Photoshop Elements :: Failure To Print Borderless On Epson Artisan 1430?
Dec 22, 2013
When trying to print borderless the menu reverts to the smaller size. ie when selecting 5x7 it reverts to 4x6. Ditto 8x10 and 11x14 etc. The paper size stays the same, just the print size reverts and the desired size disappears. I contacted Epson twice and both times I was told it is a software issue, not the printer. The same thing happens in Lightroom, but in WEindows Gallery Live the printer works correctly which indicates the driver and printer are working correctly. I am using Windows 7 and had Elements 9, but Elements 10 came bundled with the printer so I upgraded to 10, no improvement.
View 5 Replies
ADVERTISEMENT
Sep 10, 2012
These are the options I get for paper size when I try to print from PSE9. I get 4x6 and 5x7 options for print size, just not paper size.Â
View 5 Replies
View Related
Sep 13, 2012
Image dimension: 297mm x 210mm Printer settings: Borderless, A4 297mm x 210mm Adobe printer settings: Printer manages color management, No centre, No fit to page Result: lower portion of the image is cropped. Adobe printer settings: Printer manages color management, centre image, No fit to page Result: lower portion of the image is cropped. Adobe printer settings: Printer manages color management, No centre, fit to page Result: lower portion of the image is cropped.
Â
When printing same image from paint 6.1, the entire image is printed to a borderless A4 page.
View 1 Replies
View Related
Aug 29, 2013
I cannot print photographic images with my desktop MAC (OS X10.8.4) from Photoshop Elements 9.0 to my new Epson XP-800 printer. Printing is not a problem with Word text or images from iPhoto- it is only with PSE that there is a problem. The problem persists even if I try using a cabled connection rather than WiFi. I have ensured latest software from Epson has been downloaded. This problem did not occur when using the same system with the previous printer (Epson Photo Stylus 1290).
Â
rather than just a workaround of moving the edited PSE image back to iPhoto & printing from there (which admittedly does work but shouldn't be necessary).
View 7 Replies
View Related
Sep 17, 2012
When I attempt to access "page setup" the button just changes color to blue as I click it. I cannot select the media. The printer works fine from Preview but not from CS5. Epson says it's a Photoshop problem.Â
View 6 Replies
View Related
Jan 19, 2013
How to print A3 size borderless portrait using Epson R1500W. I've got this printer 2 days ago and still can not figure aout how to do it. I've got few mm blank in either side of length wise.
View 3 Replies
View Related
Apr 21, 2013
Have been working with Epson tech support to get colors to match the CS5 colors to no avail. Have claibrated my monitor usingHuey calibration unit and no matter what I try cannot get the correct colors.
View 7 Replies
View Related
Jul 3, 2006
Prints from 2400 look good, but darker (about a stop darker) and bit more saturated that seeing on my calibrated Sony Artisan Monitor.
I can get good prints, but I now have to add an adjustment layer to files and lighten them all up, a real hassle. I don't remember this issue ever before.
I've tried all the different rendering intents.
View 9 Replies
View Related
Nov 24, 2012
I have PSE 9. HP 5514 printer. I can print photos borderless through Windows, but not through PSE. In PSE, I have unchecked the box for Border, have checked the Crop to Fit box and Center Image box (and every possible combination thereof). My photo has been sized to 4"x6" in PSE, and I have checked all boxes in the print dialogue for 4"x6". I get a border no matter what I do.Â
View 1 Replies
View Related
Dec 2, 2013
How do i print borderless pictures using elements 10
View 3 Replies
View Related
Jul 4, 2013
What do I have to do to print borderless photos on a LaserJet Pro 200 M251 nw printer?
View 2 Replies
View Related
Jan 24, 2013
I can't print to my Epson R3000 printer from the Photoshop Elements 10 I have installed on a Mac OS 1.7.5
View 2 Replies
View Related
Nov 5, 2012
My MAC prints fine to my printer using IPHOTo software...the problem is with PE9.Â
View 4 Replies
View Related
Nov 1, 2013
I wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
Â
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
Â
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
View 2 Replies
View Related
Jul 9, 2013
All my settings are correct. I have correct paper selected (borderless). All sliders are at ZERO. Aspect ratio of picture is correct. Correct ICC profiles are installed. THIS IS CLEARLY A LIGHTROOM ISSUE! I can print perfectly using Canon's supplied software.
Macbook Pro (new)
Canon Pro-100 Printer
View 4 Replies
View Related
Feb 28, 2013
I have been trying to make business cards in Lightroom 4. Everything works fine except no matter how I set things up my 2 X 3.5 inch photos print at 3 11/16 X 2 1/8 inch. My printer is set to print borderless 4 X 6. My settings under Custom Package are as in the screenshot below.
View 1 Replies
View Related
Nov 26, 2013
I have 4 x 6 papers with rounded corners and I want to print on these papers borderlessly.
I choose 4 x 6 paper size in Lr and borderless option clicked in the Epson driver.
In this case, some drops of inks can not fall on the paper (at the rounded corners).
Is this case harmful for the printer?
If so, how should I print borderlessly from Lr on papers with rounded corners?
View 1 Replies
View Related
Jan 19, 2013
Upgraded OS from W7 (64bit) to W8.
Â
Using Canon Pro 9000 Mk2 printer, unable to select and print borderless prints of any size.
Â
However, using Elements 11, there is no problem which suggest the problem is confined to LR4.3.
Â
Have uninstalled and reinstalled the driver w/o success.
View 4 Replies
View Related
Sep 14, 2012
I used to get borderless prints in elements 3 but I can't in elements 10. I have the same printer and computer. Why?
View 2 Replies
View Related
Jan 13, 2014
When using my HP 7020e photosmart printer and Adobe photoshop elements 11, I get a very small white border on the prints. I have set for borderless printing. Adobe says the print size is 4.2 x 6.18 instead of 4 x 6.
View 2 Replies
View Related
Sep 10, 2012
I am unable to print from Photoshop CS6 to two different Epson printers - an Epson 9800 and an Epson 7880. I have tried to print from three different computers (OS 10.6 and OS 10.8) and have also tried three different USB cables. Each time I get the same results - the computer acts like it sends the data to the printer, but the printer never prints anything. I am not getting any error messages. I am attepting to print a 3960x2160, 720 DPI RGB TIF image. I tried printing from Preview as a test but that didn't work either.
Â
I have tried reinstalling drivers, turning the computer and printers on and off, cleared my caches and repaired permissions, but so far no luck.However there is ONE situation in which I am able to print - if I save the image as PDF and print it from from Acrobat, specifically with "Acrobat Color Management" selected, it WILL print. If I try to print from Acrobat with "Printer Manages Colors" selected, it will not print.
View 3 Replies
View Related
Jun 28, 2013
My new MacBookPro using Photoshop CS4 prints just fine to my Epson 2400 and 1900 however when using my new 4900 I click "print" and the printer icon bounces once in the dock and then disappears. The printer then gyrates and makes noise but puts out no image.Â
I can print documents and images from Preview and Pages and the web on the 4900 so I know the printer can print. I have reloaded CS4 several times from my disc and the Epson driver several times to no avail.
The Epson tech guy says what appears obvious, that the printer is working fine but that PS cannot communicate with the 4900.
View 3 Replies
View Related
Oct 31, 2013
When I try to print Photoshop shuts down. I have the newest driver from Epson and their customer support said to check with Adobe.
View 1 Replies
View Related
Jan 21, 2013
It does, however, print happily to a USB Epson 2200 plugged into the same machine. All other apps on this Mountain Lion Mac Mini, including CS4 Illustrator, print fine to the 4900. I have tried both a USB and a network connection to the printer with the same result. There is *some* small output to the printer (just a flash on the print monitor), but no output results.Â
View 2 Replies
View Related
Oct 30, 2012
Photoshop will not print on my epson 837 but will print on other printers and other apps can print on this 837.
Â
I do get an error message that I should reset the Printer's color management in the Printer's dialog box, but when I click Print to get to the dialog, it just disappears.
Â
PS - I have uninstalled and reinstalled the printer on the mac; then again after downloading a fresh driver from epson...though this is unlikely to be the problem since I have now confirmed that every other app prints just fine.
Â
I deleted all of my paper presets and tried making new ones... I keep getting this error msg and don't know what it means or how to correct the color sync:
Â
ColorSync color matching may produce different results than printer color management. Either Photoshop color management or printer color management is recommended.
View 1 Replies
View Related
Dec 17, 2012
On my MacBook OSX 10. 8.2Â I can't print with my Epson printer. Yet I can print with Photoshop CS 5.
View 3 Replies
View Related
May 13, 2008
I have a problem with CS3... When I want to print a 100x300cm or longer banner with Epson 9800 the print preview of Epson doesn't show the complete document. A1 to B0 jobs has no problem. At the print preview 1/3 or 1/4 of the banner is blank...With CS2 there is no problem.
I install the updates for CS3 but problem is still on.
I sellected the PDF printer as default.(I read this in a forum)
I have 2 9800, 1 9880 and 5 4800 on a network...
With CS3: If I save the banner in PSD, PDF, JPEG, TIF format doesn't matter. Same problem.
I try the job on Corel X3 as JPEG it doesn't read anything on some PC's, the print preview is blank. Some PC's read the document with Corel X3.
I think I have to go back to CS2.......
View 6 Replies
View Related
Jan 19, 2012
I am trying to print a 22"x40" print on canvas using CS5 with the Epson 7600. The image prints fine until about 2/3 of the way thru and then it just stops. This has happened 3Xs now.Â
Â
On first attempt the resolution was set at 300dpi and the file was about 400+mb.I've flattened the image and reduced the resolution to 200 making the file about 120mb. Same problem!
Â
I printed the same image (at the larger size) on paper without any problem.
View 2 Replies
View Related
Jul 14, 2012
I have an Epson 1400, and it was working fine this morning. I usually go to Print Settings to select my glossy paper. But just now, when I went to print, and tried to click the Print settings... button, nothing happens. I have tried using Software Update and installed the latest Epson Printer Software, and tested several other applications, and the printer is connected and working fine in those.
View 7 Replies
View Related
May 30, 2009
I am using the Adobe Master Collection CS4, and use an Epson RX650 printer, but for the life of me I cannot get Photoshop to print what is on the screen.The prints are dark, and no where near the ones on the screen. I am using genuine Epson Ink, and Premium glossy paper, so as to remove this issue, is this a case of my screen needing to be calibrated? I have considered buying the Spyde Studio calibrator to ensure that this is correct, (do I need to?) and I have read as much as I can about setting up Adobe to manage the print settings and colours, but still no luck. My current settings are as follows In Adobe Bridge, my creative suit color settings are set to Europe General Purpose 2The in Adobe Photoshop (version 11.0.1) I am selecting under colour management, Document Adoby RGB (1998), Photoshop handles colours, Printer profile is Epson sRGB Colour Space, Rendering intent is Relative Colourimetric, and I have ticked the following boxs, Blackpoint compensation, Match print colours, Gamut warning and Show paper white.
View 15 Replies
View Related
Jan 1, 2013
windows7  Epson 2880 printer I can print in Lightroom with no problem. CS6 was printing okay. Now when I try printing it says proceeding , but nothing happens. Cs6 does not crash. Just won 't print. My printer dialog box says error printing then recover file , but when i try again nothing. everything else seems okay. I restarted CS6 and rebooted computer , still no printing. What am Idoing wrong. Is does CS6 haveto be re instalked ?
View 2 Replies
View Related
