May i know how to print out many Title Block at a Time. I will like to Print out my Complete CAD Drawing, but I have all together in one Print space, so can some let know how to print them all at once with out printing them one by one.
View 8 Replies
I'm having an issue with Autocad LT 2010 where when I xref in my title block which has our company logo in color, the logo will only print in black and white. If i open just the title block and print it, it will then print in color. I only seem to have this problem when the title block is xref'd in. I downloaded the 2012 demo version of AutoCadLT and it prints just fine?This has just started happening when my computer was upgraded to Windows 7 64 bit.
View 8 Replies View Relatedour office is having an issue with certain drawings when we create a plot file to be printed by an outside printing company. Other drawings which are set up to plot in the exact same way do not seem to have this problem.
The issue is that everything within the viewport plots as shown in the print preview, however; some of the paperspace elements on our title block do not print. OLE objects, additional viewports for legends, and brackets that are in paperspace are not printing.
I’m wondering if there is a way to fill the values of all parameters of a title block for ALL sheets at a time. Are we supposed to fill out these parameters for each single sheet manually despite that fact that they are similar?Surely, I’m not taking here about the sort of information that differs from sheet to another like the “sheet name”
Why ALL the parameters of the title block are not shown in the properties dialogue box?
How to change the order of the sheets? Is there a way to move the sheet up and down?
Is there an automated way to re-numbering the sheets based on a given start value say A001?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Many times when I receive a drawing from an architect, when I go into the layout tab the titleblock info/XREF doesn't line up with the page layout. I would assume it lined up when the architect sent it to me in his software. For years the solution I use is to XREF the architects PDF in the layout and then go to print and change the Print Offset till it looked right in the print preview. Then I would apply it to the layout. I would then take the offsets and apply it to every sheet. This is a very time consuming process and was wondering if there is a better way to make this work and still keep the scales. I was also wondering if there was a way to move and align the layout on the fly in the paperspace.
View 3 Replies View RelatedI have 4 layouts all from the same drawing that I need desperately to print now. But for some reason only the border and Title block will print for me. What have I done to cause this? And how can I rectify it? I need to print these tonight
View 3 Replies View RelatedUsed to plot, but now it doesn't. The VG title block is checked.
View 1 Replies View Relatedtrying to figure out a way to use imposition to merge images from multiple pages on to a single page while maintaining a constant element (title block) on the page.
1. Creating a drawing of a sign for client proof/approval
2. Use print merge to create duplicates of that sign on separate pages with the varying messages
3. Use imposition to cluster several signs from the separate pages I now have on to a single page
4. (Problem Step) Figure out how to maintain a title block on my page of now clustered signs
I'm going to attempt to post an image of the page style I want with the title block. What I'd like is what is shown here only with some way to automate it so I can have multiple versions of that sign show up on this same page.
The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
I have a title block inside my drawing and i want to link my title on the title of the file itself, so that if the title of the file was change, it will be change also inside the drawing.
View 4 Replies View RelatedI have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?
Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.
Publish does saving in DWF, PDF... But does not print in the printer.
We have a title block and border which is used in MS. If this is referenced using AMTITLE then it acts as expected. We issue these to some external people to create our drawings but they have been using CTRL-C and V to place them in a new drawing. ACAD does now not see them as a Title block or border but as blocks. We have a process to bring DWG's into SAP and this will check for a title block and border.
The issue is we need to fix these drawings and currently this means removing the borders and title blocks and placing new ones then adding all the attributes again. Is there a way to convert the blocks back to how they should be?
AutoCADM 2011 SP2
XP 32-Bit SP3
How to convert existing 2d autocad title block into Revit title block template?
View 7 Replies View RelatedAutocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
How do you insert title block, so your design is in the middle of block?
View 9 Replies View RelatedI know this isnt really a CAD question but I bought a hp designjet 510 about 6 months ago. It was working great and cutting everything. Then I had a paper jamb and ever since then it doesn't cut every time. Sometimes it cuts four pages in row and then sometimes it will group 2 together.
View 5 Replies View RelatedIs it possible to create a block to insert on our title block that will populate itself with a list of drawings and names?
I know this is possible through the use of LISP and the Sheet Set Manager, but could this be done through a combination of attributes and fields (we want the same functionality in LT).
I'm editing a title block using the Block Editor. Unfortunatelly after closing the block editor the linse & Polylines reflect the changes apported in nodel space, but the text did not mouve?
View 2 Replies View RelatedI'm trying to chnage the text of the sheet number and total sheet number attributes for each layout in my drawing. I have code that adds and deletes the specified pages, now I need to edit the attributes to reflect the correct page and correct total amount of pages. Here is my code, based on my old VBA version.
I know there is a problem with the line:
For Each item In myBTR.ObjectId
I've used a number of websites and books, but I would really like to find something that teaches about block tables, block table references, block table IDs so I can get a better understanding of breaking stuff down to get the info I need.
Public Sub updatePageNumbers()
Dim myDWG As Autodesk.AutoCAD.ApplicationServices.Document
Dim myDB As Autodesk.AutoCAD.DatabaseServices.Database
Dim myTransManForPageNumbers As Autodesk.AutoCAD.DatabaseServices.TransactionManager
Dim myTransForPageNumbers As Transaction
[Code]....
When I try printing, autocad gives me the following message (see attached pic). I deleted that driver out of system preferences. Yet it sitll keeps looking for it. I get the spinning rainbow for about 5 minutes, the the print dialogue eventaully comes up. I can print, but that takes over 5 minutes as well. Seems like autocad gets stuck in a loop looking for a driver or something. How do I fix this. Printing a single pages takes me about 10 minutes. Do anything within the page setup manager results in a spinning icon for a few minutes as well.
View 9 Replies View RelatedMy company will be getting a new large format printer to replace the current one we have. We don't have room enough to have both running at the same time so I'm imagining one-day down then viola, we have a new printer.
How I can prepare for this as far as creating the necessary Plot Styles, pc3, pmp...files? Because i have many items on my to-do list, this could take a day or two with all the testing and i can't image the uproar from our CADers about going without a plotter for two or three days.
When I print to .pdf for A1 and plot, no worries, all lineweights print solid and perfectly. However, when I print to .pdf for A3 (scaling lineweights), whilst all the lineweights appear solid on the screen, when I plot the layers that are set to transparency are faded/rough/broken on paper.
Ticking the plot transparency box doesn't work and it happens to my printer at home and at work. I haven't used transparent layers before and have adopted this drawing created through someone else.
When set it to use 11x17 paper it will print 8.5x11 which is the default size for the printer. So if I change the printer options to default to 11x17 it will print with 11x17. Changing the color between color, greyscale, and blackandwhite don't affect the prints either.
Also is there a way to detect the default printer since I noticed when I "printed" a pdf manually and then tried this script it used the pdf printer and not the default printer, which I would always want to use.
Public Sub Single_Print_11x17() Dim oPrintMgr As PrintManager Set oPrintMgr = ThisApplication.ActiveDocument.PrintManager If MsgBox("Using default printer """ & oPrintMgr.printer & """ with 11x17 paper. Do you want to continue?", vbYesNo + vbQuestion) = vbNo Then Exit Sub Print_doc printer:=oPrintMgr.printer, paper:=kPaperSize11x17, black_white:=TrueEnd Sub
If you notice that i'm not using two of the arguements in the function that are passed, that's because they don't appear to affect anything so I just left some of it hard coded. When/if I can get the different options working I'll start using the arguements more since I have plans.
Function Print_doc(ByVal printer As String, ByVal paper As String, ByVal black_white As Boolean) If ThisApplication.ActiveDocument.DocumentType <> kDrawingDocumentObject Then Exit Function Dim oDrgDoc As DrawingDocument Set oDrgDoc = ThisApplication.ActiveDocument Dim oDrgPrintMgr As DrawingPrintManager Set oDrgPrintMgr = oDrgDoc.PrintManager 'choose printer works oDrgPrintMgr.printer = printer 'choose sheets works oDrgPrintMgr.PrintRange = kPrintAllSheets 'choose size doesn't work oDrgPrintMgr.PaperSize = kPaperSize11x17 'choose scale works oDrgPrintMgr.ScaleMode = kPrintBestFitScale 'color/black & white don't work oDrgPrintMgr.ColorMode = kPrintGrayScale oDrgPrintMgr.AllColorsAsBlack = black_white oDrgPrintMgr.SubmitPrintEnd Function
I'd love to get all these options working since I want to be able to select size and color options when using my print scripts.
I have a Makerbot Replicator 3d printer for my class. I am having issues when I save my drawing as an stl file bring it up in the Makerware software it decreases the size and I can't get things to scale. I have been in contact with Makerbot for several months and their response is now: "We actually may have had a bit of a breakthrough! Apparently there's something off about the way that Inventor exports files to .stl, and there may be a bug in our software when scaling. Whenever exporting to .stl, especially in metric apparently, Inventor makes the object 10% of the size. To correct for this, can you try scaling your model by 1000%, then exporting to .stl and bringing it into MakerWare? Send me a copy of the .stl either way, and let me know how it goes!" and "The issue is not something we can fix because it's not an issue in MakerWare.
View 3 Replies View RelatedI have to set up my drawing on the model page so that I can save it as a PDF and then transfer it into adobe illustrator. My scale is 1:1, and when I put it on the model page I'm doing a 1/8" : 1' scale. It should fit on the page no problem, its only a 9" model plan on 1/4 scale, so it should be 4.5" on the page. However, it's too big for the page.
View 1 Replies View RelatedI have a HP DesignJet 110 nr connected as a network printer. I have all the drivers updated including the network card. I have unistalled and reinstalled all the drivers and software. I have also replaced the ink cart. too. When I print in AutoCAD 2011 it acts like it is printing stuff, but it goes throught the whole process and nothing prints. I just started creating PDFs and sending them to the printer, but thought I would give it a new shot.
View 5 Replies View RelatedI have Windows 7 workstation 64 bit.
I am trying to configure a networked printer using a PS driver. I am not able to print floor plans full page. It is only printing 1/4 of the plans.
configuring the device? The device is a Canon IRC5185.
I do have an HP print locally and it works perfectly fine.
I have one user that when trying to print to a color laser jet printer it only comes out in color. I even set the Plot style to monochrome.stb, (which is a network file that others use without issue) have Plot with plot styles checked, and even tried checking the black and white only in the printer properties. This is Autocad 2012.
Is there something I am missing to have the print out come out in black and white? Te print preview shows it in color.
Forgot to mention, if another user opens the drawing, it prints in black and white ok.
When I am in page setup manager and want to use the "Adobe PDF" plotter device, I can't set a paper size other than the standard one like letter, legal, 11x17 ect. I need to have the "Adope PDF" plotter to print a Arch D size paper but that selection dosent even show up.
I have troubleshooted all the usual supects, of going to properties next to the printer selection bringing me to the plotter configeration page, where in the device and documents tab I then proceed to the custom properties selection, where the adobe document properties page comes up and under the adobe pdf setting tab...I still cant change or find the Arch D 24x36 paper size under the adobe pdf paper size selection tab other than the standard seletions.
I tried printing a plan with my printer and for some reason it wont print in portrait mode, no matter how much i change the settings it does not change the page orientation, the preview also shows it to be in landscape mode
View 3 Replies View RelatedI have some very strange problems printing from Autocad. Some of the text is missing. The printer used is a HP9500. If I use a PDF driver to print to file, then print from the PDF file, it's ok, the text is showed, but printing directly from autocad has been resulting in this type of issue.
I checked the layers, and they are ok. The fonts are ok. It's not printing some text "near the viewport" borders. It was what I could conclude.
