CorelDRAW Graphics Suite X6 :: Create Palette Colors From Selection
May 29, 2012
colors.jpg
See the examples below. I have a table with 24 different colors. When I determine to create a custom palette with 24 shades of this table, all colors are added to my custom palette (pic. 1).
Now, assuming I double them to 48 tones, which the criterion adopted by CorelDRAW to create the midtones? Note that Green color, in the second row (pic.2), has not an intermediary tone, while for White (last color) were created three options.
View 9 Replies
ADVERTISEMENT
Apr 11, 2013
Is there an easy :) way to create a color chart (which I can print later) with Corel Draw?
1. I want to use a single color palette, e.g. one of the Pantone range.
2. Each color of this palette should be the filling of a certain shape (all shapes are similar), so that the number of shapes equals the number of colors in the palette.
View 2 Replies
View Related
Jul 26, 2011
I am designing a stained glass panel in corel, I have the glass colors on a pdf from the glass maker. Is there any way to add these to a palette?
View 10 Replies
View Related
Feb 22, 2012
My document palette adds the same colors that are NEVER in my art every time. I swear it's a glitch. The colors are so bizzare. And when I go to delete any of them, it says I can't because they are in use. But they are for sure not being used.
Here's a list of the colors:
Black A0QM, Pantone 142, Black A0QM (1), Black A0QM (2), Black A0QM (3), DIC 2287p* (1), PANTONE 142 (1), Black A0QM (4), PANTONE 142 (2), Black A0QM (5), Black A0QM (6), Black A0QM (7), DIC 2287p* (1) (1), PANTONE 142 (3)
That's the order they are always in. I don't even know where you would get any of those colors and what they would be used for? Except the Pantone of course.
View 1 Replies
View Related
Dec 20, 2011
I used to have X4 installed on XP and it worked fine. Recently I re-install the program onto my new Win7 PC. It was working fine at first but one day my CMYK palette turn into some weird colors (much brighter than the original one)
I tried to hold F8 to launch X4 to turn it back to dafault settings but no go. I tried uninstall and reinstall and it's the same. Finally I downloaded the latest X5 Free trial and the color palettes are displaying correctly! (So i figure it's not my monitor's problem nor some Windows setting.)
(X5 Displaying the correct CMYK color palette)(Ised X4 for a few days and the colors became much brighter than the original ones.)
View 3 Replies
View Related
Aug 2, 2011
Is there a setting in CorelDRAW that will automatically add the colors in a design when it is imported/copy-pasted/opened to the color pallette? Like you import a logo and the colors are automatically in the pallette?
View 4 Replies
View Related
Mar 17, 2011
I have a palette provided by Roland for their digital printers to match their standard colors. In order for the colors to be recognized and converted by the RIP, they need to be set as spot colors in CorelDraw X5.
It would be nice if I could change the Treat As Process/Spot attribute for multiple colors at once in the palette editor.
I peeked at the CPL file--unfortunately it's not something easy to edit like XML, CSV or the like. Too bad that, too.
View 2 Replies
View Related
Apr 3, 2012
CDX5: Whatever color I select for fill or outline is now set as the default color for fills and outlines without expressly setting it as such. Until now when I left or right click a color with nothing selected it allowed me to set it as a default fill or outline color for graphics, artistic text, or paragraph text. It does not do that now.
Is this a "feature" that's been added that I somehow enabled? In any event, how do I turn it off?
View 2 Replies
View Related
Mar 5, 2012
I recently started working with X5 and am having a few issues with the importing of palettes.I have created a couple of very large swatch palettes (about 1044 colors) in Photoshop CS4 and Illustrator CS4 that I would like to not have recreate in X5 (each swatch is custom named).
The photoshop swatch palette is saved as an .ACO file. I am able to open the .ACO palette in X5, however, the CMYK values do not match, and the custom name does not transfer.
-As an example, my custom black swatch in the .ACO file is called A1 and its CMYK value is 60, 49, 47, 100. However, when opened in X5 it is only identified by its CMYK value, which has changed to 29, 22, 29, 30 (which is more of a semi-dark grey than a black). In fact, all of the colors look as if they have been desaturated by 50-75% (that's a huge guesstimate on my part).
After struggling with my .ACO palette I thought I would try to import my .AI file.
X5 gives the option to open a palette that was created in Illustrator if the palette itself is saved as an .AI (which can be done directly from the swatch menu in AI. I have tried opening my .AI palette in X5- it allows me to chose the file, however, nothing happens.
View 2 Replies
View Related
Jun 29, 2010
Where can I find RAL Color palette (.cpl) for CorelDRAW?
View 10 Replies
View Related
Feb 5, 2012
How can I change sequence of colors by my own?
Even "edit palette" doesn't work. How to do that? In X4 is OK but in X5 I cannot do that.
View 9 Replies
View Related
Apr 7, 2012
Just upgraded to x6 and is there a way to save my cmyk palette in x4 and paste it into x6.
View 2 Replies
View Related
Jul 19, 2007
My CMYK palette is the same hue as my RGB palette right now. I guess you know the difference. RGB looks bright and high in contrast like the ones used in Microsoft word. And the cmyk is, not the bright... Anyway, so the problem is...its the same color on my monitor. Its looks all RGB. On my other PC-2, its the other way around. My RGB palette looks like CMYK. Its not much of a problem with my PC-2 because i rarely use it for photo editing. Its just use for our cutting machine, the other one, my PC-1..
What's going on because it where i do most of my designs. And the color is a major factor there because most of our clients usually send their design to email and they have specific color. So, im having trouble doing designs. Is there a problem with my monitor? I tried editing my files on PC-2 but if i transfer it to PC-1 the color is different again... I cant get the exact (almost) color i want. The adobe gamma isn't do much either nor the monitor adjustment. Do i need to get a professional calibrator for all my PCs or are there downloadable calibrator on the internet? I was about to try the one about CorelDraw 12 Color Management guide but im still not sure about it. I have to read the infos first.
Here's from my PC-1. To the left is the CMYK and on the right is the RGB
Now here is from my PC-2. Left is CMYK and right is RGB.
When viewed from my PC-2..this one looks all CMYK (and dull)
View 14 Replies
View Related
Aug 8, 2009
Corel crashed once when i used shape tool once for a paragraph text and since then my color palette has gone horrible in its colors...even the guide's default color of Violet has changed to some dark blue...all the colors have gone horrible.
View 14 Replies
View Related
Sep 7, 2011
In my Pantone Coated has no WHITE in it or do any of the other pantone groups. RGB and others do. Is there a way to get white on there.
View 2 Replies
View Related
Jun 30, 2011
I have recently installed X4 after using X3 for a number of years, and it was working fine until suddenly the color pallet has changed to harsh very bright almost unreal RGB-like colours. It is distorting all my work as I cannot see real colours, especially in Photopaint, so impossible to color edit.
View 2 Replies
View Related
Jan 23, 2013
Something strange happened today when I was working on a cdr project. I think I have by mistake somehow managed to completely delete the original rgb palette, copied the cmyk palette and saved it as "rgb" palette. As a result if I try to change the color palette, the rgb and the cmyk options are exactly the same palettes.
This happened whilst I was working on a cdr drawing. Somehow I managed to press a wrong key combination whilst trying to save (probably CTRL-something and then CTRL-S immediately after) and noticed that the colors on my drawing changed. I tried to undo, but nothing happened.
After some checking I realized that the original rgb color palette has been replaced with a copy of cmyk. If I now try to switch color palettes, the cmyk and the rgb are exactly the same palettes regardless of which cdr project I open (new or saved).
This is how I tried to fix the issue:
I tried F8 during startup - no change
I tried with the repair option of the installation cd - no change
I tried a removal and a new installation of the Suite - no change.
Could be worth a try: Maybe someone could send me a copy of their rgbstd.cpl-file so that I could replace mine in the C:Program Files (x86)CorelCorelDRAW Graphics Suite X4LanguagesENProgramsData
How to restore the rgb color palette to it's original status as I work mainly with drawings displayed on the net, not on printed materials and I'm getting desperate as I have a deadline tomorrow.
View 8 Replies
View Related
Jun 7, 2010
The appearance is totally change what i mean is possibly the brightness. Every single color in the color palette change and become a shocking color. But when i print it, they got printed normally as usual. i can't see the true color i want to use in my design. They're all become a really shocking color and too bright than they supposed to be :[URL]
View 4 Replies
View Related
Jan 31, 2012
SCAN0033.JPG
I have Outsourced these Business cards to the same company. See attached.
One is more vibrant than the other, which were done at different dates.
The process consist of Publishing to PDF and noticing after we received them, both came out Different.
Soon after I opened both PDFs and they were different on my end.
What can I do to maximize color and make them vibrant like the one on the left?
View 2 Replies
View Related
Feb 20, 2013
I've really tried to figure this out on my own – you'd think it would be simple. At some early point, before I was at all familiar with CorelDRAW, I closed the document palette, and ever since then it does not open automatically when I start the program or open a document. I have had to open it manually, and I can't seem to find a way to make it open by default.
View 10 Replies
View Related
Feb 14, 2012
This time, my color palette that was on the right side of my screen is gone. How do I get it back on there?
View 3 Replies
View Related
Oct 18, 2012
The kind of graphics I do are used for a web site and also for printing with a Roland Versacamm wide format printer. My question is for graphics for a web site do you design in RGB colors and when you design for printing are you using CMYK colors.
Or are you using one type of color over the other for both purposes?
View 15 Replies
View Related
Mar 25, 2011
I'am having trouble with the color management of x5. In coreldraw11 everything works great, but in x5 the colors seem to be bleached.
How can I get the same results in X5 as I have in coreldraw11? I print with a Epson sw515,
View 14 Replies
View Related
Apr 23, 2012
In X6 it appears the option that X4 had (is not available) was I could right click the arrow at the top of one of my Palettes and go down to (Palette) and then there, their was an option for find color. X6 doesn't have that. Also the eye dropper is shaded so I can not use it.
View 4 Replies
View Related
Jun 22, 2011
I read somewhere that "Proof Colors" is not a feature introduced in X5 but there was also in X3. Is that true?
View 5 Replies
View Related
Mar 29, 2011
Is there a way of adjusting all the colors on a design to 50% to 25% of their intensity at the same time rather than do it one by one?
I went to print>misc.>proofing options: but I only see full color proof and no addition level setting.
It's probably an easy step but i just haven't figured it out yet.
View 11 Replies
View Related
Jan 4, 2013
I just purchased the new formula guide and digital software manager from Pantone. I have successfully imported the home and fashion colors into Corel Painter, but I am having trouble doing this in CorelDraw. I see nothing on the adobe swatch exchange (.ase) or importing the new PMS colors.
View 2 Replies
View Related
Oct 24, 2013
How to add spot colors together to get the third color
View 11 Replies
View Related
Mar 9, 2013
How come I can't choose 48-bit color palette and color picker when editing a 48-bit RGB image?
View 11 Replies
View Related
Nov 10, 2011
For some reason a Document Color Palette doesn't appear by default when I create a new document. It did at one time, but now I have to manually activate it. Not sure what I did to cause this change in behavior, but I'd like to get it back as a default.
View 4 Replies
View Related
Jan 19, 2012
I use to use Coreldraw X3 when I open the files in X5 the colors have turned to green(on vista) just got Windows 7 (64-bit)and when I open files from X3 and X5 the colors have all turned to white now.
View 3 Replies
View Related
