No matter what size doc I create when I go to print it only shows letter size. Tried re-saving, changed page layout, etc. with no luck. If I press print I get a page size missmatch error.
View 7 Replies
I am making a booklet up. I have set the workspace paper size to A5 landscape. And set to booklet and facing pages, great, that is a whole lot of hassle dealt with.
But,
I make up my design, looks good on the screen. Export to pdf and print it off and it is printing one page of my work on a single page of A4 paper full size. i.e. I need it printed onto A4 paper in landscape so that I have a left page and a right page, that I can fold in half. But it is just printing like normal.
What do I have to do to get it two print two pages of information onto a single A4 landscape rotated piece of paper?
I am using a vinyl cutter to cut out some roughly A3 sized artwork however when ether I go to print preview the size is reduced to A4. the settings are correct before, its just whenever i go to print preview mode. I have tried multiple settings but no change
View 3 Replies View RelatedI make an image 15.8 x 29.8 and when it prints out on my canon 8300 it is only 15.5 x 29.5 actual size measured on the canvas. the image is designed to wrap over the edge of stretchers 15 x29. the pics are 3 tenths inch short!
another pic is 15.5 x 29.25 instead of 15.5 x 29.5 so it is 1/4 inch short the long direction.don't recall having this problem before so why are the images not the same size in print that they are on the screen?
I cannot see the full spectrum of my document size in print preview. I have my document setup as 8ft. X 5 ft.
But when i try to see it in print preview it only shows my document between 3 1/2 ft. to 4 1/2 ft.
Export is weird, maintain size is checked but it dose not give the proper size. My page size is 922x1344, but the image exported is half that size.
View 14 Replies View RelatedI have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
Why am I having trouble printing out an 8.5 X 11 full coverage page when my setting says there are no issues?
Also, why does it want to print inside the dotted border if I have it set to print full page?
I am unable to print over 6' in length even if the file size is small. I am using a Roland SP-300.
View 5 Replies View RelatedI'm trying to print a flier on A6 paper on an HP CP1515n. I set the paper size in Corel 12 to A6, then set the paper size on the printer to A6. The paper feeds through very nicely - with nothing on it.
It works fine printing from MS Word so I am placing the paper correctly.
Using XP Home Edition SP 3.
I am currently printing on A4, then cutting into 4. I have found a cheap source of A6 paper but can't get my fliers to print.
I want to start a project on Corel which will be initially printed. So I will start with the basic Cmyk template given from the window that pops up and make sure that the Color Managements is set correctly for printing settings.
My question now lies: What should I do if the same project has to be uploaded on the web too? What I would do is:
1. Create a new project selecting the RBG template given from the window that pops up.
2. Paste the project
3. Convert the colors to RGB
4. Set the Color management to RGB settings.
5. Export.
I have to make print merge firelds in CDX6.
The problem is that I have not Excel on my PC. Only Open office. I create a csv file but Open Office asks me every time what the Field and Text delimiter have to be - for the Field "," ";" ":" "tab" or "space" and for the Text " or '. After that it asks me to check or not few check boxes. See the picture below.
I tryed few combinations but the same result - Failed to save print merge data!
I dont know what to chek but the biggest problem is that I tryed to save a txt tab delimited on other computer with excel and when I try to print merge after loading the txt file Corel says Failed to save print merge data.
I saw that we can Print merge directly from xls files but I cant find that option in ODCB Data Source. Weird! because I have to do 1100 badjes with different merge fields like country, name, code etc... and if I start to make them by hand it will be forever!
Im using draw x5 graphics software and want to know where to find useful for properly sizing web friendly graphics. I want to build a banner and an icon for my new site.
View 3 Replies View RelatedWe are having issues with Corel X6: when we try print preview, the print preview window opens, but after we click print, it just crashes and that's it.
Both corel and Windows are updated, and the machine is clean.
I'm currently working on an XP 32 bit system with AMD Athlon 64 3200+
CorelDraw is displaying a print preview but is otherwise completely idle. It has finished displaying the preview, so it is just waiting for user action but has nothing else to do.
Photopaint in another window was running extruciatingly slow so I checked task manager. CorelDraw.exe was showing to be using 98% of the CPU.
On further investigation, this happens only when the print preview is on the screen. I close the print preview, return to CorelDraw design screen and CPU is 0% when idle. I do another print preview -- 98% CPU again.
I'll try it later on a quad core system, but it seems that print preview should not be hogging the CPU when idle waiting for operator action.
I have a rather large job, a book with 370 pages. when we want to reprint w/o any changes i would like to turn off the print preview to eliminate the delay.
How to bypass the print preview?
After successfully using Corel Draw for some years, I am suddenly unable to print files. Instead of the file, my printers just print a black page. I have tried re-installing but it has not worked.
View 1 Replies View RelatedI have problem with printing shadows. I have dark gray background and I made box to which I created shadow. No problem there. But when I print the document, the box surrounding shadow (the one I can use to change dimension or rotate, which isnt visible) changes my dark gray background.
View 2 Replies View RelatedWhen I am printing my design, the black is not printing. Have tried on two printers, neither are faulty. Wondered if I accidentally have it on a setting that doesn't allow it to print black.
View 3 Replies View RelatedPreviously I could choose a large paper size on my printer select fit to page and the document would scale up to printer out on paper large than than the design page. When I try this with X6 the image disappears. Is this a known bug?
View 4 Replies View RelatedI created a list if voucher numbering from 1001 to 1200, but when I perform the Print Merge, the list shown are with one decimal point i.e. 1001.0, 1002.0, etc....
What is the reason for this?
I need to replace all colors of document (except black) with one pantone. Is it possible?I've imported pdf file with vector and bitmap graphics, but it has few colors. I need to use just 2 colors in print. Is it possible to replace CMY with one pantone in print? How can I do it?Something like that:
View 4 Replies View RelatedI have a problem with printing in X5. All the documents I've worked in X4when I print the X5 have a problem with the colors, they are not the same with X4.
Printing with: HP inkjet 110 A0Riso RZ370, RZ590 A3Epson inkjet 1400 A3Canon laser LBP5200 A4HP laser 1010 A4
I just purchased and installed X5 on my Win 7 Pro system. I work with large files (8-10MB) using multiple OLE linked CDR files and bitmaps. When I export to PDF using the built-in exporter, most of the OLE files do not print and the ones that do are corrupted. I have made a work around using doPDF V7, but believe this should work out of the box.
View 3 Replies View RelatedI have just ugraded 4 computers to X5 (one w7, 3 with XP) and are having a lot of problems with the application crashing or hanging. Applies to all computers. We do a lot of print merges, more than 100 a day. Happens randomly, but mainly after several jobs have been printed (jobs, 5-10, still open in X5 in case som modifications are needed).
View 3 Replies View RelatedWhat function do these points? I think the "MICRODOT" is for an accurate print.
View 2 Replies View RelatedI prints photos with some text overlaid, like title of image, copyright etc.
I select all objects and save the design then print, and sometimes only the text prints! the image/photo does not print.
well that is kind of annoying to have a 12x36 panorama canvas with only the text and not the picture, since the canvas is ruined and costs about $12 a print.
view.jpg
since i upgraded to X6 i cannot do imposition anymore, using print merge.
Before i set a page with lets say A5 with the layout, and then in the print merge, i would put 4up (four A5), and it went well, using (collate and cut as well).
Now look at my attached file, the first page stays different size.
I just installed X6 64bits on my new Windows 7 64 bits machine, so far so good.
But when I try to use the Print Merge wizard, I get this error at the stage where I want to import the lost from an Excel sheet:
