CorelDRAW Graphics Suite X5 :: Replace Built-in Ghost Script
Mar 13, 2012
Corel Draw X5 (32 bit) ships with gpl ghostscript 8.64 (32 bit). On my PC (win7 ultra x64) is installed gpl ghost script 9.02 (x64) too.
Does CDR use the built-in gs hard-coded or does it read the information from the registry (or some config file), so I could "redirect" CDR to my newer version? I´d like to do this (any problems about x64 ?) and then uninstall gs 8.64 (that came with CDR).
Is it possible to do so and tag here any problems about incompatibilities?
View 2 Replies
ADVERTISEMENT
Mar 28, 2012
Is this possible to hide the ghost display which is not in x5. This is confuses me often.
View 7 Replies
View Related
Aug 27, 2012
I need to replace all colors of document (except black) with one pantone. Is it possible?I've imported pdf file with vector and bitmap graphics, but it has few colors. I need to use just 2 colors in print. Is it possible to replace CMY with one pantone in print? How can I do it?Something like that:
View 4 Replies
View Related
Dec 6, 2011
I work for a trophy company and we set up all of our trophy plates in Corel. The company that I used to work for used EngraveLab. With EngraveLab I could make a Notepad file with all of the information that I wanted for each trophy plate. Then I would go into EngraveLab and set up one, hit a few buttons and it would automatically set up each plate for me, using the Notepad file to replace the text on each one. In a few minutes I could have 500 or more name plates set up. My question now is there a way to automate the text replacement so I do not have to mistakenly copy and paste each name by hand?
View 3 Replies
View Related
Aug 24, 2012
Why does the find and replace functionality have to be so sloppy to use? I have a customer that sends me cmyk drawings and I need them to be rgb. They also have lines that need to be changed to hairline from .25pt. It's frustrating how difficult this is to accomplish due to the sloppy interface that CD has had ever since I've been using it - since v12.
How hard would it be to allow you to change the palette, line width and colors on lines and outlines in one step? Right now it's multiple steps and don't forget once to change the target color palette or you'll convert everything back to cmyk...
View 9 Replies
View Related
Apr 10, 2012
I used the "find and replace text" and although my spelling was correct, it dindn't "find" it... But now the box wont go away and I cannot do ANYTHING on my page!!!
View 2 Replies
View Related
May 30, 2012
my find and replace is working for current page only. even if i use replace all command. what should i do to make it work for the whole document?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 4 Replies
View Related
Jun 24, 2011
How would I go about changing the font of a text through all pages? I've used Find/Replace tool but it stops on one page.
View 9 Replies
View Related
May 27, 2011
I need to replace a common image on every page of a 32pp document. The reason being the original one has no bleed on. I have retouched the image to include bleed, but how do I replace or re-link the new one?
There is no links showing up in my links dialog docker at all..?
View 2 Replies
View Related
Sep 9, 2011
I'm making tickets and i need to add tickets numbers, from 1 to 1000. Print & Merge doesn't fit for me.So I want to change text tag for example: "<text>" to text which will be different (1, 2 ,3 ,4 ,5 ,6 ,7 ...) Wagenaar where the code finds word "Andorra" and change it to "Andorre".
Public Function FindReplace(ByVal str As String, ByVal toFind As String, ByVal toReplace As String) As String Dim i As Integer For i = 1 To Len(str) If Mid(str, i, Len(toFind)) = toFind Then ' does the string match? FindReplace = FindReplace & toReplace ' add the new replacement to the final result i = i + (Len(toFind) - 1) ' move to the character after the toFind Else FindReplace = FindReplace & Mid(str, i, 1) ' add a character End If Next iEnd Function.
[code]...
View 2 Replies
View Related
Oct 4, 2012
Is there a way to replace all "ghost" colors in the doc (colors that don't exist in the swatches palette) with a global process color?
View 4 Replies
View Related
Aug 29, 2011
I’m new to this forum and to 3D animation. I am a long time user of Corel draw and Final Cut Studio.
I am preparing for a video project that will involve a lot of 3d animation and am thinking of using Maya (on a Mac).
Can I use Corel draw or Adobe illustrator to create basic models for importing into Maya?
In particular, I have created some very complex 2d contour maps, the specific geography of which is important and must not change, each contour height has been given its own drawing layer so that I can easily manipulate the maps. Can I import and then create 3d animated landscapes from this type of graphic in Maya ?
View 3 Replies
View Related
Mar 18, 2012
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
View 7 Replies
View Related
Dec 1, 2010
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies
View Related
Sep 5, 2009
Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies
View Related
Jul 21, 2013
i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
View 4 Replies
View Related
Nov 9, 2011
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
View 4 Replies
View Related
Jul 23, 2011
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
View 4 Replies
View Related
Mar 14, 2011
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies
View Related
Dec 1, 2011
How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
View 1 Replies
View Related
May 9, 2011
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
View 14 Replies
View Related
Jun 19, 2013
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
View 4 Replies
View Related
Oct 18, 2012
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
View 3 Replies
View Related
Jan 2, 2013
02012013010.jpg
Blank Blocks behind text and graphics
View 4 Replies
View Related
Dec 6, 2013
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
View 9 Replies
View Related
May 22, 2011
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies
View Related
Jun 9, 2011
Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies
View Related
Nov 6, 2013
I have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
View 7 Replies
View Related
Jun 13, 2011
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
View 1 Replies
View Related
May 10, 2012
Im using draw x5 graphics software and want to know where to find useful for properly sizing web friendly graphics. I want to build a banner and an icon for my new site.
View 3 Replies
View Related
Jun 10, 2011
how to export png from corel?
View 3 Replies
View Related
