I need to replace all colors of document (except black) with one pantone. Is it possible?I've imported pdf file with vector and bitmap graphics, but it has few colors. I need to use just 2 colors in print. Is it possible to replace CMY with one pantone in print? How can I do it?Something like that:
View 4 RepliesCDX5: Whatever color I select for fill or outline is now set as the default color for fills and outlines without expressly setting it as such. Until now when I left or right click a color with nothing selected it allowed me to set it as a default fill or outline color for graphics, artistic text, or paragraph text. It does not do that now.
Is this a "feature" that's been added that I somehow enabled? In any event, how do I turn it off?
I work for a trophy company and we set up all of our trophy plates in Corel. The company that I used to work for used EngraveLab. With EngraveLab I could make a Notepad file with all of the information that I wanted for each trophy plate. Then I would go into EngraveLab and set up one, hit a few buttons and it would automatically set up each plate for me, using the Notepad file to replace the text on each one. In a few minutes I could have 500 or more name plates set up. My question now is there a way to automate the text replacement so I do not have to mistakenly copy and paste each name by hand?
View 3 Replies View RelatedWhy does the find and replace functionality have to be so sloppy to use? I have a customer that sends me cmyk drawings and I need them to be rgb. They also have lines that need to be changed to hairline from .25pt. It's frustrating how difficult this is to accomplish due to the sloppy interface that CD has had ever since I've been using it - since v12.
How hard would it be to allow you to change the palette, line width and colors on lines and outlines in one step? Right now it's multiple steps and don't forget once to change the target color palette or you'll convert everything back to cmyk...
I used the "find and replace text" and although my spelling was correct, it dindn't "find" it... But now the box wont go away and I cannot do ANYTHING on my page!!!
View 2 Replies View RelatedCorel Draw X5 (32 bit) ships with gpl ghostscript 8.64 (32 bit). On my PC (win7 ultra x64) is installed gpl ghost script 9.02 (x64) too.
Does CDR use the built-in gs hard-coded or does it read the information from the registry (or some config file), so I could "redirect" CDR to my newer version? I´d like to do this (any problems about x64 ?) and then uninstall gs 8.64 (that came with CDR).
Is it possible to do so and tag here any problems about incompatibilities?
my find and replace is working for current page only. even if i use replace all command. what should i do to make it work for the whole document?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
How would I go about changing the font of a text through all pages? I've used Find/Replace tool but it stops on one page.
View 9 Replies View RelatedI need to replace a common image on every page of a 32pp document. The reason being the original one has no bleed on. I have retouched the image to include bleed, but how do I replace or re-link the new one?
There is no links showing up in my links dialog docker at all..?
SCAN0033.JPG
I have Outsourced these Business cards to the same company. See attached.
One is more vibrant than the other, which were done at different dates.
The process consist of Publishing to PDF and noticing after we received them, both came out Different.
Soon after I opened both PDFs and they were different on my end.
What can I do to maximize color and make them vibrant like the one on the left?
The kind of graphics I do are used for a web site and also for printing with a Roland Versacamm wide format printer. My question is for graphics for a web site do you design in RGB colors and when you design for printing are you using CMYK colors.
Or are you using one type of color over the other for both purposes?
I'am having trouble with the color management of x5. In coreldraw11 everything works great, but in x5 the colors seem to be bleached.
How can I get the same results in X5 as I have in coreldraw11? I print with a Epson sw515,
In X6 it appears the option that X4 had (is not available) was I could right click the arrow at the top of one of my Palettes and go down to (Palette) and then there, their was an option for find color. X6 doesn't have that. Also the eye dropper is shaded so I can not use it.
View 4 Replies View RelatedI read somewhere that "Proof Colors" is not a feature introduced in X5 but there was also in X3. Is that true?
View 5 Replies View RelatedIs there a way of adjusting all the colors on a design to 50% to 25% of their intensity at the same time rather than do it one by one?
I went to print>misc.>proofing options: but I only see full color proof and no addition level setting.
It's probably an easy step but i just haven't figured it out yet.
I just purchased the new formula guide and digital software manager from Pantone. I have successfully imported the home and fashion colors into Corel Painter, but I am having trouble doing this in CorelDraw. I see nothing on the adobe swatch exchange (.ase) or importing the new PMS colors.
View 2 Replies View RelatedHow to add spot colors together to get the third color
View 11 Replies View RelatedI use to use Coreldraw X3 when I open the files in X5 the colors have turned to green(on vista) just got Windows 7 (64-bit)and when I open files from X3 and X5 the colors have all turned to white now.
View 3 Replies View RelatedI have a problem with spot colors from X3 to X5. I have defined some spot colors in my X3 to tell my Roland Printer what he has to do. When i open a file, made in X3 using one of these spot colors, with my new X5, the spot color will be replaced with turquoise. I have no problems opening x3 files in x5 when i used a color from the CMYK palette.
Is there a solution to retrieve my spot colors?
I have an object that I would like to create an inside contour. Just 4 inside contours. However, how can I pick what colors I want for the individual contours?
View 5 Replies View Relatedwhen I select "all objects" via the menu and remove the setting "scale with object" from the object properties the color changes from CMYK to RGB. I cannot even redo. All actions are redone but not the color. The primary color of the document is CMYK. This happens only to the borders and not to the fillings.
View 1 Replies View RelatedI'm been trying to change this font to have three colors. The stars, the fill and the outline.
View 11 Replies View RelatedI would like to know how to export a 2 color *.cdr creation (logo) as an *.eps such that it has two grey scale layers each representing the two spot colors I chose?
View 9 Replies View RelatedFor better speed i'm using coreldraw 12. All of a sudden it is showing different colors for files. A color shows up different in version 14 [ that is the correct display ] . it is incorrectly being showed in version 12. i've put up screenshots of both versions. What setting is messed up in version 12.
THIS IS THE INCORRECT ONE AS SEEN IN VERSION 12 . The file is same
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I just upgraded to X6 from X4 about 2 weeks ago. I do all of my work in spot colors since i'm in the screen printing industry. Since not all of my clients have upgraded I still have to save down my work to X4. This is where the problem begins. When its been saved down it's creating a LOT of extra colors in the print separations. It's a lot of the same color. For instance I used black, Pantone Rhodamine Red and Pantone Yellow...when I save it down to X4 it's giving me 2 blacks, 3 Rhodamine Reds and about 10 Pantone Yellows. When I export to pdf and open in Corel X4 it doesn't do this...only when I save down. I don't want to have to export and open each time I have to send a file.
View 14 Replies View RelatedMy problem is when I design something on CorelDraw X6, the CMYK colors look good but when I print the project at Walmart, the colors are richer/darker looking and or some of the colors are off. The Walmart I send my files to uses an Epson 7890 printer and Kodak Color Edge EKTA photo paper.
I've calibrated my monitor so I don't believe that is the issue. The color profile it's set to now is sRGB and the preset is North American General Purpose. I've also called Epson and they told me to call Kodak which I did and the Kodak person told me to contact the Corel People. I figured I'd tap into the CorelDraw Forum collective wisdom first before trying support.
I have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
colors.jpg
See the examples below. I have a table with 24 different colors. When I determine to create a custom palette with 24 shades of this table, all colors are added to my custom palette (pic. 1).
Now, assuming I double them to 48 tones, which the criterion adopted by CorelDRAW to create the midtones? Note that Green color, in the second row (pic.2), has not an intermediary tone, while for White (last color) were created three options.
I am designing a stained glass panel in corel, I have the glass colors on a pdf from the glass maker. Is there any way to add these to a palette?
View 10 Replies View RelatedI jumped from using Windows XP with CorelDraw 11 to Windows 7 with CorelDraw 16, and ever since then, I have been having problems with colors changing in my PDF files. Before I send the file, I open it in Adobe Acrobat Pro to make sure the colors look correct, and they look fine..., but the person who is receiving the PDF tells me that when they open up the file, the colors change (usually to black), or nothing appears at all. What is up with this? I use Pantone Solid Coated colors in my PDF files because that is what we use to match our silk screening inks.
View 14 Replies View RelatedI have an eps file that fades in color when imported to Corel Draw X4. Could there be something missing in the Adobe Illustrator eps file that causes this or is it a problem with Corel?
I'm using Corel Draw X4 with the SmartDesigner X4 add-on package. Also, I recently added a sublimation printer to the mix. But, it doesn't seem to matter which printer I send the image to, the colors are faded in Corel draw even before I attempt to print.