I have been trying to make business cards in Lightroom 4. Everything works fine except no matter how I set things up my 2 X 3.5 inch photos print at 3 11/16 X 2 1/8 inch. My printer is set to print borderless 4 X 6. My settings under Custom Package are as in the screenshot below.
View 1 RepliesI wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
Â
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
Â
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
All my settings are correct. I have correct paper selected (borderless). All sliders are at ZERO. Aspect ratio of picture is correct. Correct ICC profiles are installed. THIS IS CLEARLY A LIGHTROOM ISSUE! I can print perfectly using Canon's supplied software.
Macbook Pro (new)
Canon Pro-100 Printer
I have 4 x 6 papers with rounded corners and I want to print on these papers borderlessly.
I choose 4 x 6 paper size in Lr and borderless option clicked in the Epson driver.
In this case, some drops of inks can not fall on the paper (at the rounded corners).
Is this case harmful for the printer?
If so, how should I print borderlessly from Lr on papers with rounded corners?
Upgraded OS from W7 (64bit) to W8.
Â
Using Canon Pro 9000 Mk2 printer, unable to select and print borderless prints of any size.
Â
However, using Elements 11, there is no problem which suggest the problem is confined to LR4.3.
Â
Have uninstalled and reinstalled the driver w/o success.
How to print A3 size borderless portrait using Epson R1500W. I've got this printer 2 days ago and still can not figure aout how to do it. I've got few mm blank in either side of length wise.
View 3 Replies View RelatedI just downloaded and installed LR5 successfully to my iMac (2012) running OS 10.8.4. Everything seems to be working fine (LR4 catalog converted, Import works fine, etc.) EXCEPT printing to the same HP printer I use with LR4. When I press the Print button after setting things up, the bar on the upper left corner proceeds quickly, the message Task Completed appears (and goes away quickly), BUT...nothing happens on the printer. It just does not get the print job sent to it. The iMac reports that the printer is Idle, there is no record of a job being received.
Â
I checked the printer, it works fine. I can print from Photoshop without a gltch. So, comunication between the computer and the printer does not seem to be the issue.
I have PSE 9. HP 5514 printer. I can print photos borderless through Windows, but not through PSE. In PSE, I have unchecked the box for Border, have checked the Crop to Fit box and Center Image box (and every possible combination thereof). My photo has been sized to 4"x6" in PSE, and I have checked all boxes in the print dialogue for 4"x6". I get a border no matter what I do.Â
View 1 Replies View RelatedHow do i print borderless pictures using elements 10
View 3 Replies View RelatedUnable to print from Lightroom to my Canon Pro9000 Mark II Printer, I get an error code 1062.
View 1 Replies View RelatedWhat do I have to do to print borderless photos on a LaserJet Pro 200 M251 nw printer?
View 2 Replies View RelatedI've been trying to print full bleed images to 3880 epson printer from LR 4.1 and for some reason won't let me make 8.5 x11 borderless prints to printer. both the left and right side of image has white borders and top and bottom has none.
both page grids sides go as low as 1 and cell size reads properly of 11.00in x 8.50in. but when you look at image in print mode in LR- it shows white borders on both sides of picture.
been on phone for 3 hrs with adobe and 30 min with epson tech to no avail?
unable to select "printer manages colors" in the print settings, manage colors dialog. The options are grayed out and the default is "color sync". This started yesterday with LR4 so I upgraded to LR5 and it is the same.
View 2 Replies View RelatedWhen trying to print borderless the menu reverts to the smaller size. ie when selecting 5x7 it reverts to 4x6. Ditto 8x10 and 11x14 etc. The paper size stays the same, just the print size reverts and the desired size disappears. I contacted Epson twice and both times I was told it is a software issue, not the printer. The same thing happens in Lightroom, but in WEindows Gallery Live the printer works correctly which indicates the driver and printer are working correctly. I am using Windows 7 and had Elements 9, but Elements 10 came bundled with the printer so I upgraded to 10, no improvement.
View 5 Replies View RelatedI have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?
Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.
Publish does saving in DWF, PDF... But does not print in the printer.
I am printing to Epson R3000 with LR managing the colour management. I can't get the borders to zero in the print module and have a small boarder of a few millimetres on a one cell print.
View 3 Replies View RelatedOK. So how do I print a 4x6 borderless print on my new 7510 Photosmart? My only options seem to be a 4x6 tab print. What gives?
View 7 Replies View RelatedI've been experiencing a problem when printing borderless on with LR4. Although I'm using borderless print settings, all margins are 0 and cell size is 4x6 or 8x10 or whatever it needs to be, the bottom edge of all photos has a 1-2mm line of unprinted paper.
Â
This is also visible on the print preview of LR4, as you can see on the bottom of the attached image.
When trying for borderless A4 prints there is always a small border on the top and right hand edge of the resulting print.
This only happens when using LR.I am printing to a Kodak c310 printer.
I am designing a business card that has lime green as a main color, and I am finding it impossible to find a commercial printer that will print in RGB! I completely understand the difference between the 2 color pallets I just don't understand why I can not find one printer that will print RGB! So does that mean any business card I ever do can never have bright colors?
View 10 Replies View RelatedJust bought a new iMac with OS X Mountain Lion (10.8.2). Installed my HP PhotoSmart C4180 printer and its drivers, it prints fine from Adobe Acrobat and scans just fine. I went to print from Photoshop CS5, and once I decided my settings and hit "Print" the program crashed and has done so consistently. I've provided the crash report below.
Â
Process:Â Â Â Â Â Â Â Â Adobe Photoshop CS5 [13103]
Path:Â Â Â Â Â Â Â Â Â Â Â /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5
[Code]....
On my MacBook OSX 10. 8.2Â I can't print with my Epson printer. Yet I can print with Photoshop CS 5.
View 3 Replies View RelatedI have 17 printers installed. all but 2 use match orientation. The Canon W6400PG and the MP 5500 use printer orientation. Is there a way to change those 2 to match all the others that work just fine? The default is the HP LaserJet 1200 Series PCL 5.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I'm looking for a way to print CDs (to Canon ip8500 and ip4300 printers) directly from Photoshop. I'm on x64 where Canon's CD Lable-print won't run, besides which I'd much prefer to print from Photoshop anyway. Is there a plug-in, a work round, a clever trick?
View 6 Replies View RelatedI am trying to print a psd file via CS4 and I am receiving the following error message: Before you can perform printer-relate tasks such as page setup or printing a document, you need to install a printer I DO have a printer installed and can in fact print out a different psd file.....and print something via Word. I tried to check my page setup for this document but I can't do that either. Any ideas of what might be causing this problem?? I even uninstalled and reinstalled my printer.....and rebooted too. If it matters, I am trying to print to a Canon MP980 printer via a wireless setup. I am running under Vista.
View 1 Replies View RelatedGimp is 2.6.11 (with the print bug fixed!?)
Printer is Kodak ESP5200 All in One, operating in wireless mode.
Op sys is Windows 7.
Symptom: any print request from GIMP results in the printer stuck at 0% spooled.
Going to other (native) Windoze applications for printing really sucks. The built in print function scales to whatever it thinks convenient. Windows Paint also does ambiguous scaling. All I want is an exact scale print ... and GIMP used to do this very well.
Clarification added: GIMP handles dimensions perfectly, and all I want is for it to print. I have no interest / desire to push the image in to some other application just to get it printed.
In Photoshop Elements 8, I select my printer, HP C410a, for printing. Elements decides to print to FAX. How to print to my printer?
View 4 Replies View Relatedcan i print from adobe illustrator cs 6 to a non postscript printer?
View 6 Replies View RelatedA printer profile working perfectly in CS5 does even not appear in CS6. How do I fix this? (Windows 7 64 bit for CS5 and CS6).
View 10 Replies View RelatedI have an Epson 1400, and it was working fine this morning. I usually go to Print Settings to select my glossy paper. But just now, when I went to print, and tried to click the Print settings... button, nothing happens. I have tried using Software Update and installed the latest Epson Printer Software, and tested several other applications, and the printer is connected and working fine in those.
View 7 Replies View RelatedPrint setting on a printer dialog is not responding. Now I have a new printer driver (Epsom stylus Photo R800)I cannot set paper size.This is a recurring problem. I have been trying to relaunch app holding control+ option+shift without effect.
View 49 Replies View Related