Lightroom :: Cannot Print From 5 To HP Printer

Jun 11, 2013

I just downloaded and installed LR5 successfully to my iMac (2012) running OS 10.8.4. Everything seems to be working fine (LR4 catalog converted, Import works fine, etc.) EXCEPT printing to the same HP printer I use with LR4. When I press the Print button after setting things up, the bar on the upper left corner proceeds quickly, the message Task Completed appears (and goes away quickly), BUT...nothing happens on the printer. It just does not get the print job sent to it. The iMac reports that the printer is Idle, there is no record of a job being received.
 
I checked the printer, it works fine. I can print from Photoshop without a gltch. So, comunication between the computer and the printer does not seem to be the issue.

View 3 Replies


ADVERTISEMENT

Lightroom :: Printer Is Set To Print Borderless 4 X 6

Feb 28, 2013

I have been trying to make business cards in Lightroom 4.  Everything works fine except no matter how I set things up my 2 X 3.5 inch photos print at 3 11/16 X 2 1/8 inch.  My printer is set to print borderless 4 X 6.  My settings under Custom Package are as in the screenshot below.

View 1 Replies View Related

Lightroom :: Unable To Print To Canon Pro9000 Mark II Printer

Mar 8, 2013

Unable to print from Lightroom to my Canon Pro9000 Mark II Printer, I get an error code 1062.

View 1 Replies View Related

Lightroom :: How To Print Full Bleed Images To 3880 Epson Printer From 4.1

Oct 1, 2012

I've been trying to print full bleed images to 3880 epson printer from LR 4.1 and for some reason won't let me make 8.5 x11 borderless prints to printer. both the left and right side of image has white borders and top and bottom has none.

both page grids sides go as low as 1 and cell size reads properly of 11.00in x 8.50in. but when you look at image in print mode in LR- it shows white borders on both sides of picture.

been on phone for 3 hrs with adobe and 30 min with epson tech to no avail?

View 13 Replies View Related

Lightroom :: Unable To Select Printer Manages Colors In Print Settings

Jul 21, 2013

unable to select "printer manages colors" in the print settings, manage colors dialog. The options are grayed out and the default is "color sync". This started yesterday with LR4 so I upgraded to LR5 and it is the same.

View 2 Replies View Related

AutoCAD Print / Plot :: How To Print Multiple Layout Pages In A Printer

Oct 14, 2012

I have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?

Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.

Publish does saving in DWF, PDF... But does not print in the printer.

View 3 Replies View Related

Photoshop :: Cannot Find A Printer That Will Print RGB

Sep 1, 2012

I am designing a business card that has lime green as a main color, and I am finding it impossible to find a commercial printer that will print in RGB! I completely understand the difference between the 2 color pallets I just don't understand why I can not find one printer that will print RGB! So does that mean any business card I ever do can never have bright colors?

View 10 Replies View Related

Photoshop :: Mac OS X 10.8.2 CS5 Crashes When Print With HP Printer?

Jan 24, 2013

Just bought a new iMac with OS X Mountain Lion (10.8.2). Installed my HP PhotoSmart C4180 printer and its drivers, it prints fine from Adobe Acrobat and scans just fine. I went to print from Photoshop CS5, and once I decided my settings and hit "Print" the program crashed and has done so consistently. I've provided the crash report below.
 
Process:         Adobe Photoshop CS5 [13103]
Path:            /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5

[Code]....

View 1 Replies View Related

Photoshop :: CS6 - Can't Print With Epson Printer?

Dec 17, 2012

On my MacBook OSX 10. 8.2  I can't print with my Epson printer. Yet I can print with Photoshop CS 5.

View 3 Replies View Related

CorelDRAW X6 :: Printer Orientation On Print

May 23, 2012

I have 17 printers installed. all but 2 use match orientation. The Canon W6400PG and the MP 5500 use printer orientation. Is there a way to change those 2 to match all the others that work just fine? The default is the HP LaserJet 1200 Series PCL 5.

Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6

View 8 Replies View Related

Photoshop :: How To Print To Canon CD Printer...

Mar 27, 2008

I'm looking for a way to print CDs (to Canon ip8500 and ip4300 printers) directly from Photoshop. I'm on x64 where Canon's CD Lable-print won't run, besides which I'd much prefer to print from Photoshop anyway. Is there a plug-in, a work round, a clever trick?

View 6 Replies View Related

Photoshop :: Unable To Print -- Printer Not...

Jun 7, 2009

I am trying to print a psd file via CS4 and I am receiving the following error message: Before you can perform printer-relate tasks such as page setup or printing a document, you need to install a printer I DO have a printer installed and can in fact print out a different psd file.....and print something via Word. I tried to check my page setup for this document but I can't do that either. Any ideas of what might be causing this problem??  I even uninstalled and reinstalled my printer.....and rebooted too.  If it matters, I am trying to print to a Canon MP980 printer via a wireless setup.  I am running under Vista. 

View 1 Replies View Related

GIMP :: Can't Print To Kodak AIO ESP Printer

Jun 10, 2011

Gimp is 2.6.11 (with the print bug fixed!?)
Printer is Kodak ESP5200 All in One, operating in wireless mode.
Op sys is Windows 7.

Symptom: any print request from GIMP results in the printer stuck at 0% spooled.

Going to other (native) Windoze applications for printing really sucks. The built in print function scales to whatever it thinks convenient. Windows Paint also does ambiguous scaling. All I want is an exact scale print ... and GIMP used to do this very well.

Clarification added: GIMP handles dimensions perfectly, and all I want is for it to print. I have no interest / desire to push the image in to some other application just to get it printed.

View 4 Replies View Related

Photoshop Elements :: Print Goes To FAX Instead Of Printer?

May 25, 2013

In Photoshop Elements 8, I select my printer, HP C410a, for printing. Elements decides to print to FAX. How to print to my printer?

View 4 Replies View Related

Illustrator :: Print To Non Postscript Printer?

Dec 5, 2013

can i print from adobe illustrator cs 6 to a non postscript printer?

View 6 Replies View Related

Photoshop :: Printer Profile In Print Settings Of CS6

Apr 28, 2013

A printer profile working perfectly in CS5 does even not appear in CS6. How do I fix this? (Windows 7 64 bit for CS5 and CS6).

View 10 Replies View Related

Photoshop :: No Print Settings For Epson Printer

Jul 14, 2012

I have an Epson 1400, and it was working fine this morning. I usually go to Print Settings to select my glossy paper. But just now, when I went to print, and tried to click the Print settings... button, nothing happens. I have tried using Software Update and installed the latest Epson Printer Software, and tested several other applications, and the printer is connected and working fine in those.

View 7 Replies View Related

Photoshop :: Print Setting On a Printer Dialog Is Not Responding

Oct 14, 2012

Print setting on  a printer dialog is not responding. Now I  have a new printer driver (Epsom stylus Photo R800)I cannot set paper size.This is a recurring problem. I have been trying to relaunch app holding control+ option+shift without effect.

View 49 Replies View Related

Photoshop :: CS6 does Not Print - Epson 2880 Printer

Jan 1, 2013

windows7   Epson 2880 printer  I can print in Lightroom with no problem.  CS6 was printing okay.  Now when I try printing it says proceeding , but nothing happens. Cs6 does not crash.  Just won 't print.  My printer dialog box says error printing then recover file , but when i try again nothing.  everything else seems okay.  I restarted CS6 and rebooted computer , still no printing. What am Idoing wrong.  Is does CS6 haveto be re instalked ?

View 2 Replies View Related

Photoshop :: Printer Profiles Not Showing In Print Dialog?

Dec 29, 2012

I cannot seem to see the custom Printer Profiles I have for certain papersin the Print Dialog.I have added the Print Profiles to Library > Application Support > Adobe > Color > Profiles (and also in Recommended)
 
But in the Print Dialog under Colour Management > Photoshop Handles Colour > Print Profile - they are not showing. I have done things like restarting Photoshop and converting the image to CMYK from RGB.
 
I can see the profiles in the Proofing menu and am able to select them.without using the profiles my colour management is completely off kilter.Also, can I confirm that I am putting the printer profiles in the correct folder?

View 4 Replies View Related

Photoshop :: Printer Profiles Not Recognized In CS6 Print Dialogue?

Oct 15, 2012

Note that the Illustrator, Indesign and Acrobat print dialogues see all my (custom) printer profiles.
 
Even Photoshop sees them in the Apply Profile and Convert to Profile dialogues: just not when trying to print.

View 17 Replies View Related

AutoCAD Print / Plot :: Printer Function Hangs Up?

Apr 2, 2012

When I try printing, autocad gives me the following message (see attached pic).  I deleted that driver out of system preferences.  Yet it sitll keeps looking for it.   I get the spinning rainbow for about 5 minutes, the  the print dialogue eventaully comes up.  I can print, but that takes over 5 minutes as well.   Seems like autocad gets stuck in a loop looking for a driver or something.   How do I fix this.  Printing a single pages takes me about 10 minutes.    Do anything within the page setup manager results in a spinning icon for a few minutes as well.

View 9 Replies View Related

AutoCAD Print / Plot :: New Large Format Printer

Aug 3, 2012

My company will be getting a new large format printer to replace the current one we have. We don't have room enough to have both running at the same time so I'm imagining one-day down then viola, we have a new printer.

How I can prepare for this as far as creating the necessary Plot Styles, pc3, pmp...files? Because i have many items on my to-do list, this could take a day or two with all the testing and i can't image the uproar from our CADers about going without a plotter for two or three days.

View 1 Replies View Related

AutoCAD Print / Plot :: Printing To PDF To Printer Transparency

Dec 18, 2013

When I print to .pdf for A1 and plot, no worries, all lineweights print solid and perfectly. However, when I print to .pdf for A3 (scaling lineweights), whilst all the lineweights appear solid on the screen, when I plot the layers that are set to transparency are faded/rough/broken on paper.

Ticking the plot transparency box doesn't work and it happens to my printer at home and at work. I haven't used transparent layers before and have adopted this drawing created through someone else.

View 1 Replies View Related

AutoCAD Inventor :: VBA Printer Options Not Affecting Print

Apr 2, 2013

When set it to use 11x17 paper it will print 8.5x11 which is the default size for the printer. So if I change the printer options to default to 11x17 it will print with 11x17. Changing the color between color, greyscale, and blackandwhite don't affect the prints either.

Also is there a way to detect the default printer since I noticed when I "printed" a pdf manually and then tried this script it used the pdf printer and not the default printer, which I would always want to use.
 
Public Sub Single_Print_11x17() Dim oPrintMgr As PrintManager Set oPrintMgr = ThisApplication.ActiveDocument.PrintManager If MsgBox("Using default printer """ & oPrintMgr.printer & """ with 11x17 paper. Do you want to continue?", vbYesNo + vbQuestion) = vbNo Then Exit Sub Print_doc printer:=oPrintMgr.printer, paper:=kPaperSize11x17, black_white:=TrueEnd Sub

 If you notice that i'm not using two of the arguements in the function that are passed, that's because they don't appear to affect anything so I just left some of it hard coded. When/if I can get the different options working I'll start using the arguements more since I have plans.
 
Function Print_doc(ByVal printer As String, ByVal paper As String, ByVal black_white As Boolean) If ThisApplication.ActiveDocument.DocumentType <> kDrawingDocumentObject Then Exit Function Dim oDrgDoc As DrawingDocument Set oDrgDoc = ThisApplication.ActiveDocument Dim oDrgPrintMgr As DrawingPrintManager Set oDrgPrintMgr = oDrgDoc.PrintManager 'choose printer works oDrgPrintMgr.printer = printer 'choose sheets works oDrgPrintMgr.PrintRange = kPrintAllSheets 'choose size doesn't work oDrgPrintMgr.PaperSize = kPaperSize11x17 'choose scale works oDrgPrintMgr.ScaleMode = kPrintBestFitScale 'color/black & white don't work oDrgPrintMgr.ColorMode = kPrintGrayScale oDrgPrintMgr.AllColorsAsBlack = black_white oDrgPrintMgr.SubmitPrintEnd Function
 
I'd love to get all these options working since I want to be able to select size and color options when using my print scripts.

View 9 Replies View Related

AutoCAD Inventor :: Getting Files To Print To Scale On 3D Printer?

Mar 21, 2013

I have a Makerbot Replicator 3d printer for my class. I am having issues when I save my drawing as an stl file bring it up in the Makerware software it decreases the size and I can't get things to scale. I have been in contact with Makerbot for several months and their response is now: "We actually may have had a bit of a breakthrough! Apparently there's something off about the way that Inventor exports files to .stl, and there may be a bug in our software when scaling. Whenever exporting to .stl, especially in metric apparently, Inventor makes the object 10% of the size. To correct for this, can you try scaling your model by 1000%, then exporting to .stl and bringing it into MakerWare? Send me a copy of the .stl either way, and let me know how it goes!" and "The issue is not something we can fix because it's not an issue in MakerWare.

View 3 Replies View Related

AutoCAD Print / Plot :: Setting Up Printer Format

Oct 2, 2012

I have to set up my drawing on the model page so that I can save it as a PDF and then transfer it into adobe illustrator. My scale is 1:1, and when I put it on the model page I'm doing a 1/8" : 1' scale. It should fit on the page no problem, its only a 9" model plan on 1/4 scale, so it should be 4.5" on the page. However, it's too big for the page.

View 1 Replies View Related

AutoCad 2D :: How To Print Out 10 Title Block At A Time On To Printer

Oct 23, 2013

May i know how to print out many Title Block at a Time. I will like to Print out my Complete CAD Drawing, but I have all together in one Print space, so can some let know how to print them all at once with out printing them one by one.

View 8 Replies View Related

Illustrator :: Using CS5 Windows Won't Print All Graphics Of File Even On PS Printer

Aug 27, 2013

Using CS5 windows won't print all the graphics of the file, even to a PS printer. Some of the graphics don't print at all and some print in a reverse color.

View 5 Replies View Related

Photoshop Elements :: 10 - Can't Print To Epson R3000 Printer

Jan 24, 2013

I can't print to my Epson R3000 printer from the Photoshop Elements 10 I have installed on a Mac OS 1.7.5

View 2 Replies View Related

Photoshop :: Since Recent Upgrade To Win 8 From 7 HP Printer Will Not Accurately Print From Photosmart 7.0.1

Nov 30, 2012

Since recent upgrade to win 8 from 7 HP printer will not accurately print from Photosmart 7.0.1

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved