I'am having trouble with the color management of x5. In coreldraw11 everything works great, but in x5 the colors seem to be bleached.
How can I get the same results in X5 as I have in coreldraw11? I print with a Epson sw515,
CDX5: Whatever color I select for fill or outline is now set as the default color for fills and outlines without expressly setting it as such. Until now when I left or right click a color with nothing selected it allowed me to set it as a default fill or outline color for graphics, artistic text, or paragraph text. It does not do that now.
Is this a "feature" that's been added that I somehow enabled? In any event, how do I turn it off?
SCAN0033.JPG
I have Outsourced these Business cards to the same company. See attached.
One is more vibrant than the other, which were done at different dates.
The process consist of Publishing to PDF and noticing after we received them, both came out Different.
Soon after I opened both PDFs and they were different on my end.
What can I do to maximize color and make them vibrant like the one on the left?
The kind of graphics I do are used for a web site and also for printing with a Roland Versacamm wide format printer. My question is for graphics for a web site do you design in RGB colors and when you design for printing are you using CMYK colors.
Or are you using one type of color over the other for both purposes?
In X6 it appears the option that X4 had (is not available) was I could right click the arrow at the top of one of my Palettes and go down to (Palette) and then there, their was an option for find color. X6 doesn't have that. Also the eye dropper is shaded so I can not use it.
View 4 Replies View RelatedI read somewhere that "Proof Colors" is not a feature introduced in X5 but there was also in X3. Is that true?
View 5 Replies View RelatedIs there a way of adjusting all the colors on a design to 50% to 25% of their intensity at the same time rather than do it one by one?
I went to print>misc.>proofing options: but I only see full color proof and no addition level setting.
It's probably an easy step but i just haven't figured it out yet.
I just purchased the new formula guide and digital software manager from Pantone. I have successfully imported the home and fashion colors into Corel Painter, but I am having trouble doing this in CorelDraw. I see nothing on the adobe swatch exchange (.ase) or importing the new PMS colors.
View 2 Replies View RelatedHow to add spot colors together to get the third color
View 11 Replies View RelatedI use to use Coreldraw X3 when I open the files in X5 the colors have turned to green(on vista) just got Windows 7 (64-bit)and when I open files from X3 and X5 the colors have all turned to white now.
View 3 Replies View RelatedI have a problem with spot colors from X3 to X5. I have defined some spot colors in my X3 to tell my Roland Printer what he has to do. When i open a file, made in X3 using one of these spot colors, with my new X5, the spot color will be replaced with turquoise. I have no problems opening x3 files in x5 when i used a color from the CMYK palette.
Is there a solution to retrieve my spot colors?
I have an object that I would like to create an inside contour. Just 4 inside contours. However, how can I pick what colors I want for the individual contours?
View 5 Replies View Relatedwhen I select "all objects" via the menu and remove the setting "scale with object" from the object properties the color changes from CMYK to RGB. I cannot even redo. All actions are redone but not the color. The primary color of the document is CMYK. This happens only to the borders and not to the fillings.
View 1 Replies View RelatedI'm been trying to change this font to have three colors. The stars, the fill and the outline.
View 11 Replies View RelatedI need to replace all colors of document (except black) with one pantone. Is it possible?I've imported pdf file with vector and bitmap graphics, but it has few colors. I need to use just 2 colors in print. Is it possible to replace CMY with one pantone in print? How can I do it?Something like that:
View 4 Replies View RelatedI would like to know how to export a 2 color *.cdr creation (logo) as an *.eps such that it has two grey scale layers each representing the two spot colors I chose?
View 9 Replies View RelatedFor better speed i'm using coreldraw 12. All of a sudden it is showing different colors for files. A color shows up different in version 14 [ that is the correct display ] . it is incorrectly being showed in version 12. i've put up screenshots of both versions. What setting is messed up in version 12.
THIS IS THE INCORRECT ONE AS SEEN IN VERSION 12 . The file is same
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I just upgraded to X6 from X4 about 2 weeks ago. I do all of my work in spot colors since i'm in the screen printing industry. Since not all of my clients have upgraded I still have to save down my work to X4. This is where the problem begins. When its been saved down it's creating a LOT of extra colors in the print separations. It's a lot of the same color. For instance I used black, Pantone Rhodamine Red and Pantone Yellow...when I save it down to X4 it's giving me 2 blacks, 3 Rhodamine Reds and about 10 Pantone Yellows. When I export to pdf and open in Corel X4 it doesn't do this...only when I save down. I don't want to have to export and open each time I have to send a file.
View 14 Replies View RelatedMy problem is when I design something on CorelDraw X6, the CMYK colors look good but when I print the project at Walmart, the colors are richer/darker looking and or some of the colors are off. The Walmart I send my files to uses an Epson 7890 printer and Kodak Color Edge EKTA photo paper.
I've calibrated my monitor so I don't believe that is the issue. The color profile it's set to now is sRGB and the preset is North American General Purpose. I've also called Epson and they told me to call Kodak which I did and the Kodak person told me to contact the Corel People. I figured I'd tap into the CorelDraw Forum collective wisdom first before trying support.
colors.jpg
See the examples below. I have a table with 24 different colors. When I determine to create a custom palette with 24 shades of this table, all colors are added to my custom palette (pic. 1).
Now, assuming I double them to 48 tones, which the criterion adopted by CorelDRAW to create the midtones? Note that Green color, in the second row (pic.2), has not an intermediary tone, while for White (last color) were created three options.
I am designing a stained glass panel in corel, I have the glass colors on a pdf from the glass maker. Is there any way to add these to a palette?
View 10 Replies View RelatedI jumped from using Windows XP with CorelDraw 11 to Windows 7 with CorelDraw 16, and ever since then, I have been having problems with colors changing in my PDF files. Before I send the file, I open it in Adobe Acrobat Pro to make sure the colors look correct, and they look fine..., but the person who is receiving the PDF tells me that when they open up the file, the colors change (usually to black), or nothing appears at all. What is up with this? I use Pantone Solid Coated colors in my PDF files because that is what we use to match our silk screening inks.
View 14 Replies View RelatedI have an eps file that fades in color when imported to Corel Draw X4. Could there be something missing in the Adobe Illustrator eps file that causes this or is it a problem with Corel?
I'm using Corel Draw X4 with the SmartDesigner X4 add-on package. Also, I recently added a sublimation printer to the mix. But, it doesn't seem to matter which printer I send the image to, the colors are faded in Corel draw even before I attempt to print.
My document palette adds the same colors that are NEVER in my art every time. I swear it's a glitch. The colors are so bizzare. And when I go to delete any of them, it says I can't because they are in use. But they are for sure not being used.
Here's a list of the colors:
Black A0QM, Pantone 142, Black A0QM (1), Black A0QM (2), Black A0QM (3), DIC 2287p* (1), PANTONE 142 (1), Black A0QM (4), PANTONE 142 (2), Black A0QM (5), Black A0QM (6), Black A0QM (7), DIC 2287p* (1) (1), PANTONE 142 (3)
That's the order they are always in. I don't even know where you would get any of those colors and what they would be used for? Except the Pantone of course.
Is there a quick way to sort or group like colors of curves together automatically? For instance, If I go through and color a vector - I want to have all the purple together, and all the orange together, etc.
View 5 Replies View RelatedSome colors such as yellow are being replaced with other colors in the CMYK palette.
View 4 Replies View RelatedIn 2006 I started a vector-based comic using CorelDraw, made for posting on the web in RGB. Over the years I've made the transition to a more CMYK-friendly palette that works on the web, though a handful of heritage characters still have the old RGB profiles. I'm looking to do a book collection now and, as such, want to convert these characters' specific colors to their fitting CMYK counterparts.
Is there a batch process that allows me to convert a specific handful (maybe 2 dozen) colors RGB --> CMYK across a number of files? I'm looking at hundreds of pages of artwork here, so even Corel's Object Find/Replace would be a tedious slough.
i always use corel for designing an advertorial matter, but there's always something that bothering me when i get the print results.. why does the colors especially blue and green always looks so dark, infact, they became brown and purple..
View 1 Replies View Relatedin Corel X6, some spot colors, either pantone,custom or others, after re-opening files, these colors appearas NO NAME, and the object assigned to them appear withno fills?It never happens with RGB or CMYK colors.
View 1 Replies View RelatedI recently just got the X5 version of Corel. I have been having problems holding the brightness of my colors when I export to web in a png format. All of my colors look dingy compared to my original drawing. I found a good black on my 256 shades of gray palette that looks the same after you export. Is there a color palette that will hold the brightness of the colors better than the rest when exporting for png? Or is there a better way to get my drawing as a transparent background and keep my colors bright?
View 1 Replies View RelatedHow do I ensure that I'm printing accurate colors? As color is so subjective how do I confirm that I have it correctly?
View 6 Replies View Related