus Pro 7880. This is a paper roll feeder. No matter what combination of settings I try it will only print portrait orientation. I had zero problems with X4. I have read as many of the previous forum posts I could find on this issue, so I'll add - I don't have a PPD file and the manufacturer does not either.
View 9 Replies
View Related
Apr 10, 2012
I have a iMac 27" Mac with OSX Lion running Photoshop CS5...When i print to my Epson Stylus 1400 color printer I get the following error message...Disc Not Available...All other printing works
View 1 Replies
View Related
Nov 5, 2012
My MAC prints fine to my printer using IPHOTo software...the problem is with PE9.
View 4 Replies
View Related
Jan 2, 2012
Any way to improve a photo in GIMP so that it can be printed in larger formats? Enlarging seems to be okay, adding a black bg and setting layer mode to overlay also seems to have worked, but as I am aiming at selling my photos, I want to be 100% sure I deliver a good enough product!
View 1 Replies
View Related
Nov 26, 2012
Using LR 4 print module, 4x6 works fine, but changing to 8x10 still gives me a small print either in the middle of an 8.5x11 sheet or in the upper right corner.
I am using the 8x10 template so the cell shows 8x10, and in page settings I am using US letter (8.5x11) paper, zoom to fill. The image is cropped, but that shouldn't matter, right? It looks fine on screen.
It printed correctly when I printed with PS Elements, but I want to use LR.
Tried attaching a screen shot but that didn't work either.
View 1 Replies
View Related
Mar 12, 2014
I can't seem to figure out a problem I'm having trying to print using ABW mode on my Epson 3880 from LR5.3 - it is greyed out an inaccessible. I'm familiar with the safety net that precludes double color management when LR is set to print with a profile. But even when I have output set to "Managed By Printer" I still can't access ABW. It's grayed out. What am I missing here?
View 6 Replies
View Related
Jan 29, 2014
I have a photocopy of a newsprint photograph...
I know I can use BLUR etc to convert it to photo print quality, but am unsure of the steps...
View 2 Replies
View Related
Feb 16, 2014
I want to print custom size photo with LR4 and my Epson R2880, Epson driver v8.27, on OS X 10.8.4. In LR4 Print Module I set the cell size slightly smaller than an 8x10 (same aspect ratio but smaller by about 0.5 inch on both sides) on a Letter size paper. In the Epson driver I have tried all sort of options but no matter what I try, the print always come out exactly 8x10.
View 4 Replies
View Related
Jul 2, 2013
The subtitle should be "How do I choose the best profile without wasting a lot of time and paper?"
I have an Epson R3000 using Epson premium glossy paper. I am printing from Lightroom (and Photoshop). My understanding has been that the best color match would come from using the Epson appropriate paper profile and letting LR manage the color. However, my output, especially for skin tones had a distinct magenta color cast and really looked terrible. I spent a few hours rechecking settings and making test prints to confirm settings such as turning off color management in the printer. Finally, I called Adobe support. They were very useful and by changing the printer profile from Epson 'spr premium glossy' to my monitor (which is calibrated) profile, I actually get output that matches my screen pretty well. The bothersome part is that I came away with a new understanding that I now have to experiment with profiles when printing.
This is contrary to my earlier understanding that Epson and LR do all the experimentation and that by using the Epson printer, paper and matching profiles I can get reliable color matched output from LR. There must be a reason that printer and paper manufacturers go to the trouble of developing profiles. how to choose the appropriate profile when printing? There is the further question of the best output to send to a professional printer. Should I just set to sRGB?
View 7 Replies
View Related
Sep 20, 2012
I am getting black pixals that show up around my photo when I export to PDF High Quality Print and print. Some of my other photos have the pixals show up when I open them up in preview but they are white. How are you able to get rid of these?
Here is the image. If you click on it you will see the white pixals.
View 3 Replies
View Related
Jan 19, 2013
How to print A3 size borderless portrait using Epson R1500W. I've got this printer 2 days ago and still can not figure aout how to do it. I've got few mm blank in either side of length wise.
View 3 Replies
View Related
Oct 1, 2012
I've been trying to print full bleed images to 3880 epson printer from LR 4.1 and for some reason won't let me make 8.5 x11 borderless prints to printer. both the left and right side of image has white borders and top and bottom has none.
both page grids sides go as low as 1 and cell size reads properly of 11.00in x 8.50in. but when you look at image in print mode in LR- it shows white borders on both sides of picture.
been on phone for 3 hrs with adobe and 30 min with epson tech to no avail?
View 13 Replies
View Related
Mar 22, 2013
how to export my images to a file on my computer in JPEG in a high quality for printing large prints? I have done several to e-mails and facebook. But struggling to figure out how to do it correctly for prints. I would like to submit them to a photo lab, but I am afraid I don't have the correct settings.
View 1 Replies
View Related
Oct 14, 2012
How to ADD (almost) white Border around photo(s) to print in print module (not for creating a JPEG) WITHOUT TRIMMING the photo?
I dont understand why I'm so stupid not to be able to acheeve this simple task with Lightroom WITHOUT TRIMMING the image (altering it's proportion and cutting away photo-content)
(on light-gray backgrownd for instance, to use as cutting indications. I know how to use cutting-indications for images i print without a border)
(i do not whant to use workarounds, the kind of preparing "identity plates", a new one each for infinite variations of proportions to use as fullblown-up backgrounds..)
View 1 Replies
View Related
Oct 13, 2012
How do I get my photos printed? I select a photo but I get the maessage that no photo was selected.
View 2 Replies
View Related
Aug 3, 2013
When I print 11 x 17 paper on Epson R2880 in LR the image begins printing before the leading edge of the paper reaches the printerhead (not prininting borderless.) Only happens in LR and not PS. I am using the LR paper standards for borders.
View 1 Replies
View Related
Aug 19, 2013
I've been trying so hard to upload high quality photos on facebook but the compression used by facebook is just so bad that all the hours used to edit the photos is left in vain. There seem to be an action uploadable on Photoshop to keep the quaity of the photo before uploading it to facebook. Is there a similar action/present for lightroom 5 as well?
View 2 Replies
View Related
Jun 29, 2013
I am trying to print a 16" x 20" photo through Lightroom's print module. I am using an Epson 3880 printer and 17" x 22" paper. I have done this in Lightroom 4 with no problems. Now I am getting a print that is 16-3/8" x 20-1/2". I have the cell size set at 16" x 20" and borderless printing is turned off. I also checked zoomed to fill. This has also happened on a couple of 12" x 18" photos.
View 2 Replies
View Related
Jan 19, 2012
I am trying to print a 22"x40" print on canvas using CS5 with the Epson 7600. The image prints fine until about 2/3 of the way thru and then it just stops. This has happened 3Xs now.
On first attempt the resolution was set at 300dpi and the file was about 400+mb.I've flattened the image and reduced the resolution to 200 making the file about 120mb. Same problem!
I printed the same image (at the larger size) on paper without any problem.
View 2 Replies
View Related
Sep 10, 2012
I am unable to print from Photoshop CS6 to two different Epson printers - an Epson 9800 and an Epson 7880. I have tried to print from three different computers (OS 10.6 and OS 10.8) and have also tried three different USB cables. Each time I get the same results - the computer acts like it sends the data to the printer, but the printer never prints anything. I am not getting any error messages. I am attepting to print a 3960x2160, 720 DPI RGB TIF image. I tried printing from Preview as a test but that didn't work either.
I have tried reinstalling drivers, turning the computer and printers on and off, cleared my caches and repaired permissions, but so far no luck.However there is ONE situation in which I am able to print - if I save the image as PDF and print it from from Acrobat, specifically with "Acrobat Color Management" selected, it WILL print. If I try to print from Acrobat with "Printer Manages Colors" selected, it will not print.
View 3 Replies
View Related
Jun 28, 2013
My new MacBookPro using Photoshop CS4 prints just fine to my Epson 2400 and 1900 however when using my new 4900 I click "print" and the printer icon bounces once in the dock and then disappears. The printer then gyrates and makes noise but puts out no image.
I can print documents and images from Preview and Pages and the web on the 4900 so I know the printer can print. I have reloaded CS4 several times from my disc and the Epson driver several times to no avail.
The Epson tech guy says what appears obvious, that the printer is working fine but that PS cannot communicate with the 4900.
View 3 Replies
View Related
Oct 31, 2013
When I try to print Photoshop shuts down. I have the newest driver from Epson and their customer support said to check with Adobe.
View 1 Replies
View Related
Jan 21, 2013
It does, however, print happily to a USB Epson 2200 plugged into the same machine. All other apps on this Mountain Lion Mac Mini, including CS4 Illustrator, print fine to the 4900. I have tried both a USB and a network connection to the printer with the same result. There is *some* small output to the printer (just a flash on the print monitor), but no output results.
View 2 Replies
View Related
Oct 30, 2012
Photoshop will not print on my epson 837 but will print on other printers and other apps can print on this 837.
I do get an error message that I should reset the Printer's color management in the Printer's dialog box, but when I click Print to get to the dialog, it just disappears.
PS - I have uninstalled and reinstalled the printer on the mac; then again after downloading a fresh driver from epson...though this is unlikely to be the problem since I have now confirmed that every other app prints just fine.
I deleted all of my paper presets and tried making new ones... I keep getting this error msg and don't know what it means or how to correct the color sync:
ColorSync color matching may produce different results than printer color management. Either Photoshop color management or printer color management is recommended.
View 1 Replies
View Related
Dec 17, 2012
On my MacBook OSX 10. 8.2 I can't print with my Epson printer. Yet I can print with Photoshop CS 5.
View 3 Replies
View Related
May 13, 2008
I have a problem with CS3... When I want to print a 100x300cm or longer banner with Epson 9800 the print preview of Epson doesn't show the complete document. A1 to B0 jobs has no problem. At the print preview 1/3 or 1/4 of the banner is blank...With CS2 there is no problem.
I install the updates for CS3 but problem is still on.
I sellected the PDF printer as default.(I read this in a forum)
I have 2 9800, 1 9880 and 5 4800 on a network...
With CS3: If I save the banner in PSD, PDF, JPEG, TIF format doesn't matter. Same problem.
I try the job on Corel X3 as JPEG it doesn't read anything on some PC's, the print preview is blank. Some PC's read the document with Corel X3.
I think I have to go back to CS2.......
View 6 Replies
View Related
