AutoCAD Print / Plot :: Aligning Title Block In Layout Tab?
Jan 6, 2014
Many times when I receive a drawing from an architect, when I go into the layout tab the titleblock info/XREF doesn't line up with the page layout. I would assume it lined up when the architect sent it to me in his software. For years the solution I use is to XREF the architects PDF in the layout and then go to print and change the Print Offset till it looked right in the print preview. Then I would apply it to the layout. I would then take the offsets and apply it to every sheet. This is a very time consuming process and was wondering if there is a better way to make this work and still keep the scales. I was also wondering if there was a way to move and align the layout on the fly in the paperspace.
View 3 Replies
ADVERTISEMENT
Feb 3, 2012
I'm having an issue with Autocad LT 2010 where when I xref in my title block which has our company logo in color, the logo will only print in black and white. If i open just the title block and print it, it will then print in color. I only seem to have this problem when the title block is xref'd in. I downloaded the 2012 demo version of AutoCadLT and it prints just fine?This has just started happening when my computer was upgraded to Windows 7 64 bit.
View 8 Replies
View Related
Sep 17, 2013
When I have my alignment labels and plan view text align to the layout view in Paper Space they plot out very bold.
I am using Style: Swis721 BT-Italic. I use that style in the profile for labels and in plan view. When I plot out the sheet the profile view plots good but the text that was aligned in the plan view is very bold.
View 5 Replies
View Related
Oct 14, 2012
I have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?
Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.
Publish does saving in DWF, PDF... But does not print in the printer.
View 3 Replies
View Related
Sep 12, 2012
I’ve done it before in the past so I know its possible but I have forgotten how. See the attached image I would like to change the printable area of my paper space layout.
View 5 Replies
View Related
Aug 16, 2011
I have a drawing template that I frequently use and am trying to get the title block appear in every layout. Is this possible? It is only displayed on my first layout.
View 4 Replies
View Related
Mar 10, 2012
The most efficient way of inserting a title block (the border around a drawing with text etc) into a layout? Sometimes when I insert a title block it seems like the title block is too big or too small for the layout .
View 9 Replies
View Related
May 30, 2012
I am setting the Custom Properties on a CAD File. The Properties may include "Drawing Number, DrawingName, ProjectName"...
Now using code I want to fetch values of these Properties and set into Layout Title Block.
View 9 Replies
View Related
Jul 3, 2011
I created a Title Block in Model Space with a Scale of 1:100. When I copy it with Base point and paste it in Layout Paper space it do not fit with the default paper space. What will I do?
View 3 Replies
View Related
Nov 30, 2013
Is there any command to fit or re-size a title block to A drawing in the layout?
View 4 Replies
View Related
Apr 16, 2013
I have previously drawn my title block in Model space but i now know the correct way is to draw it in the layout.
Is there anyway of transporting the title block template into the layout and then saving that as a template for my future drawings?
Or do I need to go back to the beginning and draw the title block again from scratch in the layout and then save that drawing as a template for future use?
View 4 Replies
View Related
Dec 17, 2013
I Xreffed my Profile Border (title block) into paper space then xreffed my profile.dwg into the model space. When I plot, the gridlines from the border plot on top of the profile lines. Is there way to change the plot order of the Xref files?
View 4 Replies
View Related
Jul 12, 2012
I created a drawing in model space about 75' x 75'. Then created a title block drawing in paper space. Now would like to mesh the two so I can plot the drawing with title block. When I insert the title block drawing it is so tiny it can't be seen. What am I doing wrong?
View 3 Replies
View Related
Feb 1, 2012
I am trying to get an image within the area of a title block to appear on a plot. However, it will not plot when the drawing is plotted. The raster file is contain within the border when it is placed on the Paper Space and is recognized as a Raster Image when selected within the Paper Space. Why it will not appear on my plot. I am new to this version of AutoCAD 2012 and used Version 2000 previously but not for a couple of years.
View 9 Replies
View Related
Feb 26, 2013
In the title block of a my layout template I have tables inserted for revisions, drawing type, numbering etc. I have type already inserted in those blocks that I typically click on and then type in what I need it to say. My template works on all my other drawings except a particular one that I am currently working on.
When I click on the type, it automatically increases from 3/16" to 8" and enlarges the box to accommodate the new font size.
I've attached a screen. The top is before I click on the word "type" in the lower right corner and the bottom one is afterward.
View 1 Replies
View Related
Jul 17, 2013
I created and saved a title block as a .dwt file, with no problems. When I open my title block, I cannot get a 3D assembly drawing to show as a 3D drawing in the title block on the layout tab. If I transfer the title block to the model space, it rotates to the same usc as the assembly drawing?
View 6 Replies
View Related
Jul 2, 2012
Right now i am using model space only i didn't use the layout but i want create the A3 layout. And I need to attach our customized title block into the layout, how to make it the A3 lay out size and how to attach the title block into layout ?
View 2 Replies
View Related
Jan 5, 2007
I've seen in previous thread's how to add a company logo to your title block/plot frame using a jpg file. Plus i've set the image parameters to 0 to remove the line around the image that appears. I've also set the transparency to "ON" - not sure if this is correct but did it anyway - i think.
My problem is that when I come to print it off - the logo appears with a slight background (very faint grey) when it should be just white. The logo is made up of black and red shapes with black text on a white background.
View 9 Replies
View Related
Aug 7, 2013
I have an A4 peice of paper and need to change the scale of my drawing so it fits onto the page. I remember there was a short cut, but have since forgotten it.
It is currently at 1:1 and want to change that to a more appropriate scale.
View 1 Replies
View Related
Aug 9, 2013
I would like to ask if its possible to extract part of the drawing from modelspace then add title block in lay-out and scale the extracted drawing...how will i do that?
View 9 Replies
View Related
Apr 30, 2013
I need a routine that will duplicate the current sheet's Layout tab and content to the next tab, set it current, delete the titleblock (by name) on the new tab and reference in a differently named titleblock, 1:1, 0,0 onto the new Layout tab. I'll be running this in a batch script.
View 9 Replies
View Related
Oct 28, 2013
I am trying to create a single layout with title blockandviewport to save as a template for future. Right clicking on the layout tab does not produce the menu.
I create a new layout by selecting page set up manager in the file menu, create a new layout, but the tab does not show up at the bottom.
View 9 Replies
View Related
Nov 8, 2003
I get several dwg's a day with up to 40 layouts in each one. All the settings are correct ACCEPT the plotter. Is there a way to set all page setups for all layouts at the same time? Something like select all layouts and do a page setup for all. Possibly with LISP or VBA?
View 5 Replies
View Related
Oct 23, 2013
May i know how to print out many Title Block at a Time. I will like to Print out my Complete CAD Drawing, but I have all together in one Print space, so can some let know how to print them all at once with out printing them one by one.
View 8 Replies
View Related
Apr 4, 2013
our office is having an issue with certain drawings when we create a plot file to be printed by an outside printing company. Other drawings which are set up to plot in the exact same way do not seem to have this problem.
The issue is that everything within the viewport plots as shown in the print preview, however; some of the paperspace elements on our title block do not print. OLE objects, additional viewports for legends, and brackets that are in paperspace are not printing.
View 2 Replies
View Related
Mar 5, 2013
I have 4 layouts all from the same drawing that I need desperately to print now. But for some reason only the border and Title block will print for me. What have I done to cause this? And how can I rectify it? I need to print these tonight
View 3 Replies
View Related
Feb 24, 2012
We have, since moving to 2012 had an issue with our standard Named Page Setups in our DWT file staying assigned to the layout tabs. When you click up to plot a dwg... the Page Setup Name indicating that the Named Page Setup assigned to the plot configuration dialog box says <None>. Even if you click in the drop down and select a setup... the name selected shows as selected after the box colapses... but then a split second later, the box defaults back to <None>.
View 2 Replies
View Related
Oct 8, 2013
why the drawing plots results using the viewport scale in the layout is not accurate?
View 1 Replies
View Related
Jan 3, 2012
I would like to place a parameter in the title block to indicate the view in the plan layout.
View 1 Replies
View Related
Jul 14, 2011
Used to plot, but now it doesn't. The VG title block is checked.
View 1 Replies
View Related
Jun 1, 2012
When I'm batch plotting several drawings, I'm trying to add a block from a page setup to each print.
View 4 Replies
View Related
