CorelDRAW Graphics Suite X6 :: Maintain Title Block With Print Imposition?
Jul 24, 2013
trying to figure out a way to use imposition to merge images from multiple pages on to a single page while maintaining a constant element (title block) on the page.
1. Creating a drawing of a sign for client proof/approval
2. Use print merge to create duplicates of that sign on separate pages with the varying messages
3. Use imposition to cluster several signs from the separate pages I now have on to a single page
4. (Problem Step) Figure out how to maintain a title block on my page of now clustered signs
I'm going to attempt to post an image of the page style I want with the title block. What I'd like is what is shown here only with some way to automate it so I can have multiple versions of that sign show up on this same page.
View 7 Replies
ADVERTISEMENT
Jun 28, 2012
view.jpg
since i upgraded to X6 i cannot do imposition anymore, using print merge.
Before i set a page with lets say A5 with the layout, and then in the print merge, i would put 4up (four A5), and it went well, using (collate and cut as well).
Now look at my attached file, the first page stays different size.
View 11 Replies
View Related
May 30, 2012
I am going to be printing some raffle tickets. I need them to be numbered sequentially. I have found out how to do the numbering using the printmerge function.
I am going to be doing 8 up. Seems like the easiest way is to design one ticket, then use the print merge feature, and then use the layout imposition tool. However, I would like to have a light colored watermark behind all the tickets.
To make this simple to understand (hopefully) lets just say I want the word "TICKET" repeated over and over again horizontally and vertically untill it covers the whole page.
Of course if I was going to hand number these I would simply design an 8 up print and then put the TICKET watermark behind it no problem.
I could simply crop the watermark and place it in the single 1 up design, and then use print merge and layout imposition, but then the pattern would be exactly the same on all tickets and I would have to cut them in exactly the right place. Whereas if I did 8 up, I wouldn't have this problem.
View 1 Replies
View Related
Dec 20, 2011
If you noticed that the colour palatte colours in CorelDraw X5 are different to those in Version 10. It is more brighter and also come out much brighter when converted to PNG files.
When I zoomed in the PNG files in Version 10 I can see the small grey dotted on the image colours.
But these dotted not appeared on the PNG files in CorelX5. Is that the reason of different colours bright in X5?
What should I do to maintain the same colours bright of Version10 in X5? This is very compulsory as the PNG files version 10 has been use in the database for many years and I have to maintain the same PNG output after upgraded into X5..
View 4 Replies
View Related
May 3, 2013
I have a book of 240 pages, which I need to print in sections of 16pp. But over two sheets - so not just one... How I can set this to be correctly imposed? I need two sheet with 4 pages up, double sided, one folded within the other so the order of pages is as follows:
Sheet 1 - pp. 1, 16, 8, 9
sheet 2 (back of 1) - pp 15, 2,10, 7
sheet 3 - pp 11, 6, 14, 3
sheet 4 (back of 2) - pp 5, 12, 4, 13
I know that I will have to send the sections separately - I.e. pp 1 - 16 = first section, pp 17 - 32 = second section etc... but how can I see the two sheets, how can I change the page numbers ?
I have tried to choose from presets of layouts - the book is to be prefect bound, but there is not an option for it - or not an obvious one I can see...
View 5 Replies
View Related
Jun 19, 2012
Maintain aspect ratio while cropping image with PhotoPaint X5?
View 5 Replies
View Related
Mar 11, 2013
imposition.jpg
I have been using X3 for a long time and have had a way of printing some badges whereby I went to ‘Print’ and then to ‘Preview’ and then clicked on the ‘Imposition layout tool’ icon and then set the page to however many I wanted on a page as in the picture. I need to print 4x1. However, in X6, it doesn't give me that option. I go to ‘Print’ and click on the ‘Layout’ tab and then there are some defaults in the ‘Imposition layout’ drop down menu as in the second picture but there’s no option for 4x1.
View 14 Replies
View Related
Mar 21, 2013
I have used CDPhPaint11 many years. My computer has Windows XP. All the applications have functioned well until I recently foud out that when I open my CDPhPaint, the Titel bar (the blue one) does not appear at all. If I want to close the application, I have to use "File" option. The symbolls X, -, and "squeres"are not visible. They are in other CD application on the right upper corner. What is the problem with the TitelBar? I tried to put the program anew tro computer.
View 2 Replies
View Related
Mar 22, 2011
Export is weird, maintain size is checked but it dose not give the proper size. My page size is 922x1344, but the image exported is half that size.
View 14 Replies
View Related
Nov 6, 2013
I am making a book cover. Given an existing photo for the background, I want to overlay some text (title and author), move it around, resize it, change fonts, choose font color and outline, etc. When I have settled on the text properties, I want to try it on various background photos without redoing the text properties each time. What is the best way to do this?
View 1 Replies
View Related
Nov 6, 2013
I have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
View 7 Replies
View Related
Feb 3, 2012
I'm having an issue with Autocad LT 2010 where when I xref in my title block which has our company logo in color, the logo will only print in black and white. If i open just the title block and print it, it will then print in color. I only seem to have this problem when the title block is xref'd in. I downloaded the 2012 demo version of AutoCadLT and it prints just fine?This has just started happening when my computer was upgraded to Windows 7 64 bit.
View 8 Replies
View Related
Mar 29, 2011
Why am I having trouble printing out an 8.5 X 11 full coverage page when my setting says there are no issues?
Also, why does it want to print inside the dotted border if I have it set to print full page?
View 13 Replies
View Related
Aug 4, 2011
I am unable to print over 6' in length even if the file size is small. I am using a Roland SP-300.
View 5 Replies
View Related
Jul 13, 2012
I'm trying to print a flier on A6 paper on an HP CP1515n. I set the paper size in Corel 12 to A6, then set the paper size on the printer to A6. The paper feeds through very nicely - with nothing on it.
It works fine printing from MS Word so I am placing the paper correctly.
Using XP Home Edition SP 3.
I am currently printing on A4, then cutting into 4. I have found a cheap source of A6 paper but can't get my fliers to print.
View 14 Replies
View Related
Oct 10, 2012
I want to start a project on Corel which will be initially printed. So I will start with the basic Cmyk template given from the window that pops up and make sure that the Color Managements is set correctly for printing settings.
My question now lies: What should I do if the same project has to be uploaded on the web too? What I would do is:
1. Create a new project selecting the RBG template given from the window that pops up.
2. Paste the project
3. Convert the colors to RGB
4. Set the Color management to RGB settings.
5. Export.
View 3 Replies
View Related
Jun 22, 2013
I have to make print merge firelds in CDX6.
The problem is that I have not Excel on my PC. Only Open office. I create a csv file but Open Office asks me every time what the Field and Text delimiter have to be - for the Field "," ";" ":" "tab" or "space" and for the Text " or '. After that it asks me to check or not few check boxes. See the picture below.
I tryed few combinations but the same result - Failed to save print merge data!
I dont know what to chek but the biggest problem is that I tryed to save a txt tab delimited on other computer with excel and when I try to print merge after loading the txt file Corel says Failed to save print merge data.
I saw that we can Print merge directly from xls files but I cant find that option in ODCB Data Source. Weird! because I have to do 1100 badjes with different merge fields like country, name, code etc... and if I start to make them by hand it will be forever!
View 7 Replies
View Related
Feb 14, 2012
No matter what size doc I create when I go to print it only shows letter size. Tried re-saving, changed page layout, etc. with no luck. If I press print I get a page size missmatch error.
View 7 Replies
View Related
Jul 15, 2013
We are having issues with Corel X6: when we try print preview, the print preview window opens, but after we click print, it just crashes and that's it.
Both corel and Windows are updated, and the machine is clean.
View 10 Replies
View Related
Jun 29, 2012
I'm currently working on an XP 32 bit system with AMD Athlon 64 3200+
CorelDraw is displaying a print preview but is otherwise completely idle. It has finished displaying the preview, so it is just waiting for user action but has nothing else to do.
Photopaint in another window was running extruciatingly slow so I checked task manager. CorelDraw.exe was showing to be using 98% of the CPU.
On further investigation, this happens only when the print preview is on the screen. I close the print preview, return to CorelDraw design screen and CPU is 0% when idle. I do another print preview -- 98% CPU again.
I'll try it later on a quad core system, but it seems that print preview should not be hogging the CPU when idle waiting for operator action.
View 10 Replies
View Related
Aug 13, 2011
I have a rather large job, a book with 370 pages. when we want to reprint w/o any changes i would like to turn off the print preview to eliminate the delay.
How to bypass the print preview?
View 10 Replies
View Related
Nov 28, 2011
After successfully using Corel Draw for some years, I am suddenly unable to print files. Instead of the file, my printers just print a black page. I have tried re-installing but it has not worked.
View 1 Replies
View Related
Aug 22, 2012
I have problem with printing shadows. I have dark gray background and I made box to which I created shadow. No problem there. But when I print the document, the box surrounding shadow (the one I can use to change dimension or rotate, which isnt visible) changes my dark gray background.
View 2 Replies
View Related
Jan 6, 2012
When I am printing my design, the black is not printing. Have tried on two printers, neither are faulty. Wondered if I accidentally have it on a setting that doesn't allow it to print black.
View 3 Replies
View Related
May 15, 2012
Previously I could choose a large paper size on my printer select fit to page and the document would scale up to printer out on paper large than than the design page. When I try this with X6 the image disappears. Is this a known bug?
View 4 Replies
View Related
Dec 19, 2011
I created a list if voucher numbering from 1001 to 1200, but when I perform the Print Merge, the list shown are with one decimal point i.e. 1001.0, 1002.0, etc....
What is the reason for this?
View 4 Replies
View Related
Aug 27, 2012
I need to replace all colors of document (except black) with one pantone. Is it possible?I've imported pdf file with vector and bitmap graphics, but it has few colors. I need to use just 2 colors in print. Is it possible to replace CMY with one pantone in print? How can I do it?Something like that:
View 4 Replies
View Related
May 8, 2010
I have a problem with printing in X5. All the documents I've worked in X4when I print the X5 have a problem with the colors, they are not the same with X4.
Printing with: HP inkjet 110 A0Riso RZ370, RZ590 A3Epson inkjet 1400 A3Canon laser LBP5200 A4HP laser 1010 A4
View 10 Replies
View Related
Feb 23, 2012
I just purchased and installed X5 on my Win 7 Pro system. I work with large files (8-10MB) using multiple OLE linked CDR files and bitmaps. When I export to PDF using the built-in exporter, most of the OLE files do not print and the ones that do are corrupted. I have made a work around using doPDF V7, but believe this should work out of the box.
View 3 Replies
View Related
Apr 7, 2011
I have just ugraded 4 computers to X5 (one w7, 3 with XP) and are having a lot of problems with the application crashing or hanging. Applies to all computers. We do a lot of print merges, more than 100 a day. Happens randomly, but mainly after several jobs have been printed (jobs, 5-10, still open in X5 in case som modifications are needed).
View 3 Replies
View Related
Oct 22, 2012
What function do these points? I think the "MICRODOT" is for an accurate print.
View 2 Replies
View Related
