Photoshop :: Unable To Print With CS6 On Mac OS X 10.8.2 On Epson 837
Oct 30, 2012
Photoshop will not print on my epson 837 but will print on other printers and other apps can print on this 837.
Â
I do get an error message that I should reset the Printer's color management in the Printer's dialog box, but when I click Print to get to the dialog, it just disappears.
Â
PS - I have uninstalled and reinstalled the printer on the mac; then again after downloading a fresh driver from epson...though this is unlikely to be the problem since I have now confirmed that every other app prints just fine.
Â
I deleted all of my paper presets and tried making new ones... I keep getting this error msg and don't know what it means or how to correct the color sync:
Â
ColorSync color matching may produce different results than printer color management. Either Photoshop color management or printer color management is recommended.
View 1 Replies
ADVERTISEMENT
May 10, 2012
Why can't I get my Epson Printer to print the colors on the monitor>  First time this is happening.  Printer is new...ink okay...and history with the printer has been okay.  Took some photo's yesterday...blue heron, picking up a fish in a pond.  Water is blue...heron is grey and white and has other yellowish and maroon coloring as well. The fish he caught was a gold fish.  The colors on the monitor are wonderful.
Â
The photo's were cropped severely.  But are still clear.   Now the water is pink...and the heron is a disgusting color of grey green.  Have chosen ICM...chosen Adobe color profile. Used premium glossy white papers, Epson inks. Â
Â
Tried printing it out without ICM and with different papers....still the same...Either everything is hot pink, or dull gray brown. This was my first ever heron photo that had any merit, and I so want to print it out for everyone to see. I was so lucky to catch the fishing capture. Does the cropping have anything to do with the printing of the photo?
View 3 Replies
View Related
Sep 10, 2012
I am unable to print from Photoshop CS6 to two different Epson printers - an Epson 9800 and an Epson 7880. I have tried to print from three different computers (OS 10.6 and OS 10.8) and have also tried three different USB cables. Each time I get the same results - the computer acts like it sends the data to the printer, but the printer never prints anything. I am not getting any error messages. I am attepting to print a 3960x2160, 720 DPI RGB TIF image. I tried printing from Preview as a test but that didn't work either.
Â
I have tried reinstalling drivers, turning the computer and printers on and off, cleared my caches and repaired permissions, but so far no luck.However there is ONE situation in which I am able to print - if I save the image as PDF and print it from from Acrobat, specifically with "Acrobat Color Management" selected, it WILL print. If I try to print from Acrobat with "Printer Manages Colors" selected, it will not print.
View 3 Replies
View Related
Jun 28, 2013
My new MacBookPro using Photoshop CS4 prints just fine to my Epson 2400 and 1900 however when using my new 4900 I click "print" and the printer icon bounces once in the dock and then disappears. The printer then gyrates and makes noise but puts out no image.Â
I can print documents and images from Preview and Pages and the web on the 4900 so I know the printer can print. I have reloaded CS4 several times from my disc and the Epson driver several times to no avail.
The Epson tech guy says what appears obvious, that the printer is working fine but that PS cannot communicate with the 4900.
View 3 Replies
View Related
Oct 31, 2013
When I try to print Photoshop shuts down. I have the newest driver from Epson and their customer support said to check with Adobe.
View 1 Replies
View Related
Jan 21, 2013
It does, however, print happily to a USB Epson 2200 plugged into the same machine. All other apps on this Mountain Lion Mac Mini, including CS4 Illustrator, print fine to the 4900. I have tried both a USB and a network connection to the printer with the same result. There is *some* small output to the printer (just a flash on the print monitor), but no output results.Â
View 2 Replies
View Related
Dec 17, 2012
On my MacBook OSX 10. 8.2Â I can't print with my Epson printer. Yet I can print with Photoshop CS 5.
View 3 Replies
View Related
May 13, 2008
I have a problem with CS3... When I want to print a 100x300cm or longer banner with Epson 9800 the print preview of Epson doesn't show the complete document. A1 to B0 jobs has no problem. At the print preview 1/3 or 1/4 of the banner is blank...With CS2 there is no problem.
I install the updates for CS3 but problem is still on.
I sellected the PDF printer as default.(I read this in a forum)
I have 2 9800, 1 9880 and 5 4800 on a network...
With CS3: If I save the banner in PSD, PDF, JPEG, TIF format doesn't matter. Same problem.
I try the job on Corel X3 as JPEG it doesn't read anything on some PC's, the print preview is blank. Some PC's read the document with Corel X3.
I think I have to go back to CS2.......
View 6 Replies
View Related
Jan 19, 2012
I am trying to print a 22"x40" print on canvas using CS5 with the Epson 7600. The image prints fine until about 2/3 of the way thru and then it just stops. This has happened 3Xs now.Â
Â
On first attempt the resolution was set at 300dpi and the file was about 400+mb.I've flattened the image and reduced the resolution to 200 making the file about 120mb. Same problem!
Â
I printed the same image (at the larger size) on paper without any problem.
View 2 Replies
View Related
Jul 14, 2012
I have an Epson 1400, and it was working fine this morning. I usually go to Print Settings to select my glossy paper. But just now, when I went to print, and tried to click the Print settings... button, nothing happens. I have tried using Software Update and installed the latest Epson Printer Software, and tested several other applications, and the printer is connected and working fine in those.
View 7 Replies
View Related
May 30, 2009
I am using the Adobe Master Collection CS4, and use an Epson RX650 printer, but for the life of me I cannot get Photoshop to print what is on the screen.The prints are dark, and no where near the ones on the screen. I am using genuine Epson Ink, and Premium glossy paper, so as to remove this issue, is this a case of my screen needing to be calibrated? I have considered buying the Spyde Studio calibrator to ensure that this is correct, (do I need to?) and I have read as much as I can about setting up Adobe to manage the print settings and colours, but still no luck. My current settings are as follows In Adobe Bridge, my creative suit color settings are set to Europe General Purpose 2The in Adobe Photoshop (version 11.0.1) I am selecting under colour management, Document Adoby RGB (1998), Photoshop handles colours, Printer profile is Epson sRGB Colour Space, Rendering intent is Relative Colourimetric, and I have ticked the following boxs, Blackpoint compensation, Match print colours, Gamut warning and Show paper white.
View 15 Replies
View Related
Aug 29, 2013
I cannot print photographic images with my desktop MAC (OS X10.8.4) from Photoshop Elements 9.0 to my new Epson XP-800 printer. Printing is not a problem with Word text or images from iPhoto- it is only with PSE that there is a problem. The problem persists even if I try using a cabled connection rather than WiFi. I have ensured latest software from Epson has been downloaded. This problem did not occur when using the same system with the previous printer (Epson Photo Stylus 1290).
Â
rather than just a workaround of moving the edited PSE image back to iPhoto & printing from there (which admittedly does work but shouldn't be necessary).
View 7 Replies
View Related
Jan 1, 2013
windows7  Epson 2880 printer I can print in Lightroom with no problem. CS6 was printing okay. Now when I try printing it says proceeding , but nothing happens. Cs6 does not crash. Just won 't print. My printer dialog box says error printing then recover file , but when i try again nothing. everything else seems okay. I restarted CS6 and rebooted computer , still no printing. What am Idoing wrong. Is does CS6 haveto be re instalked ?
View 2 Replies
View Related
Jan 24, 2013
I can't print to my Epson R3000 printer from the Photoshop Elements 10 I have installed on a Mac OS 1.7.5
View 2 Replies
View Related
Nov 5, 2012
My MAC prints fine to my printer using IPHOTo software...the problem is with PE9.Â
View 4 Replies
View Related
Sep 10, 2012
These are the options I get for paper size when I try to print from PSE9. I get 4x6 and 5x7 options for print size, just not paper size.Â
View 5 Replies
View Related
Sep 17, 2012
When I attempt to access "page setup" the button just changes color to blue as I click it. I cannot select the media. The printer works fine from Preview but not from CS5. Epson says it's a Photoshop problem.Â
View 6 Replies
View Related
Dec 22, 2013
When trying to print borderless the menu reverts to the smaller size. ie when selecting 5x7 it reverts to 4x6. Ditto 8x10 and 11x14 etc. The paper size stays the same, just the print size reverts and the desired size disappears. I contacted Epson twice and both times I was told it is a software issue, not the printer. The same thing happens in Lightroom, but in WEindows Gallery Live the printer works correctly which indicates the driver and printer are working correctly. I am using Windows 7 and had Elements 9, but Elements 10 came bundled with the printer so I upgraded to 10, no improvement.
View 5 Replies
View Related
Oct 15, 2013
My epson R1900 printer will not print the color green- all inks are full
View 3 Replies
View Related
Oct 28, 2012
I am running Mac 10.6.8 and recently upgraded to PS6. I can no longer print to my Epson 3880 nor can I open NEF files. I have applied all udates from Apple, Epson and Adobe.
View 2 Replies
View Related
Nov 26, 2012
Using LR 4 print module, 4x6 works fine, but changing to 8x10 still gives me a small print either in the middle of an 8.5x11 sheet or in the upper right corner.
Â
I am using the 8x10 template so the cell shows 8x10, and in page settings I am using US letter (8.5x11) paper, zoom to fill. The image is cropped, but that shouldn't matter, right? It looks fine on screen.
Â
It printed correctly when I printed with PS Elements, but I want to use LR.
Â
Tried attaching a screen shot but that didn't work either.
View 1 Replies
View Related
Mar 12, 2014
I can't seem to figure out a problem I'm having trying to print using ABW mode on my Epson 3880 from LR5.3 - it is greyed out an inaccessible. I'm familiar with the safety net that precludes double color management when LR is set to print with a profile. But even when I have output set to "Managed By Printer" I still can't access ABW. It's grayed out. What am I missing here?
View 6 Replies
View Related
Feb 16, 2014
I want to print custom size photo with LR4 and my Epson R2880, Epson driver v8.27, on OS X 10.8.4. In LR4 Print Module I set the cell size slightly smaller than an 8x10 (same aspect ratio but smaller by about 0.5 inch on both sides) on a Letter size paper. In the Epson driver I have tried all sort of options but no matter what I try, the print always come out exactly 8x10.
View 4 Replies
View Related
Jul 2, 2013
The subtitle should be "How do I choose the best profile without wasting a lot of time and paper?"
I have an Epson R3000 using Epson premium glossy paper. I am printing from Lightroom (and Photoshop). My understanding has been that the best color match would come from using the Epson appropriate paper profile and letting LR manage the color. However, my output, especially for skin tones had a distinct magenta color cast and really looked terrible. I spent a few hours rechecking settings and making test prints to confirm settings such as turning off color management in the printer. Finally, I called Adobe support. They were very useful and by changing the printer profile from Epson 'spr premium glossy' to my monitor (which is calibrated) profile, I actually get output that matches my screen pretty well. The bothersome part is that I came away with a new understanding that I now have to experiment with profiles when printing.
This is contrary to my earlier understanding that Epson and LR do all the experimentation and that by using the Epson printer, paper and matching profiles I can get reliable color matched output from LR. There must be a reason that printer and paper manufacturers go to the trouble of developing profiles. how to choose the appropriate profile when printing? There is the further question of the best output to send to a professional printer. Should I just set to sRGB?
View 7 Replies
View Related
Jan 3, 2012
I'm using Lightroom 3.6 and an Epson Stylus Photo R800. This printer is capable of printing very high quality pictures, as I know by using it for almost 5 years. I have bought Lightroom about 6 month ago. I have tried anything I can think off to get those fabulus pictures out of my Epson printer. I alterd color managment settings, changed print resolutions, downloaded new printerdriver, ... Nothing works. Print quality when printing from Lightroom is very poor. Bad colors (dark), stripes over the whole image, it looks like nothing realy. One of the things that I noticed is that the maximum resolution for printing in LR is 720 ppi. My Epson is capable of 1550 ppi. I see a lot of discussion going about print quality with lightroom... I think however this is a more basic problem. My print qualiti is realy very very bad...
Â
Note, When I export a picture to .jpg format (I shoot in RAW only), and print this directly from Windows, I do get the perfect picture a was used to... I cannot believe that Lightroom is unable to do the same.
View 6 Replies
View Related
Jan 19, 2013
How to print A3 size borderless portrait using Epson R1500W. I've got this printer 2 days ago and still can not figure aout how to do it. I've got few mm blank in either side of length wise.
View 3 Replies
View Related
Dec 10, 2012
I am trying to print on photo paper from Ligthroom 4 with the Epson DX8400 printer, on Windows 8. Yet I can't change the paper type. Is it possible that Lightroom doesn't like Windows 8 or is more likely that my printer doesn't like Windows 8?The screenshot shows all that I am offered in the porperties section
View 4 Replies
View Related
Jun 23, 2012
I am trying to print film for screen printing using an epson 1100 workforce. I am not able to select the 'advance setting' box under the separations tab when I try to print separations. I am trying to be able to choose the dot
View 1 Replies
View Related
Oct 1, 2012
I've been trying to print full bleed images to 3880 epson printer from LR 4.1 and for some reason won't let me make 8.5 x11 borderless prints to printer. both the left and right side of image has white borders and top and bottom has none.
both page grids sides go as low as 1 and cell size reads properly of 11.00in x 8.50in. but when you look at image in print mode in LR- it shows white borders on both sides of picture.
been on phone for 3 hrs with adobe and 30 min with epson tech to no avail?
View 13 Replies
View Related
Apr 5, 2013
I cannot import files from an epson scanner V750 pro. The screen reads unable to read preview. I am scanning B/W negatives using 16 bit Grayscale and tiff image format?
View 2 Replies
View Related
Apr 27, 2012
I don't understand why Lightroom will not send print commands properly to my Epson Stylus Photo 1400, but all I get is error.
Â
Since the printer works with every other program on my computer, including Elements, it must be a Lightroom problem.
View 2 Replies
View Related
